Search

The purpose of this work is to study the dielectric charging of polymer fibers with the electron plasma charging effects accompanied by the emergence of waves propagating along the polymer fiber surface. Monitoring of the charge propagation along the single fiber has been performed using dielectric polyhydroxybutyrate (PHB) fibers obtained by the electrospinning (ESP) method under the electron beam inside the scanning electron microscope chamber. The mechanical effect of the electron beam on the polymer fibers has been detected in a time-lapse mode. The influence of the polymer surface irregularities and mechanical defects on the fiber charging has been demonstrated. Plasma mechanism is typical not only for electrophysical phenomena but also for the control of mechanical movement of the fibers by the electron beam and the charge propagation during electron-beam-induced melting and in the presence of hydrodynamic polymer flows. It is assumed that the mechanical effect in the methods using an electron beam (and plasma on the dielectric surface) as an impact source can be determined by the following factors: pressure of the electron beam and the electric field, contribution of the secondary emission, thermal/thermomechanical factors, and dynamic balance or competition between all the forces affecting the sample (electron-beam pressure, gravity pressure, recoil pressure during evaporation, vapor pressure/surface tension, and so on). In addition to purely scientific interest, the above phenomena are also of significant applied interest since the influence of the polymer fiber charging on the separation procedure of aerosols in nonwoven filters is well known, and hence, charging of such polymer fibers is important for some energy storage devices. [ABSTRACT FROM AUTHOR]