Search

This paper introduces realizations of a reconfigurable finite-impulse-response (FIR) filter for simultaneous equalization and lowpass filtering. The proposed structures employ properties of both a variable bandwidth (VBW) filter and a variable equalizer (VE) with an adjustable coefficient using the Farrow structure, therefore they consist of weighted combinations of fixed subfilters. Design procedures using minimax optimization technique are provided. The paper includes a design example and complexity comparisons between the proposed structures of the reconfigurable lowpass equalizer (RLPE) and a common approach of using a regular FIR equalization filter requiring online redesign.

The knowledge of channel covariance matrices is of paramount importance to the estimation of instantaneous channels and the design of beamforming vectors in multi-antenna systems. In practice, an abrupt change in channel covariance matrices may occur due to the change in the environment and the user location. Although several works have proposed efficient algorithms to estimate the channel covariance matrices after any change occurs, how to detect such a change accurately and quickly is still an open problem in the literature. In this paper, we focus on channel covariance change detection between a multiantenna base station (BS) and a single-antenna user equipment (UE). To provide theoretical performance limit, we first propose a genie-aided change detector based on the log-likelihood ratio (LLR) test assuming the channel covariance matrix after change is known, and characterize the corresponding missed detection and false alarm probabilities. Then, this paper considers the practical case where the channel covariance matrix after change is unknown. The maximum likelihood (ML) estimation technique is used to predict the covariance matrix based on the received pilot signals over a certain number of coherence blocks, building upon which the LLR-based change detector is employed. Numerical results show that our proposed scheme can detect the change with low error probability even when the number of channel samples is small such that the estimation of the covariance matrix is not that accurate. This result verifies the possibility to detect the channel covariance change both accurately and quickly in practice.

Backscatter communication (BSC) is a promising solution for Internet-of-Things (IoT) connections due to its lowcomplexity, low-cost, and energy-efficient solution for sensors. There are several network infrastructure setups that can be used for BSC with IoT nodes/passive devices. One of them is a bistatic setup where there is a need for high dynamic range and high-resolution analog-to-digital converters at the reader side. In this paper, we investigate a bistatic BSC setup with multiple antennas. We propose a novel algorithm to suppress direct link interference between the carrier emitter (CE) and the reader using beamforming into the nullspace of the CEreader direct link to decrease the dynamic range of the system and increase the detection performance of the backscatter device (BSD). Further, we derive a Neyman-Pearson (NP) test and an exact closed-form expression for its performance in the detection of the BSD. Finally, simulation results show that the dynamic range of the system is significantly decreased and the detection performance of the BSD is increased by the proposed algorithm compared to a system not using beamforming in the CE, which could then be used in a host of different practical fields such as agriculture, transportation, factories, hospitals, smart cities, and smart homes., Funding Agencies|European Union [101013425]; ELLIIT; KAW foundation

In this paper, we consider privacy aspects of wireless federated learning (FL) with Over-the-Air (OtA) transmission of gradient updates from multiple users/agents to an edge server. OtA FL enables the users to transmit their updates simultaneously with linear processing techniques, which improves resource efficiency. However, this setting is vulnerable to privacy leakage since an adversary node can hear directly the uncoded message. Traditional perturbation-based methods provide privacy protection while sacrificing the training accuracy due to the reduced signal-to-noise ratio. In this work, we aim at minimizing privacy leakage to the adversary and the degradation of model accuracy at the edge server at the same time. More explicitly, spatially correlated perturbations are added to the gradient vectors at the users before transmission. Using the zero-sum property of the correlated perturbations, the side effect of the added perturbation on the aggregated gradients at the edge server can be minimized In the meanwhile, the added perturbation will not be canceled out at the adversary, which prevents privacy leakage. Theoretical analysis of the perturbation covariance matrix, differential privacy, and model convergence is provided, based on which an optimization problem is formulated to jointly design the covariance matrix and the power scaling factor to balance between privacy protection and convergence performance. Simulation results validate the correlated perturbation approach can provide strong defense ability while guaranteeing high learning accuracy., Funding Agencies|Security Link; ELLIIT; KAW foundation

Base stations in 5G and beyond use advanced antenna systems (AASs), where multiple passive antenna elements and radio units are integrated into a single box. A critical bottleneck of such a system is the digital fronthaul between the AAS and baseband unit (BBU), which has limited capacity. In this paper, we study an AAS used for precoded downlink transmission over a multi-user multiple-input multiple-output (MU-MIMO) channel. First, we present the baseline quantization-unaware precoding scheme created when a precoder is computed at the BBU and then quantized to be sent over the fronthaul. We propose a new precoding design that is aware of the fronthaul quantization. We formulate an optimization problem to minimize the mean squared error at the receiver side. We rewrite the problem to utilize mixed-integer programming to solve it. The numerical results manifest that our proposed precoding greatly outperforms quantization-unaware precoding in terms of sum rate., Funding Agencies|Knut and Alice Wallenberg Foundation

Previous works on cell-free massive MIMO mostly consider physical-layer and fronthaul transport aspects. How to deploy cell-free massive MIMO functionality in a practical wireless system is an open problem. This paper proposes a new cell-free architecture that can be implemented on top of a virtualized cloud radio access network (V-CRAN). We aim to minimize the end-to-end power consumption by jointly considering the radio, optical fronthaul, virtualized cloud processing resources, and spectral efficiency requirements of the user equipments. The considered optimization problem is cast in a mixed binary second-order cone programming form and, thus, the global optimum can be found using a branch-and-bound algorithm. The optimal power-efficient solution of our proposed cell-free system is compared with conventional small-cell implemented using V-CRAN, to determine the benefits of cell-free networking. The numerical results demonstrate that cell-free massive MIMO increases the maximum rate substantially, which can be provided with almost the same energy per bit. We show that it is more power-efficient to activate cell-free massive MIMO already at low spectral efficiencies (above 1 bit/s/Hz)., Funding Agencies|CELTIC -NEXT project AI4Green; Vinnova, Swedish Innovation Agency

An Intelligent Reflecting Surface (IRS) is an emerging technology for improving the data rate over wireless channels by controlling the underlying channel. In this paper, we describe a novel solution for IRS configuration to maximize the data rate over wideband channels. The optimization is obtained by online training of a deep generative neural network. Inspired by related works in image processing, this network is randomly initialized and acts as a regularization term for the optimization process since the structure of the generator is sufficient to capture a great deal of IRS statistics prior to any learning. In contrast to recent deep learning techniques for IRS configuration, the proposed technique does not require an offline training stage and can adapt quickly to any environment. Compared to the previous state-of-the-art algorithm, the proposed method is significantly faster and obtains IRS configurations that achieve higher data transmission rates.

How to manage the interference introduced by the enormous wireless devices is a crucial issue to address in the prospective sixth-generation (6G) communications. The treating interference as noise (TIN) optimality conditions are commonly used for interference management and thus attract significant interest in existing wireless systems. Cell-free massive multiple-input multiple-output (CF mMIMO) is a promising technology in 6G that exhibits high system throughput and excellent interference management by exploiting a large number of access points (APs) to serve the users collaboratively. In this paper, we take the first step on studying TIN in CF mMIMO systems from a stochastic geometry perspective by investigating the probability that the TIN conditions hold with spatially distributed network nodes. We propose a novel analytical framework for TIN in a CF mMIMO system with both Binomial Point Process (BPP) and Poisson Point Process (PPP) approximations. We derive the probability that the TIN conditions hold in close form using the PPP approximation. Numerical results validate our derived expressions and illustrate the impact of various system parameters on the probability that the TIN conditions hold., Funding Agencies|Fundamental Research Funds for the Central Universities [2021YJS001]; National Key R&D Program of China [2020YFB1807201]; National Natural Science Foundation of China [61971027, 61961130391]; Beijing Natural Science Foundation [L202013]; Natural Science Foundation of Jiangsu Province [BK20212002]; Royal Society Newton Advanced Fellowship [NA191006]; Frontiers Science Center for Smart Highspeed Railway System; Center for Industrial Information Technology (CENIIT); Excellence Center at Linkoping-Lund in Information Technology (ELLIIT)

Wireless power transfer (WPT) is an alternative technology to conventional batteries for powering Internet of things (IoT) devices. WPT is especially beneficial in situations when battery replacement is infeasible or expensive. It can also reduce battery-related e-waste. In this paper, we analyze the limits of adopting WPT technology for remote powering of IoT devices. We assume that an IoT device periodically harvests energy from a base station (BS) and transmits a data packet related to the sensor measurement under shadow fading channel conditions. Our goal is to characterize the epsilon-coverage range, where epsilon is the probability of the coverage. Our analysis shows a tradeoff between the coverage range and the rate of sensor measurements, where the maximal epsilon-coverage range is achieved as the sensor measurement rate approaches zero. We demonstrate that the weighted sum of the sleep power consumption and the harvesting sensitivity power of an IoT device limits the maximal e-coverage range. Beyond that range, the IoT device cannot harvest enough energy to operate. The desired rate of the sensor measurements also significantly impacts the epsilon-coverage range. Our results suggest that for an IoT device designed using current technology, the maximal 0.95-coverage range is in the order of 120 m. When high measurement rates are required, the coverage range drops to 50-100 m. Compared to battery-powered IoT devices, WPT is well-suited for medium-range applications plus when battery replacement is costly.

In this paper, we examine the energy consumption of a user equipment (UE) when it transmits a finite-sized data packet. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS) that can be utilized to improve the channel conditions, if additional pilot signals are transmitted to configure the RIS. We derive a formula for the energy consumption taking both the pilot and data transmission powers into account. By dividing the RIS into subarrays consisting of multiple RIS elements using the same reflection coefficient, the pilot overhead can be tuned to minimize the energy consumption while maintaining parts of the aperture gain. Our analytical results show that there exists an energy-minimizing subarray size. For small data blocks and when the channel conditions between the BS and UE are favorable compared to the path to the RIS, the energy consumption is minimized using large subarrays. When the channel conditions to the RIS are better and the data blocks are large, it is preferable to use fewer elements per subarray and potentially configure the elements individually., Funding Agencies|Swedish Foundation for Strategic Research [FFL18-0277]

RadioWeaves, in which distributed antennas with integrated radio and compute resources serve a large number of users, is envisioned to provide high data rates in next-generation wireless systems. In this paper, we develop a physical layer abstraction model to evaluate the performance of different RadioWeaves deployment scenarios. This model helps speed up system-level simulators of the RadioWeaves and is made up of two blocks. The first block generates a vector of signalto-interference-plus-noise ratios (SINRs) corresponding to each coherence block, and the second block predicts the packet error rate corresponding to the SINRs generated. The vector of SINRs generated depends on different parameters such as the number of users, user locations, antenna configurations, and precoders. We have also considered different antenna gain patterns, such as omni-directional and directional microstrip patch antennas. Our model exploits the benefits of exponential effective SINR mapping (EESM). We study the robustness and accuracy of the EESM for RadioWeaves., Funding Agencies|European Union [101013425]

The data traffic in wireless networks is steadily growing. The long-term trend follows Coopers law, where the traffic is doubled every Two-and-a-half year, and it will likely continue for decades to come. The data transmission is tightly connected with the energy consumption in the power amplifiers, transceiver hardware, and baseband processing. The relation is captured by the energy efficiency metric, measured in bit/Joule, which describes how much energy is consumed per correctly received information hit. While the data rate is fundamentally limited by the channel capacity, there is currently no clear understanding of how energy-efficient a communication system can become. Current research papers typically present values on the order of 10Mbit/Joule, while previous network generations seem to operate at energy efficiencies on the order of 10 kbit/Joule. Is this roughly as energy-efficient future systems (5G and beyond) can become, or are we still far from the physical limits? These questions are answered in this paper. We analyze a different cases representing potential future deployment and hardware characteristics., Funding Agencies|ELLIIT; Swedish Foundation for Strategic Research (SSF); Swedish Research Council (VR)

Reconfigurable intelligent surfaces (RISs) have recently received widespread attention in the field of wireless communication. An RIS can be controlled to reflect incident waves from the transmitter towards the receiver; a feature that is believed to fundamentally contribute to beyond SG wireless technology. The typical RIS consists of entirely passive elements, which requires the high-dimensional channel estimation to be done elsewhere. Therefore, in this paper, we present a semi-passive large-scale RIS architecture equipped with only a small fraction of simplified receiver units with only 1-bit quantization. Based on this architecture, we first propose an alternating direction method of multipliers (ADMM)-based approach to recover the training signals at the passive RIS elements, We then obtain the global channel by combining a channel sparsification step with the generalized approximate message passing (GAMP) algorithm. Our proposed scheme exploits both the sparsity and low-rankness properties of the channel in the joint spatial-frequency domain of a wideband mmWave multiple-input-multiple-output (MIMO) communication system. Simulation results show that the proposed algorithm can significantly reduce the pilot signaling needed for accurate channel estimation and outperform previous methods, even with fewer receiver units.

In this paper, we consider a cellular-based Internet of things (IoT) network consisting of IoT devices that can communicate directly with each other in a device-to-device (D2D) fashion as well as send real-time status updates about some underlying physical processes observed by them. We assume that such real-time applications are supported by cellular networks where cellular base stations (BSs) collect status updates over time from a subset of the IoT devices in their vicinity. We characterize two performance metrics: i) the network throughput which quantifies the performance of D2D communications, and ii) the Age of Information which quantifies the performance of the real-time IoT-enabled applications. Concrete analytical results are derived using stochastic geometry by modeling the locations of IoT devices as a bipolar Poisson Point Process (PPP) and that of the BSs as another Independent PPP. Our results provide useful design guidelines on the efficient deployment of future IoT networks that will jointly support D2D communications and several cellular network-enabled real-time applications., Funding Agencies|U.S. NSF [CPS-1739642]

Reconfigurable intelligent surfaces (RISs) have attracted great attention as a potential beyond SG technology. These surfaces consist of many passive elements of metamaterials whose impedance can be controllable to change the phase, amplitude, or other characteristics of wireless signals impinging on them. Channel estimation is a critical task when it comes to the control of a large RIS when having a channel with a large number of multipath components. In this paper, we propose a novel channel estimation scheme that exploits spatial correlation characteristics at both the massive multiple-input multiple-output (MIMO) base station and the planar RISs, and other statistical characteristics of multi-specular fading in a mobile environment. Moreover, a novel heuristic for phase-shift selection at the RISs is developed, inspired by signal processing methods that are effective in conventional massive MIMO. Simulation results demonstrate that the proposed uplink RIS-aided framework improves the spectral efficiency of the cell-edge mobile users substantially in comparison to a conventional single-cell massive MIMO system., Funding Agencies|Swedish Foundation for Strategic Research [FFL18-0277]

Classification between different activities in an indoor environment using wireless signals is an emerging technology for various applications, including intrusion detection, patient care, and smart home. Researchers have shown different methods to classify activities and their potential benefits by utilizing WiFi signals. In this paper, we analyze classification of moving objects by employing machine learning on real data from a massive multi-input-multi-output (MIMO) system in an indoor environment. We conduct measurements for different activities in both line-of-sight and non line-of-sight scenarios with a massive MIMO testbed operating at 3.7 GHz. We propose algorithms to exploit amplitude and phase-based features classification task. For the considered setup, we benchmark the classification performance and show that we can achieve up to 98% accuracy using real massive MIMO data, even with a small number of experiments. Furthermore, we demonstrate the gain in performance results with a massive MIMO system as compared with that of a limited number of antennas such as in WiFi devices., Funding Agencies|ELLIIT, Security-Link; Ericsson ABEricsson

Deep learning (DL) is becoming popular as a new tool for many applications in wireless communication systems. However, for many classification tasks (e.g., modulation classification) it has been shown that DL-based wireless systems are susceptible to adversarial examples; adversarial examples are well-crafted malicious inputs to the neural network (NN) with the objective to cause erroneous outputs. In this paper, we extend this to regression problems and show that adversarial attacks can break DL-based power allocation in the downlink of a massive multiple-input-multiple-output (maMIMO) network. Specifically, we extend the fast gradient sign method (FGSM), momentum iterative FGSM, and projected gradient descent adversarial attacks in the context of power allocation in a maMIMO system. We benchmark the performance of these attacks and show that with a small perturbation in the input of the NN, the white-box attacks can result in infeasible solutions up to 86%. Furthermore, we investigate the performance of black-box attacks. All the evaluations conducted in this work are based on an open dataset and NN models, which are publicly available.

Caching popular contents at a large number of access points and edge-clouds is a promising solution to alleviate the increasing backhaul congestion in beyond fifth-generation (B5G) networks. By integrating with cell-free massive multiple-input multiple-output (CF mMIMO), wireless caching can harness their combined virtues, i.e., almost uniform service quality, strong macro-diversity, and reduction of the data traffic from the core network. In this paper, we consider an offline cache-aided scenario with two caching strategies to minimize the total energy consumption (TEC), which are evaluated from the cache hit probability (CHP). The TEC minimization is showed to be NP-complete and, hence, dealt with a proposed greedy algorithm. An adaptive power control policy is proposed to reduce the TEC. We compare CF mMIMO with small cells in terms of the successful content delivery probability (SCDP) and TEC, respectively. The numerical results show that CF mMIMO can offer a much more uniform service, significantly higher SCDP, and lower average TEC when compared to than SC.

Massive MIMO (Multiple Input Multiple Output) has demonstrated as a potential candidate for 5G-and-beyond wireless networks. Instead of using Gaussian signals as most of the previous works, this paper makes a novel contribution by investigating the transmission quality of image data by utilizing the Massive MIMO technology. We first construct a framework to decode the image signal from the noisy received data in the uplink Massive MIMO transmission by utilizing the alternating direction method of multipliers (ADMM) approach. Then, a low-pass filter is exploited to enhance the efficiency of the remaining noise and artifacts reduction in the recovered image. Numerical results demonstrate the necessity of a post-filtering process in enhancing the quality of image recovery., Funding Agencies|Vietnam National Foundation for Science and Technology Development (NAFOSTED)National Foundation for Science & Technology Development (NAFOSTED) [102.01-2019.07]

Cognitive radio (CR) is an effective solution to increase the spectral efficiency (SE) of wireless communications by allowing the secondary users (SUs) to share the spectrum with primary users (PUs). On the other hand, intelligent reflecting surface (IRS) is a promising approach to enhance the energy efficiency (EE) of wireless communication systems through passively reconfiguring the channel environments. In this paper, we propose an IRS enhanced downlink multiple-input single-output (MISO) CR systems to improve both SE and EE, where a single SU coexists with a primary network with multiple primary user receivers (PU-RXs). Specifically, for the MISO-CR system, we maximize the achievable rate of SU subject to a total power constraint on an SU transmitter (SU-TX) and an interference temperature (IT) constraint on PU-RXs, by jointly optimizing the beamforming vector at SU-TX and the phase shifts at the IRS. Furthermore, both perfect channel state information (CSI) and imperfect CSI are considered in the optimization. Numerical results demonstrate that the IRS can significantly improve the achievable rate of SU-RX under both the perfect and imperfect CSI conditions., Funding Agencies|National Natural Science Foundation of ChinaNational Natural Science Foundation of China (NSFC) [61631005, U1801261]; National Key RD Program of China [2018YFB1801105]; 111 ProjectMinistry of Education, China - 111 Project [B20064]; NRF - Korea government (MSIT) [2018R1A4A1023826]; Central Universities Funding [ZYGX2019Z022]