Search

A two-stage compact bushing has been developed by CEA-Cadarache and installed on its 1-MV testbed. This bushing acts as high-voltage feedthrough between a transmission line under pressurized nitrogen or sulfur hexafluoride (SF6) gas and a vacuum tank with a volume of 30 m3. The bushing has been successfully tested up to 420 kV. Electron field emission causes a dark current to flow between the electrodes in the vacuum, both inside or outside the bushing in the vacuum tank. High-voltage conditioning leads to a significant reduction in this dark current. The dark current can be further reduced or even suppressed by adding low-pressure (~1 mPa) nitrogen or SF6 gas to the vacuum. [ABSTRACT FROM AUTHOR]

Numerical experiments are carried out on a low-energy (2.2 kJ) Mather-type Egyptian Atomic Energy Authority-Plasma Focus (EAEA-PF1) to investigate the optimum combination of all electrode system dimensions and gas pressure for maximum argon soft X-ray (SXR) yield, $Y_{\mathrm {SXR}}$ , using Lee Model RADPF5.15. This paper aims to finalize the first step prior to building an automated method of optimization that could be applied when a low-energy dense plasma focus is designed or need to be reconfigured, for this purpose, and to assist further research efforts in this field. The second part of the study deals with the investigation of the role of changing outer electrode radius “b” and the outer to inner radii ratio “c” on plasma focus (PF) parameters such as ion density, pinch duration, and column length and how are these, consequently, related to the maximum SXR yield. It is shown that lower radius ratio values (typically less than 2) are favored over higher ones, for argon SXR yield, and unlike most of the low-energy PF devices that are designed for this purpose. It is also shown that inductance and pinch current are only affected by the dimension of inner electrode radius, while the ion density, pinch duration, and focus volume are also affected by the change of outer electrode radius. [ABSTRACT FROM AUTHOR]

In this paper, the capacitances of the two-stage bushing that is installed in the 1-MV test bed for neutral beam injectors in the future fusion reactors are calculated by modeling the bushing in a 3-D electrostatic code. One of the modeling results is the stored energy in the bushing, which corresponds to 1/2 CV2. After evaluating the bushing capacitance, a MATLAB/Simulink model is presented to model the possible breakdown in the bushing and between the electrodes in the 1-MV test bed. When a breakdown occurs between anode and cathode, an overcurrent is drawing that can cause damage in the electrode surfaces while an overvoltage takes place when the breakdown happens between the bushing stages. Such damage has been observed experimentally in the past. This paper also presents some of the possible protection against the breakdown in the 1-MV test bed to dissipate the stored energy in order to protect the electrode surfaces and the bushing. The suggested protections presented in this paper are damping resistors, surge arrester individually, and both of them. Also, a coil can be added to the DR either in series or in parallel. [ABSTRACT FROM AUTHOR]