Search

The uncertainty of power system is intensified by the integration of large-scale renewable energy resources such as wind farm (WF). Considering the impact of system uncertainties, the probabilistic stability analysis methods have been used in the stability assessments of power system with the WF integration. However, in traditional probabilistic analysis methods, WF is normally considered as PQ bus or aggregated as one single-machine equivalent model regardless of wake effect, which might reduce the accuracy of probabilistic stability studies. In this article, a dynamic equivalent modeling method of WF for probabilistic stability assessments is proposed. The wake effect is considered in the modeling process and a practical four-machine clustering method is used in wind turbines clustering. Besides, the fisher discriminant analysis (FDA) is adopt to combine the similar WTs clustering results reasonably. Then, the WF is aggregated to a multi-machine equivalent model by capacity weighted method. Also, the established WF probabilistic model can be directly used in time-domain simulation based on Monte Carlo simulation and FDA. Finally, the efficiency of the proposed method is verified in an actual WF in China. [ABSTRACT FROM AUTHOR]

Nowadays, with the highly penetrated wind generations, the accurate wind farm (WF) model is required for power system stability analysis. Due to the complexity on detailed WF model, the aggregated model, with a reasonable reduction of the detailed model meanwhile retaining the required level of accuracy is essential to be developed. In this paper, an improved WF aggregated modeling method for large-scale power system stability studies is proposed. To overcome the limitations of the traditional methods, a geometric template matching based time series wind turbines clustering method is developed. Moreover, a multiobjective optimization algorithm, which fully considered the wind speed disturbance and system fault together, is designed to identify both the generator and control parameters. Additionally, to shrink the size of the identified parameters and increase the modeling accuracy, a sensitivity and correlation analysis based key parameters selection scheme is also adopted. To verify the effectiveness of the proposed method, dynamic responses of the proposed aggregated model are compared against the responses of the traditional equivalent model for various wind scenarios through an actual case. [ABSTRACT FROM AUTHOR]

When a short-circuit fault occurs in a distribution network, speed and reactive power consumption of an induction generator (IG) increase dramatically, which may cause system transient stability problems. This paper proposes an improved steady-state equivalent circuit method to determine transient stability of a distribution system or a micro-grid with multiple IGs. Interaction between IGs and distribution network during a fault is investigated. The relationship between network parameters and speeds of IGs is derived using the steady-state equivalent circuits of IGs. The critical speed and critical fault clearing time (CCT) for maintaining system stability are determined using the proposed technique. The factors, which affect transient stability of a multi-IG distribution system, are investigated. The correctness of the proposed method is verified using dynamic simulation. [ABSTRACT FROM AUTHOR]

Reactive power plays a significant role in power system operation. However, in reliability evaluation, attention has seldom been paid to reactive power. In conventional power system reliability evaluations, the fixed maximum and minimum values are applied as the reactive power limits of generators. Failures of reactive power sources are rarely considered. The detailed causes of network violations for a contingency are also seldom studied. Real power load shedding is usually used to alleviate network violations without considering the role of reactive power. There are no corresponding reliability indices defined to represent the reactive power shortage in the existing techniques. Reactive power shortage and the associated voltage violations due to the failures of reactive power sources are considered in this paper. New reliability indices are proposed to represent the effect of reactive power shortage on system reliability. The reliability indices due to reactive power shortages have been defined and are separated with those due to real power shortages. Reactive power limits determined by real power output of a generator using P-Q curve have been studied. A reactive power injection technique is proposed to determine possible reactive power shortage and location. The IEEE 30-bus system has been modified and analyzed to illustrate the proposed technique. The results provide system planners and operators very important information for real and reactive power management. [ABSTRACT FROM AUTHOR]

In practical microgrids, the inhomogeneous initial values are widely appeared due to soft-starting operation. If traditional model order reduction approaches are applied, the input-output maps error between the original system and reduced-order system is large. To address this problem, this paper proposes a reduced-order aggregate model based on balanced truncation approach to provide the preprocessing approach for the real-time simulation of large-scale converters with inhomogeneous initial conditions in DC microgrid. Firstly, the standard linear time-invariant model with inhomogeneous initial conditions is established through non-leader multiagents concept. To end this, it is convenient for scholars to build complex system modeling with switched topology. Furthermore, the full system is divided into two components, i.e., the unforced component with nontrivial initial conditions and forced component with null initial conditions. Moreover, this paper presents an aggregated approach that involves independent reducing component responses and combining reducing component responses. Based on this, the input-output maps error is reduced. Then, the approximated error estimate of the reduced-order aggregate model regarding large-scale converters in DC microgrid is first provided, which provides prior knowledge and theoretical basis for DC microgrid designers. Finally, the simulation results illustrate the accuracy of the proposed approach. [ABSTRACT FROM AUTHOR]

Due to global climate change, the effect of extreme weather on power systems has attracted extensive attention. In the prior-art grid resilience studies, the hurricanes or wildfires are mainly defended in terms of expected line damages, while they are prone to trigger short-circuit fault (SCF) evolved with dynamic influence in reality. In this paper, a fragile model is developed to evaluate the nodal SCF probability considering the insulation aging of equipment and extreme weather condition. Then, a response framework for extreme weather events is developed for a transmission system to defend the cascading impacts of expected SCFs. Specifically, switches are shifted to restrain the out-of-range short-circuit currents (SCCs) so that to ensure the SCFs can be removed by circuit breakers, generation rescheduling and load shedding are arranged to maintain the post-fault system transient stability. The above measures are optimized simultaneously by an integrated Mixed-Integer Nonlinear Programming (MINLP). Considering the error or uncertainty of weather event forecasts, a multi-state model is established to provide the most cost-effective grid resilience enhancement scheme, in which the expected urgent adaptions of the initial scheme subject to weather state transition is included in the overall cost. The proposed model and techniques are validated using the IEEE 39-bus New-England test system and realistic meteorological data. [ABSTRACT FROM AUTHOR]

The droop control is an advantageous approach for stand-alone supply systems consisting of multiple batteries, allowing among various inverters without intercommunication. The droop coefficients of batteries always vary with their state-of-charge (SoC) and charge/discharge mode, resulting in small-signal instability. Nevertheless, the existing impedance-based approaches can only assess the droop coefficients stability point, but not the stability region. Therefore, this article proposes a droop coefficients stability region analysis approach. First, the charge/discharge SoC-based droop controlled battery, the P&Q controlled distributed generator and the constant power load are separately discussed. Meanwhile, the state matrix and return-ratio matrix are established, respectively. Furthermore, the novel forbidden region criterion based on the return-ratio matrix is constructed, which reduces conservatism compared with norm-based impedance criteria and partial forbidden region criteria. Such a forbidden region criterion is first switched to the Hurwitz identification problem regarding the equivalent return-ratio matrix. Combined the state matrix and the equivalent return-ratio matrix, the generalized incidence matrix is constructed to simultaneously identify subsystem stability and interactive stability. Based on the generalized incidence matrix, an adaptive step search strategy is proposed to obtain the droop coefficients coordinated stability region. Finally, the simulation and experimental results illustrate the validity of the proposed method. [ABSTRACT FROM AUTHOR]

The high penetration of renewable energy sources always leads to the fluctuation of the droop coefficients which are designed in inverse proportion to their rated capacity, and power electronics devices are prone to static instability. Although the impedance-based approaches have been widely studied to deal with this problem, the stability-oriented droop coefficients region identification due to the fluctuation of renewable energy sources is not provided. Thus, this article proposes an impedance-based approach to assess the droop coefficients stability region in the power system consisting of numerous distributed generators (DGs). First, the modified phase margin and opposing argument (MPMOA) forbidden criterion is constituted to acquire the complementary space of the droop coefficients stability region. The MPMOA forbidden criterion is first transformed into the condition that the generalized return-ratio matrix is Hurwitz through mirror, rotation, and translation mapping. In comparison with the previous simplified stability criteria, the conservatism of the proposed criterion is reduced a lot. Thereafter, the droop coefficients stability region is directly calculated by the generalized return-ratio matrix and guardian map theory. Eventually, the simulation and experimental results are provided to validate the conservatism and effectiveness of the impedance-based stability region identification approach. Therein, the simulation results illustrate that the proposed droop coefficients stability operation criterion has lower conservatism than these of the previous simplified stability criteria. Furthermore, the simulation and experimental results illustrate that the proposed stability-oriented droop coefficients region identification approach can provide an effective parameter stability region. [ABSTRACT FROM AUTHOR]

This paper concentrates on the design, control, and implementation of an LCL-filter-based shunt active power filter (SAPF), which can effectively compensate for harmonic currents produced by nonlinear loads in a three-phase three-wire power system. With an LCL filter added at its output, the proposed SAPF offers superior switching harmonic suppression using much reduced passive filtering elements. Its output currents thus have high slew rate for tracking the targeted reference closely. Smaller inductance of the LCL filter also means smaller harmonic voltage drop across the passive output filter, which in turn minimizes the possibility of overmodulation, particularly for cases where high modulation index is desired. These advantages, together with overall system stability, are guaranteed only through proper consideration of critical design and control issues, like the selection of LCL parameters, interactions between resonance damping and harmonic compensation, bandwidth design of the closed-loop system, and active damping implementation with fewer current sensors. These described design concerns, together with their generalized design procedure, are applied to an analytical example, and eventually verified by both simulation and experimental results. [ABSTRACT FROM PUBLISHER]

The hybrid fuel cell/supercapacitor (FC/SC) system is a promising onboard power supply system for more electric aircraft (MEA), where system stability is a critical issue due to the high penetration of constant power loads (CPLs) in MEA. This article proposes a composite finite-time controller for decentralized power sharing and stabilization of the hybrid FC/SC system with CPLs. It consists of an integral droop (ID) + finite-time controller for the SC converter and a proportional droop (PD) + finite-time controller for the FC converter. First, the coordination of PD and ID achieves decentralized power sharing between FC and SC such that SC only compensates fast fluctuations and FC provides smooth power at the steady state. Then, a finite-time observer is designed to provide feedforward compensation for the disturbances and enables accurate tracking with fast dynamics. Finally, a composite finite-time controller is constructed following a nonrecursive synthesis procedure with a rigorous large signal stability analysis. The proposed controller guarantees finite-time convergence even under large signal variations and can be easily implemented with a practical gain tuning procedure. Simulations and experiments are conducted to verify the proposed technique. [ABSTRACT FROM AUTHOR]

The multilevel boost converter (MBC) has been widely adopted in the dc microgrid systems due to its high voltage gain and simple structure. In recent years, the power electronic loads, which usually behave as constant power loads (CPLs), are penetrating in microgrids. The incremental negative impedance of CPLs degrades the stability of microgrid systems. To ensure effective power flow and guarantee system stability, eliminating the undesired effects of CPLs is a necessity. In this article, a novel assorted nonlinear stabilizer, which is integrated with an extended nonlinear disturbance observer (NDO) and an adaptive backstepping controller, is proposed for stabilizing the MBC-fed microgrid system with CPLs. First, the reduced-order MBC model is transformed into the Brunovsky's canonical form using the exact feedback linearization technique. Second, owing to the NDO, fast system dynamic responses are achieved. Using the estimations of NDO, an adaptive backstepping controller is developed to strictly guarantee the microgrid bus voltage stability in the sense of a large signal. Simulation and experiment results are presented to verify the effectiveness and feasibility of the proposed stabilizer. [ABSTRACT FROM AUTHOR]

Different from single-bus dc microgrids (MGs), a multibus MG normally bridge multiple dc buses via a complex line impedance network. This intricate configuration together with tickling constant power loads may cause severe stability issues. For system stability improvement, conventional ways include designing small-signal stabilizers in a decentralized way and constructing large-signal stabilizers by solving Lyapunov equation in a central controller. Note that centralized methods may be vulnerable to single point of failures, while decentralized patterns are commended to reinforce MG reliability and scalability. To implement large-signal stabilization in decentralized mechanisms, which has rarely been investigated in the existing literature, a novel uniform nonsmooth control scheme (UNCS) is proposed, in this article. UNCS has the following fourfold advantages. First, UNCS helps to express commonly used dc/dc converters, boost, buck, and buck–boost, into a uniform model. The model substantially facilitates a uniform stabilizer design that accommodates the preceding three converters despite their differences in topology. Second, UNCS assigns each converter based distributed generator (DG) with a composite large-signal stabilizer comprising a nonsmooth observer and a nonsmooth controller. The controller neutralizes the disturbances estimated by the observer, and it also rigorously stabilizes the internal states in DG uniform model. Third, the stabilizer also provides an additional control degree of freedom, a finetuning factor, to refine DG dynamic responses to meet high requirements for voltage and power qualities. Fourth, when numerous DGs with the proposed stabilizer congregate to build a multibus MG, the overall system large-signal stabilization is autonomously attained without communication links, which is mathematically justified by Lyapunov stability analyses. As such, DGs are allowed to randomly plug in/out without worrying about impairing system level stability. Simulations help to properly select relevant key parameters. Experiments show that UNCS outperforms the standardly designed PI controls, and it will stabilize the multibus MG in a large operation range. [ABSTRACT FROM AUTHOR]

A virtual synchronous generator (VSG) control based on adaptive virtual inertia is proposed to improve dynamic frequency regulation of microgrid. When the system frequency deviates from the nominal steady-state value, the adaptive inertia control can exhibit a large inertia to slow the dynamic process and, thus, improve frequency nadir. And when the system frequency starts to return, a small inertia is shaped to accelerate system dynamics with a quick transient process. As a result, this flexible inertia property combines the merits of large inertia and small inertia, which contributes to the improvement of dynamic frequency response. The stability of the proposed algorithm is proved by Lyapunov stability theory, and the guidelines on the key control parameters are provided. Finally, both hardware-in-the-loop and experimental results demonstrate the effectiveness of the proposed control algorithm. [ABSTRACT FROM AUTHOR]

Photovoltaic (PV) generators have continuously increased in recent years, whose power is usually controlled through the perturbation and observation (P&O) method. In essence, the P&O method is nonlinear and discontinuous. Hence, the conventional small-signal stability analysis is not suitable anymore when the influence of the P&O-based power control is considered. Focusing on this problem, this paper adopts the nonlinear describing function (DF) method to conduct the accurate stability analysis of PV generators with consideration of P&O-based power control. The detailed procedures about the DF method are introduced, and then the related influence factors like perturbation size, filters, and so on are analyzed quantitatively. Furthermore, the comparison with the conventional stability analysis methods is made, which suggests that the DF method can effectively enhance the accuracy of the stability analysis. All the conclusions are verified by the real-time hardware-in-loop tests. [ABSTRACT FROM AUTHOR]

Based on the decentralized sliding mode control, a load frequency controller is designed in this paper for multi-area interconnected power systems with matching and unmatched uncertainties. The proportional and integral switching surface is constructed for each area to improve system dynamic performance in reaching intervals. The robust controller is proposed by the reaching law method to assure that frequency fluctuation converges to zero after a load and operation point variation. A three-area interconnected power system is studied to illustrate the effectiveness of the proposed decentralized sliding mode control scheme. [ABSTRACT FROM PUBLISHER]