Search

This article proposes and investigates two asymmetric consequent-pole hybrid excited flux reversal machine (AS-CP-HEFRM) topologies, which have same numbers of iron poles and permanent magnets (PMs) with concentrated ac and dc windings on each stator pole and a salient pole rotor. If PM number on one stator pole is larger than 1, PMs are magnetized radially in the same direction on one stator pole, while opposite on adjacent stator poles. The phenomenon of the phase shift between the flux linkages of dc and PM excitations in the AS-CP-HEFRMs is revealed for the first time, which will weaken the regulation of dc excitation field to PM produced field. The elimination condition of the phase shift is derived and verified by finite-element analysis in this article, which can be considered as design guidelines in AS-CP-HEFRMs. Airgap magnetic field space harmonics of AS-CP-HEFRM are also investigated and verified by finite-element analyses. Meanwhile, the relationship between the rotor pole number and the stator pole arc (PM ratio) is derived and verified by global optimization based on genetic algorithm for maximum average torque. The influence of stator/rotor pole number combinations is also studied and compared in terms of torque, torque ripple, and flux regulation capability. The torque components produced by airgap magnetic field space harmonics are calculated and compared. A prototype has been built and tested to validate the finite element calculations. [ABSTRACT FROM AUTHOR]

The induced voltage ripple in DC field windings can cause many problems in hybrid excitation machines (HEMs). It can generate ripple current in field winding, thus causing unsteady magnetic field excitation and hence additional torque ripple and losses. Besides, the torque and power density of hybrid excitation machines may be deteriorated as a result of the influence of the induced voltage ripple on field winding's excitation circuit, particularly under high-speed conditions. Based on a hybrid excitation switched flux machine (HESFM), the influence of stator slot and rotor pole number combination on no-load and on-load field winding induced voltage ripples are studied and compared by the finite element method (FEM). It reveals that the harmonic content and thus the peak-to-peak value of the field winding induced voltage ripple are closely related to the stator slot and rotor pole number combination at both no-load and on-load operating conditions. The FEM calculations are verified by experiments on a prototype HESFM. [ABSTRACT FROM AUTHOR]

The dc winding induced voltage in hybrid-excited machines can lead to dc winding current ripple and hence, fluctuating field excitation. It may also challenge the dc power source and increase the difficulty of machine control, especially at high speed. The dc winding induced voltage in a hybrid-excited switched-flux permanent magnet (HESFPM) machine is investigated in this article. The phenomenon and mechanism of the dc winding induced voltages under both open-circuit and on-load conditions are analyzed, with particular emphasis on on-load operation which consists of open-circuit induced voltage and armature current induced voltage, respectively. Two techniques, i.e., rotor step skewing and unequal rotor teeth, are proposed and comparatively investigated by the finite-element (FE) method to suppress the dc winding induced voltage under on-load condition. FE results show that the peak-to-peak value of on-load dc winding induced voltage can be effectively suppressed by 96.15% or 89.05% by rotor step skewing or unequal rotor teeth, respectively, while the average on-load electromagnetic torque can be maintained at 89.4% or 87.8%. A prototype HESFPM machine is built and tested to verify the FE results. [ABSTRACT FROM AUTHOR]