Search

A direct space-charge force model has been implemented in the tracking code elegant [1]. The user can simulate transverse space-charge effects by inserting space- charge elements in the beamline at any desired position. Application to the international linear collider damping ring is presented in this paper. We simulated beam under equilibrium conditions, as well as the entire damping cycle from injection to extraction. Results show that beam halo is generated due to space-charge effects. This would be a significant concern for the ILC damping ring and a detailed follow-up study is needed.

The advanced photon source (APS) recently held a workshop on upgrade options for the APS storage ring. Several options were discussed that included both storage ring and energy recovery linac options. Here we present a storage ring lattice that fits into the APS tunnel and has a number of significant improvements over the existing storage ring. The present APS lattice has 40-fold symmetry with each sector having one 5-m-long straight section for insertion device (ID) placement. Each sector also provides one beamline for radiation from the bending magnet. The upgrade lattice preserves locations of the existing insertion devices but provides for increased ID straight section length to accommodate 8-m-long insertion devices. This lattice also decreases emittance by a factor of two down to 1.6 nm-rad. And last but not least, it provides two additional 2.1-m-long ID straight sections per sector with one of these straight sections being parallel to the existing bending magnet beamline. We also present dynamic aperture optimization, lifetime calculations, and other nonlinear-dynamics-related simulations.

We recently studied a lattice achieving 1 -nm emittance at the APS storage ring [1]. The successful design required very strong sextupoles in order to tune the machine to the desired positive chromaticity. A preliminary design of such magnets indicated saturation in the poles unless the vacuum chamber gets smaller by a factor of two compared to the existing APS chamber. Since the resistive wall impedance scales as 1/b3, where b is the radius of the chamber, we questioned how much current we can store in a single bunch at the 1-nm storage ring. In order to answer this question quantitatively, we calculated all wake potentials of impedance elements of the existing APS storage ring with the transverse dimension properly scaled but with the longitudinal dimension kept unchanged. With the newly calculated impedance of a smaller chamber, we estimated the single- bunch current limit. It turned out that the ring with a smaller chamber would not diminish the single-bunch current limit substantially. We present both wake potentials of 1-nm and the existing rings followed by the simulation results carried out for determining the accumulation limit to the ring.

We present a lattice design based on the theoretical- minimum-emittance (TME) cell for the international linear collider (ILC) 6.6-km 5-GeV damping ring. Several areas are discussed: momentum compaction, lattice layout, injection and extraction, circumference adjusters, phase adjuster, and dynamic aperture calculation with multipole errors.

We present a triple-bend lattice design that uses the current APS tunnel. The new lattice has a 1 nm-rad effective emittance at 7 GeV. A forty-period symmetric optics is presented. For the benefit of some X-ray user experiments, an optics with four special straight sections of one-third the beam size of normal sections was investigated as well. The associated nonlinear optical difficulties are addressed and simulation results are presented.