Search

Simulations of heat fluxes to the plasma facing components in the Wendelstein 7-X stellarator will be tested in its next operational phase. The simulations consist of core transport calculations that determine the evolution of the kinetic profiles and the toroidal current, which modifies the fluxes to the divertor, as the magnetic geometry changes. An additional divertor component, the scraper element, was designed to protect the edges of the primary divertor throughout this evolution during certain high-power long-pulse operational scenarios. The effect of unknown parameters of the heat flux calculations, namely, the cross-field thermal diffusivity and the magnetic field structure, is explored. The predicted scaling of the heat flux widths and magnitudes is presented, along with a new method of calculating the 3-D magnetic field structure required to perform the flux calculations. [ABSTRACT FROM AUTHOR]

Heat load calculations have indicated the possible overloading of the ends of the water-cooled divertor facing the pumping gap beyond their technological limit. The intention of the scraper is the interception of some of the plasma fluxes both upstream and downstream before they reach the divertor surface. The scraper is divided into six modules of four plasma facing components (PFCs); each module has four PFCs hydraulically connected in series by two water boxes (inlet and outlet). A full-scale prototype of one module has been manufactured. Development activities have been carried out to connect the water boxes to the cooling pipes of the PFCs by tungsten inert gas internal orbital welding. This prototype was successfully tested in the GLADIS facility with 17 MW/m2 for 500 cycles. The results of these activities have confirmed the possible technological basis for a fabrication of the water-cooled scraper. [ABSTRACT FROM AUTHOR]

The availability of future fusion devices, such as a fusion nuclear science facility or demonstration fusion power station, greatly depends on long operating lifetimes of plasma facing components in their divertors. ORNL is designing the Material Plasma Exposure eXperiment (MPEX), a superconducting magnet, steady-state device to address the plasma material interactions of fusion reactors. MPEX will utilize a new high-intensity plasma source concept based on RF technology. This source concept will allow the experiment to cover the entire expected plasma conditions in the divertor of a future fusion reactor. It will be able to study erosion and redeposition for relevant geometries with relevant electric and magnetic fields in-front of the target. MPEX is being designed to allow for the exposure of a priori neutron-irradiated samples. The target exchange chamber has been designed to undock from the linear plasma generator such that it can be transferred to diagnostics stations for more detailed surface analysis. MPEX is being developed in a staged approach with successively increased capabilities. After the initial development step of the helicon source and electron cyclotron heating system, the source concept is being tested in the Proto-MPEX device. Proto-MPEX has achieved electron densities of more than 4 \times 10^19~\textm^-3 with a large diameter (13 cm) helicon antenna at 100 kW power. First heating with microwaves resulted in a higher ionization represented by higher electron densities on axis, when compared with the helicon plasma only without microwave heating. [ABSTRACT FROM AUTHOR]