Search

Plasma-jet systems and plasma devices of dielectric barrier discharge (DBD) are introduced for biomedical applications. To achieve the purpose of being safe and user friendly, these devices have been developed to avoid electric shock and thermal damage. These types of plasma equipment operate with a sinusoidal voltage of kilovolts at a low frequency of several tens of kilohertz. The plasma jets have been developed with the specific ground-electrode structures according to the various gases in use, such as inert gases, molecular gases, or mixture gases, and air. The Ar-plasma jet with the external ground electrode is operated in a low current of 1–2 mA with the voltage of 1–2 kV. The stable air-jet plasma/plume exiting from a small hole at the cold metal-cap nozzle of the ground electrode can be obtained in a low current of 0.5–1 mA for safety with the voltage of 5–10 kV. Both types of ground electrode, the external electrode and the metal-cap electrode, are applicable to the plasma jets of molecular or mixture gases. The devices for DBD plasmas are shown to be the new advents of plasma stamp, plasma stick, plasma comb, and plasma roller, which operate with the voltage of 2–3 kV. [ABSTRACT FROM PUBLISHER]

An X-band, low-noise, linearized microwave power amplifier module consisting of a low-noise solid-state amplifier (SSA), predistortion linearizing circuit, and low-gain helix traveling wave tube (TWT) is designed and tested in order to demonstrate both reduced noise figure and suppressed intermodulation distortion ratio. Two-tone intermodulation distortion (IMD) ratios are predicted from simulations obtained from modeling of the TWT, linearizing circuit, and SSA by the use of Agilents Advanced Design System simulation code. Simulated IMD ratios are in good agreement with measured results. Measurements show a noise figure of 2.2 dB at 9.5 GHz and the third-order IMD ratio of -53 dBc at 10 dB input back off from the input P1dB point It is found that both noise figure and IMD ratio are significantly improved compared with conventional helix-TWTs and microwave power modules. [ABSTRACT FROM AUTHOR]

Describes the studies and experimental results of 35 GHz, two-cavity gyroklystron amplifier. Major components of the two-cavity gyroklystron amplifier; Comparison of the results with nonlinear simulations; Conclusion.