Search

The current-limiting performance of the smoothing reactor is weak. The traditional saturated core-type fault current limiter (TFCL) is better, but will cause the dc circuit breaker (DCCB) to endure high overvoltage, energy absorption and also increase the current fall time. When DCCB recloses on the permanent fault, the whole dc system will face a harmful second shock that cannot be solved effectively by TFCL. To solve the above problems, a secondary active limiting fault current limiter (SAFCL) topology is proposed. It can reduce the DCCB overvoltage and energy absorption greatly. Meanwhile, it can store fault energy and uses it to active limit the current when the DCCB recloses on the permanent fault. The secondary active current limiting effect is better than the first and the DCCB breaking electric stress is lower than the first. First of all, the topology and principle of the SAFCL are introduced. The main electromagnet parameters are then analyzed. The performance of different FCLs are simulated comparatively to verify the superiority of the SAFCL. Final, the experiment is carried out, the comparison with simulations verifies the feasibility of the SAFCL. [ABSTRACT FROM AUTHOR]

Saturated core fault current limiters are effective means to limit short-circuit currents in high voltage power systems. To solve its problems of a low rate of utilization and large loss, this study proposes a multifunctional saturated-core fault current limiter (MFFCL) with a hybrid excitation system. The MFFCL can limit the short-circuit current and control power flow to reduce losses. The composition and topological structure of the MFFCL are provided, an equivalent electromagnetic circuit model of the MFFCL is then established, and its working mechanisms of limiting current and regulating power flow are analyzed. Following this, a finite-element simulation model of the MFFCL is built to investigate its electromagnetic characteristics and verify its performance in terms of limiting current. The power flow regulation function of the MFFCL was verified through the field-circuit coupling method. Finally, a laboratory-scale prototype of the MFFCL and a test platform was designed to test it. The results of the experiments verified the correctness and feasibility of the proposed structure. It can adequately control power flow in its normal state, and can limit the short-circuit current to 60% of the original in case of a fault. [ABSTRACT FROM AUTHOR]

Orthogonal controllable reactors (OCRs) have the advantages of low distortion and linear inductance regulation. However, traditional OCRs suffer from two vital problems, namely, their small inductance regulation range and large space occupation. To solve these issues, a new compact OCR is proposed in this study. First, the magnetic circuit of the reactor is established through theoretical analysis. Second, the simulation model is established and the inductance regulation characteristics of the reactor are obtained. Third, the key parameters are optimized for better performance based on Pareto optimality and a genetic algorithm. Finally, based on the optimized parameters, a new prototype of the OCR is developed and experimental work is carried out to verify the analysis. The results show that, compared with the traditional model, with the same material consumption, the space occupation of the new topology is reduced by 53.7% and the inductance regulation range is increased by 69%. Experimental results also show that increasing the area of the orthogonal region can significantly increase the inductance regulation range of the reactor. Based on the OCR, the filter with a variable resonance frequency can be formed, which is of significant application value in situations where the harmonic frequency is constantly changing. [ABSTRACT FROM AUTHOR]

The traditional saturated core type fault current limiters (TFCLs) cause large energy absorption and high overvoltage in direct current circuit breakers (DCCBs). Energy absorbing FCLs (AFCLs) cause coils to bear the fault current for a long period and the fault energy absorption is slow. In order to solve the problems of TFCLs and AFCLs, a novel fast energy storage dc FCL (EFCL) topology is proposed in this article. The EFCL not only reduces the overvoltage and energy absorption of DCCBs but also quickly stores energy. First, the working principle and topology of the EFCL are proposed. The design requirements of the main electrical and core size parameters are then analyzed. Then, the key electrical parameters are optimized by electromagnetic circuit simulations. The economy is analyzed. Finally, the whole process simulation and FCL comparison simulation are carried out. The feasibility of the EFCL is verified by the comparison of simulation with experiment. [ABSTRACT FROM AUTHOR]

In order to promote the consumption of distributed generations and meet the power flow regulation requirements of the distribution network, a novel multiline fast electromagnetic unified power flow controller for the distribution network (D-MFEUPFC) is proposed. It has the advantages of compact structure, fast response, good economy, and high reliability with the traditional regulation mode. Besides, based on multiwinding transformer and hybrid on-load tap changer, D-MFEUPFC can quickly adjust the multiline power flow of the distribution network and absorb the output of new energy. The operating principles and characteristics of the D-MFEUPFC are analyzed to verify the deductions. Then, the multiline power flow equation considering D-MFEUPFC is derived with the comprehensive load model and power injection method, and its control strategy is studied. Finally, the effectiveness of the proposed D-MFEUPFC is proved by simulations and a prototype experiment. The results show that D-MFEUPFC can quickly adjust the multiline power flow within 60 ms, reasonably absorb the output of new energy, and improve the section transmission capacity. Moreover, D-MFEUPFC can realize decoupling control with high compensation accuracy, and the maximum errors of the active power and reactive power are 8.33% and 3.71%, respectively. [ABSTRACT FROM AUTHOR]

In order to limit the extremely fast rising trend of fault current in a high voltage direct current system, a permanent magnet (PM) biased dc saturated core fault current limiter (DCSFCL) was proposed previously. However, the demagnetization problem of the PM and compromised fault limiting inductance value caused by the inserted PMs are two major issues that need to be solved. In this article, a hybrid-material based fault current limiter (HMFCL) is proposed. First, by means of reconstructing the iron core topology and substituting different soft magnetic materials with their hybrid benefits, the proposed novel HMFCL can present instant change in fault limiting inductance value without threating the safety of the PMs. Then, the Jiles–Atherton hysteresis modeling technique is applied on the HMFCL and its electromagnetic feature is analyzed. The parameters of HMFCL are optimized using genetic algorithm as well. Finally, the effectiveness of the proposed HMFCL is proved by various device and system level simulations as well as a prototype experiment. Results reveal that the proposed HMFCL can limit the fault current by over 80% compared with traditional smoothing reactor. [ABSTRACT FROM AUTHOR]

The inductance of a permanent magnet-biased saturated fault current limiter (PMFCL) increases automatically with the fault current. It can quickly restrain the rising speed of direct current (dc) fault current. However, when the dc circuit breaker (DCCB) opens, the PMFCL will delay the current drop speed and generate overvoltage, which will increase the voltage stress on the DCCB. In this article, a new type of fast-response FCL (NFCL) is proposed. It has the advantage of improving the fault current drop speed. Besides, it can reduce DCCB overvoltage, thus protecting the expensive insulated gate bipolar transistors in the DCCB. In addition, it greatly reduces the energy absorption in the DCCB, thus reducing its manufacturing cost. The NFCL operates automatically without a control device, which means that it responds faster. Moreover, the diode is on the low-voltage side, meaning that insulation manufacturing cost can be reduced. First, the working principle of NFCL cooperation with the DCCB is introduced. Then, the main electromagnetic parameter design requirements of the NFCL are analyzed. Their feasibility is verified by electromagnetic circuit simulation, and a prototype is built and tested. Finally, the experimental and simulation results show that NFCL can improve current drop speed effectively. [ABSTRACT FROM AUTHOR]

A DC system saturated core fault current limiter (DCSFCL) was proposed to limit the fast rising trend of fault current in HVDC system. However, traditional method to calculate and design the DCSFCL tend to neglect leakage flux around the permanent magnet (PM), leading to large calculation error and inappropriate design procedure. The novel contribution of this paper is that it proposed a modularization method to analyze the permeance of both PM and adjacent air. Hence, the leakage flux effect is considered properly and a more accurate permeance matrix can be derived in a pure mathematical way. In this case, DCSFCL can be calculated much faster than the FEA simulation program with a promising accuracy regarding fault limiting performance. More importantly, design flow of the DCSFCL and related PM biased devices was given as well. Calculation result shows that inductance value calculated by the proposed method has less than 1% error compared with fine meshed FEA simulation result and about 20% increase in accuracy compared with traditional method that neglects PM leakage flux effect. Prototype of the DCSFCL was also built and experimental tests were carried out to verify the correctness of the proposed method. [ABSTRACT FROM AUTHOR]

When the fault current in high voltage direct current (HVDC) systems rises to a higher level, the DC circuit breakers will have either insufficient capacity or will require larger sizes with increased costs. Fault current limiters (FCLs) can reduce the turn-off stress and the stringent requirements on breakers, thereby also lowering their cost. The use of saturated core FCLs, which have fast response times and low power loss, is a promising approach for this issue. However, the parameter design principles for this kind of FCL has so far not been discussed in the literature. The design is often based on reactors that does not consider the transient performance. In this study, an optimized design method for permanent magnets saturated core FCLs in HVDC transmission systems, is proposed. The constraint conditions, parameter optimization and modification steps are discussed, and an optimized FCL design is obtained with the lowest cost and expected current-limiting function. Both simulations and experiments are conducted, and the results demonstrate the validation of the proposed method. Finally, a cost evaluation among main types of inductive FCLs is carried out and suggestions for scaling up saturated core FCLs to HVDC applications are given. [ABSTRACT FROM AUTHOR]

To reduce the iron loss and noise of a three-phase reactor composed of grain-oriented (GO) steel plates, two types of core structures are proposed in this article. In the first type, the ordinary brick core model is improved to a hybrid one composed of GO and nonoriented steel plates, and in the second type, the T-joint part of the ordinary oblique-joint core model is improved to a straight joint. To show the effectiveness of the improved models, the iron loss and displacement distributions in the four core structures are evaluated using the 2-D magnetic field and mechanical analyses. In these analyses, the magnetic characteristics of the anisotropic cores are considered in detail. Namely, in the magnetic field analysis, the ${B}$ – ${H}$ curves in the arbitrary directions are considered. In the iron loss calculation, the rotational iron loss is calculated using the iron loss curves in the arbitrary directions. Moreover, the methods of calculating the displacements due to electromagnetism and magnetostriction considering the anisotropic ${B}$ – ${H}$ curves and magnetostriction in the arbitrary directions are proposed. It is shown that the iron losses and displacements of the two proposed core structures can be reduced compared with the ordinary ones. Moreover, the second proposed model is the most attractive one because both the iron loss and displacement are smaller than the other models. [ABSTRACT FROM AUTHOR]

A fault current limiter is an effective mean of limiting fault currents. The simultaneous use of three single-phase current limiters requires significant amounts of ferromagnetic material and space. This article proposes a three-phase saturated-core fault current limiter (T-SCFCL) that employs a common yoke and a permanent magnet to mitigate the restrictions of material and space. T-SCFCL delivers good performance for single-phase, two-phase, and three-phase faults. In this configuration, flux flowing through the permanent magnets is generated by a three-phase unbalanced current, thereby reducing the loss in eddy current and improving stability while significantly reducing the volume of the core. An algorithm is provided for use in the design of the FCL structure. A simulation was conducted based on the finite element method and a prototype manufactured and tested to verify effectiveness. The results prove that the proposed method is efficient. [ABSTRACT FROM AUTHOR]

Large fault direct current with fast rising speed has always been a significant threat to high voltage direct current systems. Fault current limiters (FCLs) are one of the most promising solutions. However, the biased permanent magnets (PM)s in traditional FCLs have large magnetic reluctance that causes FCLs to have small inductance changing ratios when a fault occurs. In this study, a novel three-limb topology of a saturated iron core-type fault current limiter (TSFCL) is proposed and a central PM bias limb is inserted to force flux flow through this limb. Therefore, the inductance changing ratio is greatly enhanced and the steep rising trend of fault current will be restrained effectively. The operating principles and characteristics of the TSFCL are analyzed to verify the deductions. Moreover, different lengths and cross-sectional areas of the inserted PM are tested and optimization study is carried out. The results show that the clipping inductance has a 55% increase compared with a traditional two-limb model. Moreover, compared with the existing smoothing reactor and traditional two-limb model, proposed topology can decrease the fault current by 45% and 16% within 5 ms, respectively. Finally, a typical HVDC system was built and the effectiveness of proposed TSFCL was verified. [ABSTRACT FROM AUTHOR]

Soft magnetic composites (SMCs) are composed of ferromagnetic particles surrounded by electrical insulation. To establish a homogenization technique for the magnetic field analysis of an electrical machine with an SMC core, we have already proposed a method to evaluate the effective permeability and iron loss of the SMC core using a cell model of one particle taking into account the nonlinear magnetic characteristics and eddy currents. However, the measured eddy current loss cannot be represented by using the proposed method. In this article, a 3-D eddy current analysis method modeling the anomalous eddy current loss due to the movement of domain walls in the cell model is developed based on the Pry and Bean magnetic domain model. The effect of the non-uniformity of the domain structure on the anomalous eddy current loss is investigated. It is shown that the measured eddy current loss can be almost represented by adding the anomalous eddy current loss to the classical one. [ABSTRACT FROM AUTHOR]

A novel multi-function saturated-core fault current limiter (MFCL) with two operating modes is proposed in this paper. MFCL can achieve fault current limitation and power flow management by switching operating mode: current-limiting mode and power-flow-controlling mode, which realizes technology convergence. The MFCL consists of an iron core with rotatable magnetic valve, ac coils, dc coils, and a fault-limiting reactor. The operating principle of the MFCL and the design of the rotatable magnetic valve are analyzed in this paper. The finite-element analysis (FEA) model based on Maxwell is used to analyze the MFCL. Simulation results depict that the MFCL can limit fault current effectively and provide variable impedance for power flow controlling. [ABSTRACT FROM AUTHOR]

To evaluate the iron losses of motors and three-phase transformers, the rotational iron loss should be considered. A simple numerical calculation method of the rotational iron losses under rotational flux with high flux density and different axis ratios is proposed in this paper. First, it is shown that the method of decomposing the rotational flux into the directions of the major and minor axes of the rotational flux is effective in calculating the rotational iron losses of the non-oriented and grain-oriented electrical steel sheets in low magnetization region. Then, the simple iron loss calculation method is improved to consider the decrease of rotational hysteresis and anomalous eddy current losses in high magnetization region under circular rotational flux and verified by comparing with measurement results. Furthermore, it is improved to be applicable to rotational iron loss calculation under rotational flux with different axis ratios and verified by comparing with measurement results. [ABSTRACT FROM AUTHOR]

An improved hybrid unified power flow controller (IHUPFC) is developed in this paper to control the power flow and increase the utilization rate of the existing transmission lines. The IHUPFC is composed of an improved “Sen” transformer (IST) and a small capacity unified power flow controller (UPFC). After a detailed introduction of the structure and voltage regulation performance of the IST, this paper derives the capacity relationship between the IST and the UPFC. Then, this paper introduces the technology of the IHUPFC in power flow regulation and transmission capability improvement. Besides, the advantages of the IHUPFC in performance and structure are analyzed. The IST has simpler structure and larger power flow control area than a “Sen” transformer, and the IHUPFC provides a continuous active and reactive power flow control. Simulation and experiment studies are used to verify the practicability and superiority of the IHUPFC. [ABSTRACT FROM AUTHOR]