Search

This article proposes an improved multiple synchronous reference frame (MSRF) current harmonic regulation strategy for dual three phase permanent magnet synchronous machine drive system. A new vector space decomposition transformation combined with auxiliary currents is designed to decouple the current fundamental with current harmonics, and the auxiliary currents can be established by the π/9 phase shifting of the physical currents in ABC set and the π/18 phase shifting of the physical currents in XYZ set. By employing the proposed current decomposition, it is easy to detect them using low pass filters in MSRFs. A generic complex vector proportional integral regulator is then employed to control the detected current harmonics to track the current harmonic references. Compared with the existing MSRF-based methods, the proposed method provides a new current harmonic detection with reduced delay effect, which contributes to enhancing the dynamic performance of current harmonic regulation, and also stabilizing the control system. Comprehensive experimental results are given to validate the effectiveness of the proposed control strategy. [ABSTRACT FROM AUTHOR]

This paper investigates the influence of stator/rotor pole number combinations and permanent magnet (PM) numbers on electromagnetic performance of consequent-pole hybrid excited flux reversal machines (CP-HEFRMs), which have different numbers of PM poles and iron poles and concentrated AC and DC windings on the stator and a salient pole rotor. PMs in the slots of one stator pole are magnetized radially in the same direction, while opposite on adjacent stator poles. Magnetic field paths of DC, PM, and hybrid excitations are investigated. The phenomenon of flux cancellation, i.e., PM and DC MMFs in CP-HEFRMs are of opposite polarities in the flux-enhancing operating mode, is revealed and verified, for the first time, as the key feature that makes CP-HEFRMs different from other hybrid excited machines. Consequently, the saturation in stator pole and yoke can be mitigated and hence the overload capability of DC excitation is enhanced, which is verified by finite element analysis (FEA). Global optimizations are utilized to obtain the optimal rotor and stator pole number combinations and PM numbers for each stator pole. Torque, torque ripple, inductance, unbalanced magnetic force, and flux regulation capability are compared for different PM numbers and rotor pole numbers. Comparisons are made on consequent-pole and non-consequent-pole topologies in terms of torque capacity, flux regulation capability, and PM consumption to further illustrate the advantages of consequent-pole topology. A prototype machine is built and tested to validate the analyses. [ABSTRACT FROM AUTHOR]

In this article, a new dual-permanent magnet spoke-type flux-reversal machine (dual-PM SFRM) for direct-drive applications is proposed. Tangentially magnetized permanent magnets (PMs) sandwiched with iron poles are set in stator slots. To increase the torque density within the geometric restrictions, PMs are introduced in the rotor as well and magnetized radially to form a consequent-pole rotor. Global optimizations are conducted and comparisons are made on torque, torque ripple, and torque/PM volume with the existing single-PM SFRM. It is found that the proposed dual-PM SFRM can produce 22.6% larger torque with an optimal PM volume and a 17.5% larger torque with the same PM volume compared with the single-PM counterpart. Moreover, major magnetic field space harmonics are derived analytically and verified by finite-element analysis (FEA) and the torque components produced by the working harmonics are calculated and compared in terms of different stator/rotor pole number combinations. Comparisons are made on back electromotive force, cogging torque, torque performance, and efficiency between dual-PM SFRM and conventional flux-reversal machine. The influence of different stator configurations, i.e., the slot opening, the iron bridge, and the unequal tooth, on torque performance in the proposed dual-PM SFRM has been studied and highlighted. A prototype has been built and tested to validate the FEA calculations. [ABSTRACT FROM AUTHOR]

Dual three-phase (DTP) permanent magnet synchronous machine (PMSM) systems exhibit high current harmonics due to low impedance to voltage disturbance such as inverter voltage errors and back-EMF harmonics. This article proposes a concept of virtual multi three-phase systems to achieve independent regulation of the current harmonics in a DTP PMSM system. The virtual multi three-phase currents are first reconstructed by appropriately shifting the phase of original physical DTP currents, and then decomposed with the help of vector space decomposition techniques. As a result, the fundamental and the major current harmonics, i.e., the 5th, 7th, 11th, and 13th, can be completely separated in several isolated subspaces, where the independent current control loops can be easily designed and implemented. Compared with existing methods, the steady-state and dynamic-state performance of current harmonic regulation are enhanced by the proposed virtual multi three-phase systems and the effectiveness is validated by experimental. [ABSTRACT FROM AUTHOR]

Consequent-pole (CP) permanent magnet (PM) machines have attracted considerable interest as a means of reducing machine cost through a marked reduction in the volume of PM required to meet a particular torque specification. However, the presence of a large torque ripple that can result from the CPPM structure can hinder their adoption in some applications, especially for the dominant third-order torque ripple. Although several design-specific modifications have been proposed to ameliorate torque ripple, the generalized principles underpinning this behavior have not been fully established. In this article, it will be illustrated that an aggregation of the fluctuations in inductance, back electromotive force, and cogging torque contributes to increased torque ripple. Meanwhile, an asymmetric pole shaping method is proposed to reduce the torque ripple, taking the dominant third-order torque ripple as an example. Both simulated and experimental results of the 12-slot/8-pole prototypes show that compared to the symmetrical pole shaping model and the plain pole model, the proposed asymmetric shaping method is effective in reducing torque ripple. [ABSTRACT FROM AUTHOR]

Consequent pole (CP) permanent magnet (PM) machines offer scope for reducing the quantity of PM material and hence cost compared to more conventional PM machine topologies of the same rating. In this type of machine, the rotor pole arc is usually optimized to realize the largest output torque with pole shaping methods used to reduce torque ripple. However, such approaches tend to be limited by constraints imposed on the pole shapes. It is a common practice to adopt similar PM and iron pole shapes, an approach that does not fully account for the different characteristics of PM and iron poles in CPPM machines, often leading to large even order harmonics in the airgap flux density. This article proposes a shaping method with a variable rotor profile and pole arc span being established by means of optimization by Genetic Algorithm. It is demonstrated that for a fixed quantity of PM material, different PM and iron pole shapes in combination with optimal PM and iron pole arc spans are essential for ensuring both maximum output torque and lower torque ripple when the due account is taken of flux leakage. It also demonstrates that since the flux density in the region under a PM pole is governed by the magnetic potential produced by magnets while it is governed by magnetic reluctance under iron pole, different PM pole and iron pole shapes are necessary to reduce the even-order harmonics in a CPPM machine and consequently to reduce torque ripple. The performances of optimized and more conventional CP machines are compared by finite-element method on 12-slot/8-pole prototype motors. [ABSTRACT FROM AUTHOR]

This article proposes and investigates two asymmetric consequent-pole hybrid excited flux reversal machine (AS-CP-HEFRM) topologies, which have same numbers of iron poles and permanent magnets (PMs) with concentrated ac and dc windings on each stator pole and a salient pole rotor. If PM number on one stator pole is larger than 1, PMs are magnetized radially in the same direction on one stator pole, while opposite on adjacent stator poles. The phenomenon of the phase shift between the flux linkages of dc and PM excitations in the AS-CP-HEFRMs is revealed for the first time, which will weaken the regulation of dc excitation field to PM produced field. The elimination condition of the phase shift is derived and verified by finite-element analysis in this article, which can be considered as design guidelines in AS-CP-HEFRMs. Airgap magnetic field space harmonics of AS-CP-HEFRM are also investigated and verified by finite-element analyses. Meanwhile, the relationship between the rotor pole number and the stator pole arc (PM ratio) is derived and verified by global optimization based on genetic algorithm for maximum average torque. The influence of stator/rotor pole number combinations is also studied and compared in terms of torque, torque ripple, and flux regulation capability. The torque components produced by airgap magnetic field space harmonics are calculated and compared. A prototype has been built and tested to validate the finite element calculations. [ABSTRACT FROM AUTHOR]

In this article, two novel sinusoidal pulsewidth modulation (SPWM) strategies with simple implementation are proposed for an open-winding machine fed by isolated dc-bus dual two-level three-phase inverters to reduce switching frequency and current harmonics. The proposed strategies utilize zero sequence voltage injection and unbalanced reference voltage distribution to generate discontinuous PWM with low current harmonics and less switching action. Two different zero sequence voltages are introduced in this article corresponding to two proposed PWM strategies with different switching actions in a PWM cycle. The novelty of this article is low current harmonics and less switching actions in a PWM cycle compared with the conventional SPWM strategy. Moreover, compared with the subhexagonal center PWM strategy, the proposed SPWM strategies have advantages of easy implementation and half switching commutations with the same current harmonic characteristics. The superiority of the proposed SPWM strategies is validated by simulation and experiment results. [ABSTRACT FROM AUTHOR]