Search

This paper proposes an electromagnet-assisted ferrite magnet motor (EMaFM) with a double air-gap structure. To confirm the principle and validity of the proposed EMaFM, a prototype machine was designed and fabricated. Moreover, the electromagnetic performance of the prototype machine was simulated using a finite-element analysis (FEA) and was supported by experiments. The proposed EMaFM has field regulation capability while utilizing the ferrite magnets. From the FEA and experimental results, it was found that the torque can be controlled widely by the armature current or field current. [ABSTRACT FROM AUTHOR]

This paper investigates the appropriate permanent magnet (PM) arrangement of novel flux-modulating synchronous machines (FMSMs) in which PMs are embedded in the stator back iron. Using finite element analysis (FEA), three types of FMSMs with different PM arrangements are designed, and their performance characteristics are compared. As a result of the investigation, it was found that the FMSM with a V-shaped PM arrangement has a higher torque capability than do other FMSMs. The accuracy of the FEA simulations was confirmed through experiments on a prototype machine. [ABSTRACT FROM AUTHOR]

The output of permanent-magnet-assisted synchronous machines is maximized under constant permanent magnet (PM) volume and machine size by optimizing rotor shape. An automatic shape optimization method combining Rosenbrock's method and adaptive finite-element method is applied for the optimization. Then, a prototype machine is manufactured due to the result of the optimization in order to confirm the validity. It is clarified that the output of the optimized machine significantly increases without decrease in efficiency, increase in PM volume, and increase in machine size compared with that of the conventional machine. [ABSTRACT FROM PUBLISHER]

Permanent-magnet-assisted salient-pole synchronous machines (PMa-SMs) are a new type of salient-pole synchronous machines that has PMs between the adjacent pole shoes. The PMs have the ability to improve the output power and the terminal voltage. In this paper, a simple magnetic circuit of PMa-SMs is presented. Using the magnetic circuit, the electric and magnetic basic characteristics of PMa-SMs are calculated. The results are compared with the results by measurements and finite-element analysis (FEA). They have shown that the magnetic circuit calculates the characteristics of PMa-SMs with satisfactory accuracy and that the computational time of the magnetic circuit is much smaller than that of FEA. Influence of the pole-shoe magnetic reluctances on the calculation accuracy by the magnetic circuit is also discussed, and some guidelines to enhance the accuracy have been presented. [ABSTRACT FROM PUBLISHER]

In this paper, the core losses that occur in a 4-kVA flux-modulating synchronous machine (SM) (FMSM) are investigated using 2-D finite-element analysis, and the results are supported by experiments. A method for reducing the core losses is also presented. The FMSM is a new type of multipole SM in which the stator field magnetomotive force is modulated by the air-gap permeance to generate the rotating field. A 2pa-pole three-phase armature winding and a 2pf-pole field winding are centrally wound around individual stator teeth, and a reluctance rotor with 2pr\ (= pa + pf) saliencies is used to provide a magnetic coupling between these windings. As a result of the investigation, it was found that, although the core losses occur in the rotor as well as in the stator, the rotor core loss can be effectively reduced by decreasing the height of the rotor poles. [ABSTRACT FROM AUTHOR]

To improve output performance of salient-pole synchronous machines, permanent-magnet-assisted salient-pole synchronous machines (PMa-SMs) that have permanent magnets (PMs) between the field poles were previously developed. The PM effect of increasing the output power and the terminal voltage has already been confirmed by finite element analysis (FEA) and experiments under steady states. In this paper, demagnetization in the PMs due to sudden three-phase short circuits is evaluated by FEA. The results show that irreversible demagnetization arises in the PMs of a PMa-SM with relatively smaller circumferential PM length. Effects of the PM shape and damper bars on the irreversible demagnetization are also investigated. The results show that making the PM shape a rectangle and adding damper bars on the outer surfaces of the PMs are effective to reduce the demagnetization, while increasing the number of the conventional damper bars is not effective. [ABSTRACT FROM PUBLISHER]

This paper presents a new type of multipole synchronous machine (SM) in which 2pa-pole armature and 2pf-pole field windings are centrally wound around individual stator teeth. The proposed machine operates as a (2pa + 2pf)-pole SM by providing a magnetic coupling between the armature and field windings through a 2pr-pole reluctance rotor. A 4-kVA (32 + 48)-pole prototype machine was designed and built to validate the principle of this structure. Performance characteristics of the prototype machine were simulated using 2-D finite-element analysis (FEA) and were supported by experiments. In addition, the effects of the rotor pole shape on the performance characteristics were studied through 2-D FEA simulations. The results presented provide guidelines for the optimum design of the proposed machine. [ABSTRACT FROM PUBLISHER]

The characteristic improvements of salient-pole synchronous generators by inserting additional permanent magnets are investigated from both results of finite-element analyses and experiments. First, the assist effects of the magnets in a megavoltampere-class generator are analyzed by the finite-element method. It is clarified that the additional permanent magnets have the effects of reducing magnetic saturation at the rotor-pole bodies, as well as the effects of increasing the direct flux linkage of armature windings. It is also clarified that the output of the generator can be increased by more than 20% by inserting the magnets without any increase in total machine size and decrease in efficiency. Finally, the characteristic improvements are validated by the experiment of a small prototype generator. The experimental and calculated results are found to be in good agreement. [ABSTRACT FROM PUBLISHER]

In this paper, we investigate the mechanism of output increase by inserting additional permanent magnets in salient-pole synchronous machines. The machines are modeled not only by finite element methods but also by a simple nonlinear magnetic circuit in order to express the assist effects of permanent magnets by simple theoretical expressions. The no-load saturation curves obtained by the finite element method and the magnetic circuit are compared with those of measurements in order to confirm the validities. It is clarified that the accuracy of the proposed magnetic circuit is nearly identical to that of the finite element method. Furthermore, the mechanism of the output increase by the permanent magnets is revealed by the theoretical expressions derived from the magnetic circuit equations. [ABSTRACT FROM AUTHOR]

This paper presents a simple mathematical model for the steady-state analysis of a permanent-magnet-assisted salient-pole synchronous generator (PMa-SG). The PMa-SG is a new type of salient-pole SG that has PMs between the adjacent pole shoes. The developed model takes into account the magnetic saturation and core loss, and enables quantitative predictions of load characteristics from the no-load test data. The validity of the developed model is confirmed experimentally. The effect of the PMs on the performance characteristics of the PMa-SG is also investigated. [ABSTRACT FROM AUTHOR]

This paper presents the modeling and steadystate performance of a novel dual-winding reluctance generator (DWRG) that uses a multiple-barrier (MB) rotor. A simple mathematical model was developed, and the effects of external parameters (speed, field current, and load) on the steady-state performance were analyzed. Experimental results conducted on a prototype machine were also provided to justify the theoretical approach and performance calculations. The developed model takes into account the magnetic saturation and core loss and enables a quantitative prediction of load characteristics from the no-load test data. [ABSTRACT FROM AUTHOR]

Doubly fed generators have been used as adjustable-speed pumped-storage generator motors and wind turbine generators. Accurate determination of field currents and reactances is important for the design of these machines. We propose a calculation method to obtain the field currents and reactances of machines with rotor duct pieces under any steady-state balanced load condition. The method links two-dimensional static finite-element analysis (FEA) with an approximate calculation to consider three-dimensional (3-D) skin effect in the duct pieces. Its advantage is that the computational time is much smaller than 3-D transient FEA when the slip frequency is not zero. The method will contribute to improvement of the design of doubly fed generators with rotor duct pieces. It was applied to a 395 MVA machine, and the calculated field currents agreed well with the measurements. Variation in the reactances due to saturation is also discussed. [ABSTRACT FROM AUTHOR]

A simple magnetic circuit of salient-pole synchronous machines is presented. A method for calculating steady-state electrical performances using the circuit is described. Magnetic saturation including the cross-magnetizing phenomenon is considered in the method. The saturated reactances, field currents, and load angles are calculated easily from the method without much computational effort as compared with the finite element method. Despite the simplicity of the magnetic circuit, the calculated reactances at various load conditions using the method are close to the measured and FEM values. [ABSTRACT FROM AUTHOR]

It is important to understand the relationship between leakage flux distributions and machine characteristics for better design of synchronous machines. This paper presents a calculation method for leakage inductances of saturated salient-pole machines with damper circuits. All leakage inductances are divided into the self-leakage, gap leakage, and winding-differential leakage inductances. The leakage inductances correspond directly to the leakage flux distributions in the machines. Crossmagnetizing inductances are also calculated. The method is applied to a 300-MVA class generator. The relationship between the winding distributions, flux distributions, saturation, and inductances is discussed. Weak magnetic influence of the damper circuits on the armature in the d-axis is quantitatively illustrated through values of the winding-differential leakage inductances. The cross- magnetizing inductances, except for the d-axis damper circuits, are relatively large. Variations of the armature self-leakage inductances with saturation are small, and variations of the field and damper self-leakage inductances are larger. [ABSTRACT FROM AUTHOR]