Search

The large aperture superconducting beam separation dipole (D1) must be developed as part of the high luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN. The most important specifications of the D1 are a coil aperture of 150 mm and field integral of 35 T·m at 12.0 kA and 1.9 K. The technical challenges of this magnet include predicting the changes in the size of the coils during fabrication, achieving a high radiation resistance, and management of the iron saturation. KEK is in charge of developing the D1. After conducting a series of design studies, a design consisting of a single-layer coil based on Nb–Ti technology with a collared yoke structure was selected. The fabrication of the first 2 m model of the D1 started at KEK in 2015. Newly developed radiation resistant glass-fiber-reinforced-plastics were utilized as coil parts in the accelerator magnets for the first time. The 2 m model was subjected to two cycles of cold test in the vertical cryostat at KEK. In this paper, we report on the fabrication of the 2 m model. We also present and discuss the quench test results from the perspective of the coil prestress. [ABSTRACT FROM PUBLISHER]

KEK has been developing a beam separation dipole magnet for the high luminosity large hadron collider upgrade. The magnet has a coil aperture of 150 mm and uses NbTi superconducting cable. A dipole magnetic field of 5.6 T is generated at 12 kA at 1.9 K to provide a field integral of 35 T⋅m. KEK has started the development of the first 2-m-long model magnet to evaluate the design and performance of the beam separation dipole magnet. The excitation test at 1.9 K of the first 2-m-long model magnet was performed from April to June 2016 at KEK. This paper presents the results of the magnetic field measurements of the first 2-m-long model magnet by a rotating coil probe. [ABSTRACT FROM PUBLISHER]

The first commissioning of a magnet system for the neutrino beam line in the J-PARC has been performed from January to March, 2009. The magnet system could be cooled down successfully in 9 days. RRRs of all the magnets and joint resistances in the magnet string were measured to be reasonable values. The magnet string composed of 28 superconducting combined function magnets could be excited up to 5000 A after several shutdown tests without a spontaneous quench. A quench protection scheme with a magnet safety system developed by CEA/SACLAY were verified to work properly. As for beam commissioning, the proton beams could pass through the arc section including the superconducting magnet string on the first attempt, and the magnet protection system were verified to work quite well even in a beam induced quench test. [ABSTRACT FROM AUTHOR]

The first full-scale prototype magnet system assembled with the cryostat for the J-PARC proton beam line of neutrino experiment was successfully developed and tested. Two superconducting combined function magnets have been installed into the cryostat. The magnets were successfully cooled down to 4.5 K by forced flow supercritical helium and excited up to the current of 7345 A which is the nominal current of 50 GeV proton beam. The spot heater quench test showed that the quench characteristics in the supercritical helium were very similar to that in the liquid helium at 4.2 K, 1 atm. The quench protection scheme with both cold diodes and quench protection heaters was tested, and it has been verified that the magnet can be protected with safe margin. [ABSTRACT FROM AUTHOR]

Superconducting combined function magnets for the J-PARC (Japan Proton Accelerator Research Complex) neutrino experiment have been successfully developed at High Energy Accelerator Research Organization, KEK. The first prototype magnet reassembled for the quench protection studies, and the cold test result indicated that the eight quench protection heaters are effective for the safe protection of the magnet. Three production magnets have been fabricated and tested at 4.5 K, 1 atm, in a vertical cryostat, and the excellent excitation and quench performances are observed. In the field measurement during cold tests, all the magnets indicated the field qualities good enough to fulfill the specification. The field measurement at room temperature has been also performed with the three production magnets for checking the dipole field component. The results are consistent with the computation. [ABSTRACT FROM AUTHOR]

Superconducting combined function magnets are adopted for the 50 GeV, 750 kW proton beam line for the J-PARC neutrino experiment, and two full-scale prototype magnets have been developed successfully at KEK. In the cold tests, both prototypes were excited up to 7700 A without spontaneous quenches. The measured field quality of the both prototypes agreed well with the design field, indicating that the fabrication process has no major problem. The heater quench tests of the first prototype, however, showed that the magnet was not self-protected. Consequently, the design was revised and quench protection heaters were adopted. In quench heater tests of the second prototype magnet using small sheet heaters, the fundamental characteristics of the quench protection heaters were studied. [ABSTRACT FROM AUTHOR]