Search

Hybrid dc circuit breakers (HCBs) are recognized as suitable devices for protecting high-voltage direct-current (HVDC) systems, along with other dc circuit breakers (DCCB). However, compared to mechanical circuit breakers, HCBs exhibit higher conduction losses. Such losses are inevitable under no-fault conditions as current may flow through some of the semiconductor switches. An integrated circuit breaker (ICB) minimizing these losses is presented in this paper, and this is achieved by replacing semiconductor switches by mechanical components in the current path. For completeness, the topology design, operating sequence and a mathematical analysis for component sizing of the device are provided. In addition, an estimation of the conduction losses is quantified. It is estimated that the power losses of an ICB are 2 to 30% of an HCB only. The ICB has been implemented in PSCAD/EMTDC to demonstrate its effectiveness for isolating dc faults, with simulations conducted on a three-terminal HVDC grid. [ABSTRACT FROM AUTHOR]

This article presented a new hybrid circuit breaker solution for using in dc microgrids. The proposed solution can offer a high-reliability protection feature for the dc microgrid with low conduction loss, bidirectional current flow, and galvanic isolation function. In the design, it is combined with a group of mechanical switches and semiconductors, where the mechanical switches handle the current conduction during normal operation and the semiconductors handle the breaker response during transient operation. The design fully utilizes the advantage of both types of switches and maximizes the performance and life time of the system. Throughout the design, it maintains only one mechanical switch in series with each power line; thereby, the high conductivity of the circuit breaker is maintained. At the same time, through the hybrid design, the electrical stress applied to the mechanical switch is eliminated. Thus, an effective and high-reliability solution is provided for the design of dc circuit breakers. The operation principle is explained in detail and the design guideline is provided. A 150/380 V and 15 A circuit breaker is successfully implemented, and the performance is experimentally verified, which shows good agreement with the theoretical findings. [ABSTRACT FROM AUTHOR]

Hybrid dc circuit breaker (HCB) is currently the most promising dc circuit breaker. However, since it requires hundreds of semiconductor switches to withstand high transient interruption voltage, the implementation cost is high. Besides, in the multiterminal dc grid, three or more HCBs may be required at a dc bus, which worsens the disadvantages of HCBs in economy and volume. In order to solve this problem, this article designs a diode-bridge multiport HCB (DB-MPB) with its control procedures. By integrating the n HCBs at the dc bus to a single n-port HCB, the number of semiconductor switches and the footprint can be reduced, while the good current interruption performance can be still maintained. Besides, for the possibility of ultrafast disconnector (UFD) failure, the proposed DB-MPB has the function of UFD failure protection. The effectiveness of the designed DB-MPB under different scenarios is verified by simulations and experimental tests. In addition, the performance comparisons in economy and functionality of the proposed DB-MPB with existed solutions are presented to highlight the advantages of the proposed solution. [ABSTRACT FROM AUTHOR]