Search

The Soil Moisture and Ocean Salinity (SMOS) satellite is performing systematic L-band observations since 2009, allowing a large number of science and operational applications. Several recent studies have shown the need of the continuity of L-band observations, in particular with an increased angular resolution. In this contribution, two instrumental concepts are presented to reach native resolutions of 5–10 km. In addition, using airborne data, it is also shown that the accuracy of downscaling coarser resolution L-band data to 5–10 km using a high resolution auxiliary data set, is significantly lower than that of native high resolution observations.

Inland water storage is a key reservoir in the continental water cycle but the scientific knowledge about its spatio-temporal dynamic is still poor, especially over tropical areas. By coupling the Soil and Water Assessment Tool (SWAT) model and the Soil WAter Fraction (SWAF) data to increase the inundation delineation precision, inland water storage in the Madeira Basin located in Southern Amazon Basin was computed from 1998 to 2018 each day. During this period, the maximum of water storage was reached in March every year and varied from $3.01\times 10^{11}\ \mathrm{m}^{3}$ to $1.22\times 10^{11}\ \mathrm{m}^{3}$ . The Madeira Basin and each floodplain section have a peculiar temporal hydrologic response. The methodology presented in this paper can be extended to the entire Amazon Basin and other large-scale watersheds.

The last decade has witnessed a series of extreme droughts across the globe. The impacts of these droughts have been devastating for the ecosystem and human activities. In this paper we present the assessment of the drought events in the last decade from the remote sensing-based root zone soil moisture anomalies. The root zone soil moisture is obtained from the SMOS surface soil moisture. And the drought index is defined as the monthly anomaly of the root zone soil moisture. Our results show the distribution of droughts over the last decade in various regions across the globe.

Physical models simulating the radiative budget (RB) and remote sensing (RS) observation of three-dimensional (3D) landscapes are critical to better understand human and natural components of the Earth system and further develop RS technology. DART is one of the most comprehensive 3D models of Earth-atmosphere optical radiative transfer (RT), from ultraviolet (UV) to thermal infrared (TIR). It simulates the optical signal of proximal, aerial and satellite imaging spectrometers and laser scanners, the 3D RB and solar induced chlorophyll fluorescence (SIF) signal, for any urban or natural landscape and any experimental or instrument configuration. It is freely available for research and teaching activities (https://dart.omp.eu). Here, five recent advances are presented. 1) Atmosphere RT. 2) RT in non repetitive topography. 3) Monte Carlo modelling for fast RS image simulation of large landscapes. 4) SIF modelling for vegetation simulated as facets and turbid cells. 5) RS image inversion for mapping the optical properties of urban material and the urban radiative budget.

Remote sensing (RS) dedicated to the study of land surfaces benefits from more and more advanced sensors. However, the interpretation of RS data is often is often inaccurate due to the complexity of the observed land surfaces. Therefore, RS models, in particular physical models, that simulate RS observations of the three-dimensional (3D) landscapes are critical to correctly interpret RS data. DART is one of the most comprehensive 3D models of Earthatmosphere optical radiative transfer (RT), from ultraviolet (UV) to thermal infrared (TIR). It simulates the optical signal of proximal, aerial and satellite imaging spectrometers and laser scanners, the 3D RB and solar-induced chlorophyll fluorescence (SIF) signal, for any urban or natural landscape and any experimental or instrument configuration. It is freely available for research and teaching activities (dart.omp.eu). After illustrating three significant sources of inaccuracy in RS interpretation, five recent DART advances are presented: RT in the atmosphere and topography, fast RS image simulation of large landscapes, SIF modelling, and satellite image inversion.

The Middle East-North Africa (MENA) region has a prevailing hot and dry climate. The increasing demographic pressure brings an increased demand on water resources. In this study, we analyzed the drought dynamics using precipitation and soil moisture remote sensing data over the MENA region in the last two decades. Two types of remotely sensed micro-wave datasets (i.e. TRMM 3B43 and ESA-CCI SM) were used, to depict meteorological and agricultural droughts. Our results showed that the Standardized Precipitation Index (SPI) [1] from TRMM showed a good correlation with SPI from in-situ rainfall data and predicted successfully historical droughts. The standardized index shows lesser extreme agricultural droughts than meteorological drought for the same period. The region faced the biggest number of extreme meteorological droughts in 2015 and the biggest number of extreme agricultural droughts in 2013. These outputs help local and regional water management authorities as well as policy makers in combating water scarcity in the region. Further studies will look into optical remote sensing.

The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite has provided, for the first time, systematic passive L-band (1.4 GHz) measurements from space. This new data set, with a spatial resolution of ~40 km, has allowed a number of outstanding results over land (soil moisture, vegetation properties, frozen soils, …), ocean (salinity, meso-scale phenomena, river plumes, high winds, …) and cryosphere. SMOS, together with the NASA missions SMAP and Aquarius, have demonstrated the interest of the continuity of L-band observations. However, higher spatial resolution (1–10 km) is needed for applications related to water resources management and food security, for instance. Over the ocean as well as in coastal areas, higher resolution will bring the possibility to study in detail meso-scale processes and salinity (and density) variations closer to the coast. Over ice, higher spatial resolution will allow to monitor melting events in the coastal regions of Antarctica, for instance. In order to ensure the continuity of Earth observations in the L-band, while improving the resolution of the current generation of radiometers, new mission concepts are needed. We present the SMOS-HR (High-Resolution) project, which is currently in Phase 0 at CNES (Centre National d’Etudes Spatiales).

Neural networks were used to estimate the ability of different sets of predictors to capture the variability of above ground biomass (AGB). SMOS brightness temperatures (TBs) for only two incidence angles capture 85% of the AGB variance. Adding soil moisture or L-band vegetation optical depth (L-VOD) increase the ability to capture the AGB variance to 90 % and 92 %, respectively. With respect to using only TBs, L-VOD improves the AGB estimation in regions of low vegetation.

Models that simulate the radiative budget (RB) and remote sensing (RS) observation of landscapes with physical approaches and consideration of the three-dimensional (3-D) architecture of Earth surfaces are increasingly needed to better understand the life-essential cycles and processes of our planet and to further develop RS technology. DART (Discrete Anisotropic Radiative Transfer) is one of the most comprehensive physically based 3-D models of Earth-atmosphere optical radiative transfer (RT), from ultraviolet to thermal infrared. It simulates the optical 3-D RB and signal of proximal, aerial and satellite imaging spectrometers and laser scanners, for any urban and/ or natural landscapes and for any experimental and instrumental configurations. It is freely available for research and teaching activities. Here, an application is presented after a summary of its theory and recent advances: inversion of Sentinel 2 images for simulating time series of urban radiative budget ‘Q* sw ’ maps through the determination of maps of urban surface material. Results are very encouraging: satellite and in-situ Q* sw are very close (RMSE ≈ 15W/m2; i.e., 2.7% mean relative difference).

International audience; After almost 9 years in orbit L-band satellite radiometry has demonstrated its impacts and values for a wide range of science and applications. However, so as to cover specific applications use of other sensors can prove very valuable. In particular use of altimetry, optical and thermal infrared measurements can offer new avenues. Many of them were tested with existing satellites at the time of SMOS launch, but with the Copernicus' Sentinel-3 mission's data now available, new applications and operational products can be envisioned.

The European Space Agency's (ESA) SMOS mission, in orbit since more than 8 years, carries a passive microwave interferometric radiometer measuring in L-Band and provides accurate global observations of emitted radiation originating from the Earth's surfaces since the atmosphere is almost transparent in this spectral range. In addition, over land the effect of vegetation on the measurements is smaller than for shorter wavelengths. The scientific objectives of the SMOS mission directly respond to the need for global observations of soil moisture and ocean salinity, two key variables used in predictive hydrological, oceanographic and atmospheric models. SMOS observations also provide information on the characterisation of ice and snow covered surfaces and the sea ice effect on ocean-atmosphere heat fluxes and dynamics, which affects large-scale processes of the Earth's climate system.

An algorithm using in situ measurements for training a neural network (NN) to retrieve soil moisture (SM) from SMOS observations is discussed. The in situ data are measurements of the SM content in the 0–5 cm depth layer from the SCAN, SNOTEL and USCRN networks. It is shown that this approach can be used to retrieve SM at continental scale in North America. The NN retrieval (NN inSitu ) is evaluated against in situ data not used during the training phase and against maps of the SMOS level 3 SM product and ECMWF SM models. NN inSitu SM values are closer to ECMWF values for wet areas. A method to use NNs as a tool to classify in situ sites representative of the remote sensing observations scale is briefly discussed.

International audience; In this study, we evaluated a new SMOS (Soil Moisture and Ocean Salinity) soil moisture (SM) product, developed by the collaboration of INRA (Institut National de la Recherche Agronomique) and CESBIO (Centre d'Etudes Spatiales de la BIOsphere), against the operational SMOS level 3 SM product (SMOSL3). This new product (hereinafter referred to as SMOS-INRA-CESBIO, i.e. SMOSIC in short) differs from SMOSL3 three ways: (i) the SMOSIC algorithm considers the pixel as homogeneous and does not take into account the heterogeneity of the pixel; (ii) uses a new calibration of the effective scattering albedo and soil roughness parameters; (iii) no time correlation is applied on the optical depth. The evaluation was done over North America using the (European Center for Medium range Weather Forecasting) ECMWF SM simulation as a reference, using data for 2011. A better performance of the SMOSIC SM product with respect to ECMWF was found: (i) SMOSIC had higher correlation coefficients (temporal dynamics) and lower unbiased RMSD (absolute values) values with ECMWF over most of the study area and (ii) the spatial patterns of the SMOSIC temporal mean SM maps were in a better agreement with ECMWF.

We introduced an approach to simulate and separate atmospheric contribution in ground-based thermal-infrared (TIR) camera measurements. Different from the traditional approach which uses the look-up table built from 1-D radiative transfer model (RTM), this approach directly simulates 3-D ray propagations and interactions in the heterogeneous urban environment by using the Discrete Anisotropic Radiative Transfer (DART) model. The atmospheric turbid cells that occupy every part of the urban scene are created using the vertical constituent distribution and the optical property profiles in the existing databases or from the actual meteorological measurements. The two components of atmospheric effects on the TIR at-sensor radiance are attenuated transmission and path thermal emission. Taking both into account, the at-surface radiance corresponding to the signal emitted only from the urban surface can be derived.

In this paper we present a study on the use of remote sensing data combined to the 3D modeling of radiative transfer (RT) and energy balance in urban canopies in the aim to improve our knowledge on anthropogenic heat fluxes in several European cities (London, Basel, Heraklion, and Toulouse). The approach is based on the forcing by the use of LandSAT8 data of a coupled radiative transfer model DART (Direct Anisotropic Radiative Transfer) (www.cesbio.upstlse.fr/dart) with an energy balance module. LandSAT8 visible remote sensing data is used to better parametrize the albedo of the urban canopy and thermal remote sensing data is used to enhance the anthropogenic component in the coupled model. This work is conducted in the frame of the H2020 project URBANFLUXES, which aim is to improve the efficiency of remote-sensing data usage for the determination of the anthropogenic heat fluxes in urban canopies [5].

The need of better accuracy for analyzing remote sensing (RS) data of complex Earth surfaces explains the increasing need of models that simulate RS data with physical approaches. Similarly, the study of Earth surfaces functioning requires physical models that simulate the 3D radiative budget (RB) of these surfaces. DART (Discrete Anisotropic Radiative Transfer is one of the most comprehensive physically based 3D models that model the Earth-atmosphere radiation interaction from visible to thermal infrared wavelengths. It simulates optical signals at the entrance of terrain / airborne / satellite imaging radiometers and laser scanners, as well as the 3D RB, of urban / natural landscapes for any experimental and instrumental configurations. Its licenses are free for research and teaching activities. Here, we present its major recent advances.

The recently launched H2020 project URBANFLUXES (URBan ANthrpogenic heat FLUX from Earth observation Satellites) investigates the potential of EO to retrieve anthropogenic heat flux, as a key component in the Urban Energy Budget (UEB). URBANFLUXES advances existing Earth Observation (EO) based methods for estimating spatial patterns of turbulent sensible and latent heat fluxes, as well as urban heat storage flux at city scale and local scale. Independent methods and models are engaged to evaluate the derived products and statistical analyses provide uncertainty measures. Optical, thermal and SAR data are exploited to improve the accuracy of the UEB components spatial distribution calculation. Synergistic use of different types and of various resolution EO data allows estimates in local and city scale. Ultimate goal of the URBANFLUXES is to develop a highly automated method for estimating UEB components to use with Copernicus Sentinel data, enabling its integration into applications and operational services.

International audience; This study investigated the use of physically based statistical regressions to retrieve a global and long term (e.g. 2003–2014) surface soil moisture (SSM) record based on a combination of passive microwave remote sensing observations from the Advanced Microwave Scanning Radiometer (AMSR-E; 2003-Sept. 2011) and the Soil Moisture and Ocean Salinity (SMOS; 2010–2014) sensors. Statistical regression methods based on bi-polarization (horizontal and vertical) brightness temperatures (Tb) observations obtained from AMSR-E. The coefficients of these regression equations were calibrated using SMOS level 3 SSM maps (SMOSL3) as a reference. This calibration process was carried out over the June 2010-Sept. 2011 period, over which both SMOS and AMSR-E observations coincide. Based on these calibrated coefficients global SSM maps could be computed from the AMSR-E Tb observations over the whole 2003–2011 period. In this study, the SSM maps were successfully evaluated against the SMOSL3 SSM products over the period of calibration (Jun. 2010-Sept. 2011). Correlations (R) and Root Mean Square Error (RMSE) were computed between the AMSR-E retrievals and the reference (SMOSL3) SSM products. The R (mostly > 0.75) and RMSE (mostly < 0.04 m3/m3) maps showed a good agreement between the retrieved and SMOSL3 SSM products particularly over Australia, central USA, central Asia, and the Sahel. In conclusion, the statistical regression method is capable of retrieving a coherent "SMOS-AMSR-E" SSM time series for the period 2003–2014.

In this communication we present an update on the RFI detection used in the SMOS processing chain and some elements on quantified impact of RFIs on level 2 soil moisture products. The level 2 soil moisture algorithms which included since the beginning a screening mechanism to reject contaminated brightness temperatures is now stricter. New approaches at the level 1 processors are also emerging and will be operational at their next release in 2014. Despite these strengthen procedures, RFIs are still impacting strongly SMOS observations and examples of quantified deterioration are given.