Search

The accurate determination of the steering vector of a sensor array that corresponds to a desired signal is often hindered by uncertainties due to array imperfections, such as the presence of a direction-of-arrival (DOA) estimation error, mutual coupling, array sensor gain/phase uncertainties, and senor position perturbations. Consequently, the performance of conventional beamforming algorithms that use the nominal steering vector may be significantly degraded. A new method for recursively correcting possible deterministic errors in the estimated steering vector is proposed here. It employs the subspace principle and estimates the desired steering vector by using a convex optimization approach. We show that the solution can be obtained in closed form by using the Lagrange multiplier method. As the proposed method is based on an extended version of the conventional orthonormal PAST (OPAST) algorithm, it has low implementation complexity, and moving sources can be handled. In addition, a robust beamformer with a new error bound that uses the proposed steering vector estimate is derived by optimizing the worst case performance of the array after taking the uncertainties of the array covariance matrix into account. This gives a diagonally loaded Capon beamformer, where the loading level is related to the bound of the uncertainty in the array covariance matrix. Numerical results show that the proposed algorithm performs well, especially at high signal-to-noise ratio (SNR) and in the presence of deterministic sensor uncertainties. [ABSTRACT FROM PUBLISHER]

This paper proposes a Kalman filter-based attitude (i.e., roll and pitch) estimation algorithm using an inertial sensor composed of a triaxial accelerometer and a triaxial gyroscope. In particular, the proposed algorithm has been developed for accurate attitude estimation during dynamic conditions, in which external acceleration is present. Although external acceleration is the main source of the attitude estimation error and despite the need for its accurate estimation in many applications, this problem that can be critical for the attitude estimation has not been addressed explicitly in the literature. Accordingly, this paper addresses the combined estimation problem of the attitude and external acceleration. Experimental tests were conducted to verify the performance of the proposed algorithm in various dynamic condition settings and to provide further insight into the variations in the estimation accuracy. Furthermore, two different approaches for dealing with the estimation problem during dynamic conditions were compared, i.e., threshold-based switching approach versus acceleration model-based approach. Based on an external acceleration model, the proposed algorithm was capable of estimating accurate attitudes and external accelerations for short accelerated periods, showing its high effectiveness during short-term fast dynamic conditions. Contrariwise, when the testing condition involved prolonged high external accelerations, the proposed algorithm exhibited gradually increasing errors. However, as soon as the condition returned to static or quasi-static conditions, the algorithm was able to stabilize the estimation error, regaining its high estimation accuracy. [ABSTRACT FROM AUTHOR]

This paper considers linear minimum mean-square-error (MMSE) transceiver design problems for downlink multiuser multiple-input multiple-output (MIMO) systems where imperfect channel state information is available at the base station (BS) and mobile stations (MSs). We examine robust sum mean-square-error (MSE) minimization problems. The problems are examined for the generalized scenario where the power constraint is per BS, per BS antenna, per user or per symbol, and the noise vector of each MS is a zero-mean circularly symmetric complex Gaussian random variable with arbitrary covariance matrix. For each of these problems, we propose a novel duality based iterative solution. Each of these problems is solved as follows. First, we establish a novel sum average mean-square-error (AMSE) duality. Second, we formulate the power allocation part of the problem in the downlink channel as a Geometric Program (GP). Third, using the duality result and the solution of GP, we utilize alternating optimization technique to solve the original downlink problem. To solve robust sum MSE minimization constrained with per BS antenna and per BS power problems, we have established novel downlink-uplink duality. On the other hand, to solve robust sum MSE minimization constrained with per user and per symbol power problems, we have established novel downlink-interference duality. For the total BS power constrained robust sum MSE minimization problem, the current duality is established by modifying the constraint function of the dual uplink channel problem. And, for the robust sum MSE minimization with per BS antenna and per user (symbol) power constraint problems, our duality are established by formulating the noise covariance matrices of the uplink and interference channels as fixed point functions, respectively. We also show that our sum AMSE duality are able to solve other sum MSE-based robust design problems. Computer simulations verify the robustness of the proposed robust designs compared to the nonrobust/naive designs. [ABSTRACT FROM PUBLISHER]

This paper considers the problem of adaptive array processing for interference canceling to drive very deep nulls in difficult signal environments. In many practical scenarios, the achievable null depth is limited by covariance matrix estimation error leading to poor identification of the interference subspace. We address the particularly troublesome cases of low interference-to-noise ratio (INR), relatively rapid interference motion, and correlated noise across the receiving array. A polynomial-based model is incorporated in the proposed algorithm to track changes in the array covariance matrix over time, mitigate interference subspace estimation errors, and improve canceler performance. The application of phased array feeds for radio astronomical telescopes is used to illustrate the problem and proposed solution. Here even weak residual interference after cancelation may obscure a signal of interest, so very deep beampattern nulls are required. Performance for conventional subspace projection (SP) is compared with polynomial-augmented SP using simulated and real experimental data, showing null-depth improvement of 6 to 30 dB. [ABSTRACT FROM PUBLISHER]