Search

In order to measure the actual synthesis and degradation rates (SR, DR) for rRNA in yeast, we developed a method based on the pulse labeling and quantification of newly synthesized large rRNA molecules by a known mass of cells. The SR is calculated as the ratio of new rRNA molecules (synthesized after a short [5,6- 3 H]-uracil pulse) to total rRNA (a proxy of cell mass), calculated by northern blotting after hybridization with a 32 P-labeled rRNA probe. Then to measure the DR we perform a chase of the existing 3 H-labeled rRNA for several hours during yeast culture growth. We have used this method in control experiments where the yeast cell volume varies as a way to check if the SR and DR are constant with the cell volume., (© 2025. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Microfluidics enables the creation of monodisperse, micron-scale aqueous droplets, or other compartments. These droplets serve as picolitre-volume reaction chambers which can be utilized for various chemical assays or reactions. Here we describe the use of a microfluidic droplet generator to encapsulate single cells within hollow hydrogel microparticles called PicoShells. The PicoShell fabrication utilizes a mild pH-based crosslinking modality of an aqueous two-phase prepolymer system, avoiding the cell death and unwanted genomic modifications that accompany more typical, ultraviolet light crosslinking techniques. The cells are grown inside of these PicoShells into monoclonal colonies in any number of environments, including scaled production environments using commercially relevant incubation methods. Colonies can be phenotypically analyzed and/or sorted using standard, high-throughput laboratory techniques, namely, fluorescence-activated cell sorting (FACS). Cell viability is maintained throughout particle fabrication and analysis, and cells exhibiting a desired phenotype can be selected and released for re-culturing and downstream analysis. Large-scale cytometry runs are of particular use when measuring the protein expression of heterogeneous cells in response to environmental stimuli, notably to identify targets early in the drug discovery process. The sorted cells can also be encapsulated multiple times to direct the evolution of a cell line to a desired phenotype., (© 2023. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Chromatin immunoprecipitation followed by mass spectrometry (ChIP-MS) is a powerful method to identify protein interactions, and has long been used to gain insights into regulatory networks in relevant fungal species as well as many other organisms. In this chapter, we discuss a similar technique called ChIP-SICAP (chromatin immunoprecipitation with selective isolation of chromatin-associated proteins) that overcomes many of the traditional limitations of ChIP-MS, and describe a protocol that allows ChIP-SICAP to be applied to Candida albicans and other yeasts. Notably, the technique design permits stringent washing to remove contaminating proteins and antibodies before subsequent mass spectrometry processing, allows for genome-wide mapping of the bait protein by ChIP-seq after ChIP-SICAP from the same sample through a DNA recovery process, and specifically purifies and identifies proteins associating with chromatin. In the future, ChIP-SICAP will provide the yeast genomics research community an additional method to explore the complex dynamics of the gene-regulatory networks modulating morphology, metabolism and response to stress., (© 2022. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Evolutionary engineering of microbes provides a powerful tool for untargeted optimization of (engineered) cell factories and identification of genetic targets for further research. Directed evolution is an intrinsically time-intensive effort, and automated methods can significantly reduce manual labor. Here, design considerations for various evolutionary engineering methods are described, and generic workflows for batch-, chemostat-, and accelerostat-based evolution in automated bioreactors are provided. These methods can be used to evolve yeast cultures for >1000 generations and are designed to require minimal manual intervention., (© 2022. Springer Science+Business Media, LLC, part of Springer Nature.)

In eukaryotic cells, the genomic DNA is packaged into chromatin, the basic unit of which is the nucleosome. Studying the mechanism of chromatin formation under physiological conditions is inherently difficult due to the limitations of research approaches. Here we describe how to prepare a biochemical system called yeast nucleoplasmic extracts (YNPE). YNPE is derived from yeast nuclei, and the in vitro system can mimic the physiological conditions of the yeast nucleus in vivo. In YNPE, the dynamic process of chromatin assembly has been observed in real time at the single-molecule level by total internal reflection fluorescence microscopy. YNPE provides a novel tool to investigate many aspects of chromatin assembly under physiological conditions and is competent for single-molecule approaches.

A lariat cap is a naturally occurring substitute of a conventional mRNA cap and is found in a particular genomic setting in a few eukaryotic microorganisms. It is installed by the lariat capping ribozyme acting in cis. In principle, any RNA molecule in any organism can be equipped with a lariat cap in vivo when expressed downstream of a lariat capping ribozyme. Lariat capping is thus a versatile tool for studying the importance of the 5' end structure of RNA molecules. In this chapter, we present protocols to validate the presence of the lariat cap and measure the efficiency of in vivo cleavage by the lariat capping ribozyme.

DNA double-strand break (DSB) is one of the most deleterious types of DNA lesions threatening genome integrity. Cells have evolved several exquisite pathways to repair these breaks. Homologous recombination (HR) is an essential DSB repair mechanism that utilizes an intact homologous sequence as a template to repair DSBs with high fidelity. To initiate the HR repair, the 5'-ends of DSBs have to be nucleolytically cleaved by nucleases to generate 3'-single-strand DNA (ssDNA). Exposed 3'-ssDNA recruits the ssDNA binding protein complex RPA to activate the DNA damage checkpoint. RPA is subsequently replaced by Rad51 recombinase to form Rad51 nucleoprotein filament that catalyzes strand invasion and formation of the D-loop. Processing of 5'-ends (called resection) is a crucial step that determines the choice of repair pathways. Here we introduce an assay for monitoring the dynamics of resection at different locations from a site-specific DSB in yeast.

Budding yeast, as a eukaryotic model organism, has well-defined genetic information and a highly efficient recombination system, making it a good host to produce exogenous chemicals. Since most metabolic pathways require multiple genes to function in coordination, it is usually laborious and time-consuming to construct a working pathway. To facilitate the construction and optimization of multicomponent exogenous pathways in yeast, we recently developed a method called YeastFab Assembly, which includes three steps: (1) make standard and reusable genetic parts, (2) construct transcription units from characterized parts, and (3) assemble a complete pathway. Here we describe a detailed protocol of this method.

Diversified genomes derived from chromosomal rearrangements are valuable materials for evolution. Naturally, chromosomal rearrangements occur at extremely low frequency to ensure genome stability. In the synthetic yeast genome project (Sc2.0), an inducible chromosome rearrangement system named Synthetic Chromosome Rearrangement and Modification by LoxP-mediated Evolution (SCRaMbLE) is built to produce chromosomal rearrangements such as deletion, duplication, inversion, and translocation at high efficiency. Here, we detail the method to activate SCRaMbLE in a synthetic strain, to analyze the SCRaMbLEd genome, and to dissect the causative rearrangements for a desired phenotype after SCRaMbLEing.

The clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 system has enabled efficient, markerless genome editing in a wide range of organisms. However, there is an off-target effect and a limit to the area of precise editing. Bases that can be precisely edited are limited to within the 20-base pair gRNA-targeting site and protospacer adjacent motif (PAM) sequence. We have developed a CRISPR nickase system that can perform a precise genome-wide base editing in Saccharomyces cerevisiae using a single Cas9 nickase. This system can precisely edit a broader genomic region by the avoidance of double-strand break (DSB) and subsequent non-homologous end joining (NHEJ). Furthermore, unintended mutations were not found at off-target sites in this system. In combination with yeast gap repair cloning, precise genome editing of yeast cells can be performed in 5 days. Here, we describe the methods for precise and convenient genome editing using this novel CRISPR nickase system.

The use of the budding yeast Saccharomyces cerevisiae as a model genetic organism has been facilitated by the availability of a wide range of yeast shuttle vectors, plasmids that can be propagated in Escherichia coli and also in yeast, where they are stably maintained at low- or high-copy number, depending on the plasmid system. Here we provide an introduction to the low-copy (ARS/CEN) and multi-copy (2-μm-based) plasmids, the marker genes commonly used for plasmid selection in yeast, methods for transforming yeast and monitoring plasmid inheritance, and tips for working with yeast transformants.

Precipitation is a critical step to recover RNA of high purity. This chapter describes the principles of alcoholic precipitation as well as a standard, basic protocol with key advices to observe, but numerous variations on the theme are discussed. Indeed, several important parameters, such as the choice of salt, alcohol, or carrier, have to be considered to improve the efficiency of precipitation and the yield of RNA recovery.

Enabling precise gene integration is important for installing traits in the plants. One of the practical methods of achieving precise gene integration is by using the yeast FLP-FRT recombination system that is efficient in directing DNA integration into the "engineered" genomic sites. The critical parameters of this method include the use of the thermostable version of FLP protein and the promoter trap design to select site-specific integration clones. The resulting transgenic plants display stable expression that is transmitted to the progeny. Therefore, FLP-mediated site-specific integration method could be used for trait engineering in the crop plants or testing gene functions in the model plants.

Genomic engineering methods represent powerful tools to examine chromosomal modifications and to subsequently study their impacts on cellular phenotypes. However, quantifying the fitness impact of translocations, independently from base substitutions or the insertion of genetic markers, remains a challenge. Here we report a rapid and straightforward protocol for engineering either targeted reciprocal translocations at the base pair level of resolution between two chromosomes or multiple simultaneous rearrangements in the yeast genome, without inserting any marker sequence in the chromosomes. Our CRISPR/Cas9-based method consists of inducing either (1) two double-strand breaks (DSBs) in two different chromosomes with two distinct guide RNAs (gRNAs) while providing specifically designed homologous donor DNA forcing the trans-repair of chromosomal extremities to generate a targeted reciprocal translocation or (2) multiple DSBs with a single gRNA targeting dispersed repeated sequences and leaving endogenous uncut copies of the repeat to be used as donor DNA, thereby generating multiple translocations, often associated with large segmental duplications (Fleiss, et al. PLoS Genet 15:e1008332, 2019).

As a promising tool for dissecting the genetic basis of common diseases, expression quantitative trait loci (eQTL) study has attracted increasing research interest. Traditional eQTL methods focus on testing the associations between individual single-nucleotide polymorphisms (SNPs) and gene expression traits. A major drawback of this approach is that it cannot model the joint effect of a set of SNPs on a set of genes, which may correspond to biological pathways. To alleviate this limitation, in this chapter, we propose geQTL, a sparse regression method that can detect both group-wise and individual associations between SNPs and expression traits. geQTL can also correct the effects of potential confounders. Our method employs computationally efficient technique, thus it is able to fulfill large scale studies. Moreover, our method can automatically infer the proper number of group-wise associations. We perform extensive experiments on both simulated datasets and yeast datasets to demonstrate the effectiveness and efficiency of the proposed method. The results show that geQTL can effectively detect both individual and group-wise signals and outperform the state-of-the-arts by a large margin. This book chapter well illustrates that decoupling individual and group-wise associations for association mapping is able to improve eQTL mapping accuracy, and inferring individual and group-wise associations.

Apocarotenoids are carotenoid derivatives produced by the nonenzymatic or enzymatic cleavage of carotenoids, followed by different enzymatic modifications. In plants, apocarotenoids play different roles, such as attraction of pollinators and seeds dispersal, defense against pathogens and herbivores, protection against photo-oxidative stresses, stimulation and inhibition of plant growth and regulation of biological processes in the case of phytohormones abscisic acid and strigolactones. While carotenoids are in general plastid-localized metabolites, apocarotenoids can reach different final destinations inside or outside the cell. The mechanisms of apocarotenoid transport through biological membranes have been poorly studied. This chapter describes a method to characterize transmembrane transporters involved in the transport of polar and amphipathic apocarotenoids. This protocol was successfully used to in vitro characterize the transport activity of ATP-binding cassette (ABC) and multidrug and toxic extrusion (MATE) in microsomes isolated from Saccharomyces cerevisiae expressing these plant transporters.

Yeasts, like Arxula adeninivorans, Hansenula polymorpha, Pichia pastoris, Debaryomyces hansenii, Debaryomyces polymorphus, Schwanniomyces occidentalis, Yarrowia lipolytica, and Saccharomyces cerevisiae are frequently used producers of recombinant enzymes, particularly when posttranslational modifications are mandatory to obtain full functionality. The wide-range transformation/expression platform presented in this chapter can be used to select the optimal yeast host for high-level synthesis of the desired enzyme with favorable biochemical properties. This platform is composed of a selection marker and up to four expression modules in a linearized cassette. Here we describe the protocols for the assembly as well as the transformation of yeast strains with the respective cassettes, screening of transformants, the isolation and biochemical characterization of the enzymes, and finally a simple fermentation strategy to achieve maximal yields of the chosen recombinant enzyme.

Membrane contact sites between the endoplasmic reticulum (ER) and mitochondria function as a central hub for the exchange of phospholipids and calcium. The yeast Endoplasmic Reticulum-Mitochondrion Encounter Structure (ERMES) complex is composed of five subunits that tether the ER and mitochondria. Three ERMES subunits (i.e., Mdm12, Mmm1, and Mdm34) contain the synaptotagmin-like mitochondrial lipid-binding protein (SMP) domain. The SMP domain belongs to the tubular lipid-binding protein (TULIP) superfamily, which consists of ubiquitous lipid scavenging and transfer proteins. Herein, we describe the methods for expression and purification of recombinant Mdm12, a bona fide SMP-containing protein, together with the subsequent identification of its bound phospholipids by high-performance thin-layer chromatography (HPTLC) and the characterization of its lipid exchange and transfer functions using lipid displacement and liposome flotation in vitro assays with liposomes as model biological membranes. These methods can be applied to the study and characterization of novel lipid-binding and lipid-transfer proteins.

A plethora of biological processes like gene transcription, DNA replication, DNA recombination, and chromosome segregation are mediated through protein-DNA interactions. A powerful method for investigating proteins within a native chromatin environment in the cell is chromatin immunoprecipitation (ChIP). Combined with the recent technological advancement in next generation sequencing, the ChIP assay can map the exact binding sites of a protein of interest across the entire genome. Here we describe a-step-by step protocol for ChIP followed by library preparation for ChIP-seq from yeast cells.

CRISPR-Cas9 Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR) and CRISPR associated (Cas) is a microbial adaptive immune system that has revolutionized the field of molecular biology and genome engineering. The Type II CRISPR system consists of Cas9 nuclease of Streptococcus pyogenes and the RNA complex that guides Cas9 nuclease to a specific sequence of DNA in the genome. The CRISPR-Cas9 technology has reformed our ability to edit DNA and to regulate expression levels of genes of interest to high precision and accuracy. It is a powerful technology, which is used for genome engineering of a wide range of organisms for various applications. Here, we describe a method involving CRISPR-Cas9-mediated genome editing via nonhomologous end joining (NHEJ) or homology-directed repair (HDR) mechanisms for biotechnological applications in yeast. The complete procedure of genome editing including target sequence selection, cloning gRNA with a target sequence, transformation, and verification of the desired mutation/deletion or insertion can be achieved within 2-3 weeks in yeast.

Yeast was the first microorganism used by mankind for biotransformation of feedstock that laid the foundations of industrial biotechnology. Long historical use, vast amount of data, and experience paved the way for Saccharomyces cerevisiae as a first yeast cell factory, and still it is an important expression platform as being the production host for several large volume products. Continuing special needs of each targeted product and different requirements of bioprocess operations have led to identification of different yeast expression systems. Modern bioprocess engineering and advances in omics technology, i.e., genomics, transcriptomics, proteomics, secretomics, and interactomics, allow the design of novel genetic tools with fine-tuned characteristics to be used for research and industrial applications. This chapter focuses on established and upcoming yeast expression platforms that have exceptional characteristics, such as the ability to utilize a broad range of carbon sources or remarkable resistance to various stress conditions. Besides the conventional yeast S. cerevisiae, established yeast expression systems including the methylotrophic yeasts Pichia pastoris and Hansenula polymorpha, the dimorphic yeasts Arxula adeninivorans and Yarrowia lipolytica, the lactose-utilizing yeast Kluyveromyces lactis, the fission yeast Schizosaccharomyces pombe, and upcoming yeast platforms, namely, Kluyveromyces marxianus, Candida utilis, and Zygosaccharomyces bailii, are compiled with special emphasis on their genetic toolbox for recombinant protein production.

The budding yeast Saccharomyces cerevisiae (S. cerevisiae) has been a remarkable experimental model for the discovery of fundamental biological processes. The high degree of conservation of cellular and molecular processes between the budding yeast and higher eukaryotes has made it a valuable system for the investigation of the molecular mechanisms behind various types of devastating human pathologies. Genetic screens in yeast provided important insight into the toxic mechanisms associated with the accumulation of misfolded proteins. Thus, using yeast genetics and high-throughput screens, novel molecular targets with therapeutic potential have been identified. Here, we describe a yeast screen protocol for the identification of genetic modifiers of alpha-synuclein (aSyn) toxicity, thereby accelerating the identification of novel potential targets for intervention in Parkinson's disease (PD) and other synucleinopathies.

The yeast Saccharomyces cerevisiae is one of the preferred hosts for the production of terpenoids through metabolic engineering. A genetic screen to identify novel mutants that can increase the flux in the isoprenoid pathway has been lacking. We present here the method that has led to the development of a carotenoid based visual screen by exploiting the carotenogenic genes from the red yeast Rhodosporidium toruloides, an organism known to have high levels of carotenoids. We also discuss the methods to use this screen for the identification of mutants that can lead to higher isoprenoid flux. The carotenoid based screen was developed in S. cerevisiae using phytoene synthase RtPSY1 and a hyperactive mutant of the enzyme phytoene dehydrogenase, RtCRTI(A393T) from Rhodosporidium toruloides. As validation of the genetic screen is critical at all stages, we describe the method to validate the screen using a known flux increasing gene, a truncated HMG1 (tHMG1). To demonstrate how this screen can be exploited to isolate mutants, we described how targeted mutagenesis of candidate gene, SPT15 a TATA binding protein involved in the global transcription machinery can be carried out to yield novel mutants with increased metabolic flux. Since it is also important to ensure that the isolated mutants are enhancing general isoprenoid flux, we describe how this can be established using an alternate isoprenoid, α-farnesene.

Pseudouridylation is the most abundant of all RNA modifications. Pseudouridylation is dynamic and widespread among many different types of RNAs in living organisms, thus drawing a lot of recent interest from the RNA and epigenetics communities. To successfully carry out an investigation into RNA pseudouridylation, it is desirable to have a convenient and effective method capable of detection and quantification of pseudouridylation. Here, we present two such methods: one relies on pseudouridine (Ψ)-specific CMCT modification followed by reverse transcription/primer-extension (semiquantitative), and the other is based on site-specific cleavage and radiolabeling followed by nuclease digestion and TLC (quantitative). Although only semiquantitative, the CMCT and reverse transcription-based method is capable of detecting multiple Ψs (present in the same RNA molecule) in one reaction. In contrast, the second method, based on site-specific cleavage/labeling, nuclease digestion, and TLC, is quantitative, but can be used to analyze only one site at a time. These two methods can be used independently or in combination.

Yeasts are efficient cell factories and are commonly used for the production of recombinant proteins for biopharmaceutical and industrial purposes. For such products high levels of correctly folded proteins are needed, which sometimes requires improvement and engineering of the expression system. The article summarizes major breakthroughs that led to the efficient use of yeasts as production platforms and reviews bottlenecks occurring during protein production. Special focus is given to the metabolic impact of protein production. Furthermore, strategies that were shown to enhance secretion of recombinant proteins in different yeast species are presented.

Structural maintenance of chromosomes (SMC) complexes play pivotal roles in controlling chromatin organization. Condensin is an essential SMC complex that compacts chromatin to form condensed chromosomes in mitosis. Complete condensin inactivation is necessary to reveal how condensin converts interphase chromatin into mitotic chromosomes. Here, we have developed a condensin depletion system in fission yeast that combines transcriptional repression with auxin-inducible protein degradation. This achieves efficient condensin depletion without need for a temperature shift. Our system is useful when studying how condensin contributes to chromosome architecture and is applicable to the study of other SMC complexes.

The product quality of recombinant proteins is of major importance for their intended purpose. The initial characterization of both simple and complex products should be performed as soon as practical. However, to comply with this high standard, appropriate selection of complementary methods is required. Therefore, conventional and sophisticated techniques are available, providing diverse information about the product quality.In this chapter methods are presented, which enable the determination of the overall protein quality, their aggregation and peptide composition. Methods applied for the determination of posttranslational modifications such as glycan analysis are not described. In this regard, chromatographic, high-resolution technologies for the integrity of proteins as well as Western blot with specific detection methods are introduced, and individual strengths and perceived limitations are highlighted.

Microbial cell surface display technology can redesign cell surfaces with functional proteins and peptides to endow cells some unique features. Foreign peptides or proteins are transported out of cells and immobilized on cell surface by fusing with anchoring proteins, which is an effective solution to avoid substance transfer limitation, enzyme purification, and enzyme instability. As the most frequently used prokaryotic and eukaryotic protein surface display system, bacterial and yeast surface display systems have been widely applied in vaccine, biocatalysis, biosensor, bioadsorption, and polypeptide library screening. In this review of bacterial and yeast surface display systems, different cell surface display mechanisms and their applications in biocatalysis as well as biosensors are described with their strengths and shortcomings. In addition to single enzyme display systems, multi-enzyme co-display systems are presented here. Finally, future developments based on our and other previous reports are discussed.

The nucleolytic degradation of the 5'-ending strand of a Double-Strand DNA break (DSB) is necessary to initiate homologous recombination to correctly repair the break. This process is called DNA end resection and it is finely regulated to prevent genome rearrangements. Here, we describe a protocol to quantify DSB resection rate by qPCR, which could be applied to every organisms whenever the break site and its flanking region sequences are known.

Recent advances in the synthetic biology field have enabled the development of new molecular biology techniques used to build specialized bacteriophages with new functionalities. Bacteriophages have been engineered towards a wide range of applications including pathogen control and detection, targeted drug delivery, or even assembly of new materials.In this chapter, two strategies that have been successfully used to genetically engineer bacteriophage genomes are addressed: a yeast-based platform and bacteriophage recombineering of electroporated DNA.

Double-stranded RNA (dsRNA) molecules are widely found in yeasts and filamentous fungi. It has been suggested that these molecules may play an important role in the evolution of eukaryote genomes and could be a valuable tool in yeast typing. The characterization of these extrachromosomal genetic elements is usually a laborious process, especially when trying to analyze a large number of samples. In this chapter, we describe a simple method to isolate dsRNA elements from yeasts using low amounts of starting material and their application to different Xanthophyllomyces dendrorhous strains and other psychrotolerant carotenogenic yeasts. Furthermore, the methodologies for enzymatic and hybridization characterizations and quantification of relative dsRNA abundance are detailed.

The protein quality control network consists of multiple proteins or protein complexes that monitor proteome integrity by mediating protein folding and the removal of proteins that cannot be folded. An integral component of this network is the ubiquitin-proteasome system, which controls the degradation of thousands of cellular proteins. A number of questions remain unanswered regarding the degradation of misfolded proteins. For example, how are substrates recognized and triaged? What are the identities of the components involved? And finally, what substrates are targeted by any given component of the quality control network? Finding answers to these questions is what inspires our work in protein quality control. Further characterization of protein quality control mechanisms requires methods that can reliably quantify turnover rates of model substrates. One such method is based on flow cytometry. Here, we present protocols detailing how to assess protein stability with flow cytometry and how fluorescence-activated cell sorting (FACS) can be used to screen for factors important for protein quality control and protein turnover.

Chromatin immunoprecipitation (ChIP) is an invaluable method to characterize interactions between proteins and genomic DNA, such as the genomic localization of transcription factors and posttranslational modification of histones. DNA and proteins are reversibly and covalently crosslinked using formaldehyde. Then the cells are lysed to release the chromatin. The chromatin is fragmented into smaller sizes either by micrococcal nuclease (MNase) or sonication and then purified from other cellular components. The protein-DNA complexes are enriched by immunoprecipitation (IP) with antibodies that target the epitope of interest. The DNA is released from the proteins by heat and protease treatment, followed by degradation of contaminating RNAs with RNase. The resulting DNA is analyzed using various methods, including PCR, qPCR, or sequencing. This protocol outlines each of these steps for both yeast and human cells.

Mitophagy, which is the degradation of mitochondria via selective autophagic machinery, is thought to be involved in regulating the mass and function of mitochondria. Methods for detection of mitophagy have been reported for several fungal cells including some budding yeast, methylotrophic yeast, and filamentous fungi. Mitophagy in Saccharomyces cerevisiae is activated under nitrogen-poor conditions; however, the regulatory mechanism of mitophagy in most fungi has not been elucidated. Here we describe methods to monitor mitophagy in the pathogenic yeast Candida glabrata under iron-depleted conditions but not under nitrogen starvation. This observation may provide some clues to elucidate the physiological roles of mitophagy in eukaryotes.

Mitochondrial autophagy (mitophagy) is a mitochondrial quality control mechanism that selectively removes damaged mitochondria via autophagic degradation. Autophagic adaptor/receptor proteins contribute to the selective degradation of damaged mitochondria by autophagy. A part of them containing both ubiquitin binding domains and Atg8 interacting motif (AIM)/LC3 interacting region (LIR) motifs, which bind to the autophagy-related protein 8 (Atg8) family (LC3 and GABARAP family), lead ubiquitylated (damaged) mitochondria to selective removal. On the other hand, some specific outer mitochondrial membrane-anchored proteins containing AIM/LIR motif function as another type of autophagy adaptor/receptor proteins. Here I briefly summarize mechanisms of mitophagy and its related proteins.

Vector construction and gene cloning are ubiquitous techniques essential to all fields of biological and medical research. They are the first steps in many endeavors leading to expressing proteins to understand gene function and regulation. However, they can often be rate-limiting, particularly in multi-gene studies, due to the time and effort required to assemble gene constructs and to identify the optimal constructs for protein expression.The SureVector system was developed to address this by enabling the rapid and reliable assembly of multiple DNA modules into a recombinant plasmid containing a gene-of-interest (GOI). It harnesses the power of synthetic biology to combine DNA modules from standard parts into a customized vector that expresses proteins in bacterial, mammalian, or yeast cells. The key advantages of the innovative SureVector system include rapid custom vector generation, enhanced flexibility to assemble new vectors quickly as experimental requirements change, and the reliable and precise assembly of fully interchangeable standard DNA modules that retain their functionality. The SureVector system is the only next-generation plasmid assembly technology to guarantee assembly of multiple functional DNA modules.

Incorporation into DNA of nucleoside analogs like 5-bromo-2'-deoxyuridine (BrdU) is a powerful tool for in vivo studies of DNA synthesis during replication and repair. Immunoprecipitation of BrdU-labeled DNA analyzed by DNA sequencing (BrdU-IP-seq) allows for genome-wide, sequence-specific tracking of replication origin and replication fork dynamics under different conditions, such as DNA damage and replication stress, and in mutant strains. We have recently developed a quantitative method for BrdU-IP-seq (qBrdU-seq) involving DNA barcoding to enable quantitative analysis of multiple experimental samples subjected to BrdU-IP-seq. After initial barcoding of multiple, individually BrdU-labeled genomic DNA samples, a pooling strategy is used for all subsequent steps including immunoprecipitation, amplification, and sequencing, which eliminates sample-to-sample variability in these steps. Parallel processing of an aliquot of the pooled input sample provides a direct control for the normalization of the data and yields results that allow quantitative comparisons of the experimental samples. Though developed for the analysis of S. cerevisiae, this method should be directly adaptable to other model systems.

The ability to rapidly assess chromosome instability (CIN) has enabled profiling of most yeast genes for potential effects on genome stability. The A-like faker (ALF) assay is one of several qualitative and quantitative marker loss assays that indirectly measure loss or conversion of genetic material using a counterselection step. The ALF assay relies on the ability to count spurious mating events that occur upon loss of the MATα locus of haploid Saccharomyces cerevisiae strains. Here, we describe the deployment of the ALF assay for both rapid and simple qualitative, and more in-depth quantitative analysis allowing determination of absolute ALF frequencies.

Instability of repetitive DNA sequences causes numerous hereditary disorders in humans, the majority of which are associated with trinucleotide repeat expansions. Here, we describe a unique system to study instability of triplet repeats in a yeast experimental setting. Using fluctuation assay and the novel program FluCalc we are able to accurately estimate the rates of large-scale expansions, as well as repeat-mediated mutagenesis and gross chromosomal rearrangements for different repeat sequences.

In this chapter, a step-by-step approach on how to transform non-conventional yeasts or fungi into platform organisms is described. The non-conventional glycolipid producing yeast Starmerella bombicola (and in some cases also Pseudohyphozyma bogoriensis) is used as a case study. And more specifically how to engineer it toward production of new-to-nature glycolipids like bola sophorolipids. When starting genetic engineering efforts for non-lab strains, one should start at the very basis: identifying selection markers and possibly developing auxotrophic strains. Once this is done, the quest for the development of an optimal transformation method can be started. After optimization thereof, knock-out and knock-in strains can be generated based upon the specific strategy/aim. Sometimes this can lead to unexpected, but yet very interesting findings. To fully and efficiently expand the potential as a production platform of these yeast strains, a range of additional molecular tools are required. A well-equipped molecular toolbox should contain a set of characterized promotors, terminators, and defined genomic landing paths. The availability of an episomal system greatly facilitates engineering and screening efforts, but also offers the possibility of developing more advanced engineering techniques such as Crispr-Cas. InBio.be is a world leading pioneer to do this for the yeast S. bombicola and combined, these efforts will result in the commercialization of new types of glycolipids in the next few years.

Since its discovery nearly 40 years ago, many components of the ubiquitin-proteasome system (UPS) have been identified and characterized in detail. However, a key aspect of the UPS that remains largely obscure is the signals that initiate the interaction of a substrate with enzymes of the UPS machinery. Understanding these signals is of particular interest for studies that examine the mechanism of substrate recognition for proteins that have adopted a non-native structure, as part of the cellular protein quality control (PQC) defense mechanism. Such studies are quite salient as the entire proteome makes up the potential battery of PQC substrates, and yet only a limited number of ubiquitination pathways are known to handle misfolded proteins. Our current research aims at understanding how a small number of PQC ubiquitin-protein ligases specifically recognize and ubiquitinate the overwhelming assortment of misfolded proteins. Here, we present a new proteogenomic approach for identifying and characterizing recognition motifs within degradation elements (degrons) in a high-throughput manner. The method utilizes yeast growth under restrictive conditions for selecting protein fragments that confer instability. The corresponding cDNA fragments are analyzed by next-generation sequencing (NGS) that provides information about each fragment's identity, reading frame, and abundance over time. This method was used by us to identify PQC-specific and compartment-specific degrons. It can readily be modified to study protein degradation signals and pathways in other organisms and in various settings, such as different strain backgrounds and under various cell conditions, all of which can be sequenced and analyzed simultaneously.

Modification of DNA nucleobases has a profound effect on genome function. We developed a method that maps the positions of the modified DNA nucleobases throughout genomic DNA. This method couples in vitro nucleobase excision with massively parallel DNA sequencing to determine the location of modified DNA nucleobases with single base precision. This protocol was used to map uracil incorporation and UV photodimers in DNA, and a modification of the protocol has been used to map sparse modification events in cells. The Excision-seq protocol is broadly applicable to a variety of base modifications for which an excision enzyme is available.

The genetic information contained within the DNA molecule is highly susceptible to chemical and physical insult, caused by both endogenous and exogenous sources that can generate in the order of thousands of lesions a day in each of our cells (Lindahl, Nature 362(6422):709-715, 1993). DNA damages interfere with DNA metabolic processes such as transcription and replication and can be potent inhibitors of cell division and gene expression. To combat these regular threats to genome stability, a host of DNA repair mechanisms have evolved. When DNA lesions are left unrepaired due to defects in the repair pathway, mutations can arise that may alter the genetic information of the cell. DNA repair is thus fundamental to genome stability and defects in all the major repair pathways can lead to cancer predisposition. Therefore, the ability to accurately measure DNA damage at a genomic scale and determine the level, position, and rates of removal by DNA repair can contribute greatly to our understanding of how DNA repair in chromatin is organized throughout the genome. For this reason, we developed the 3D-DIP-Chip protocol described in this chapter. Conducting such measurements has potential applications in a variety of other fields, such as genotoxicity testing and cancer treatment using DNA damage inducing chemotherapy. Being able to detect and measure genomic DNA damage and repair patterns in individuals following treatment with chemotherapy could enable personalized medicine by predicting response to therapy.

The installation of unnatural amino acids into proteins of living cells is an enabling technology that facilitates an enormous number of applications. UV-activatable crosslinker amino acids allow the formation of a covalent bond between interaction partners in living cells with nearly perfect spatial and temporal control. Here, we describe how this method can be employed to map chromatin interactions and to follow these interactions across the cell cycle in synchronized yeast populations. This method thereby provides unprecedented insights into the molecular events controlling chromatin reorganization in mitosis. As similar tools are available for other organisms, it should be possible to derive similar strategies for these and for other synchronizable processes.

The budding yeast Saccharomyces cerevisiae has served as an excellent model system for studying highly conserved biological pathways including pathways involved in genome transmission and maintenance. The Chromosome Transmission Fidelity (CTF) colony color assay was developed to assess chromosome instability (CIN) in yeast, by monitoring the loss or gain during cell division of an artificial chromosome fragment carrying a visual marker. The CTF assay monitors changes in chromosome number, allowing the detection of mutants that exhibit increased rates of chromosome nondisjunction or chromosome loss. In this article, we describe the SUP11-marker-based CTF assay system, and the methodologies for both qualitative analysis of mutants affecting chromosome transmission, and quantitative analysis for determining the types and rates of errors in chromosome transmission using half-sector analysis.

The ends of linear chromosomes are constituted of repetitive DNA sequences called telomeres. Telomeres, nearby regions called subtelomeres, and their associated factors prevent chromosome erosion over cycles of DNA replication and prevent chromosome ends from being recognized as DNA double-strand breaks (DSBs). This raises the question of how cells repair DSBs that actually occur near chromosome ends. One approach is to edit the genome and engineer cells harboring inducible DSB sites within the subtelomeric region of different chromosome ends. This provides a reductionist and tractable genetic model system in which mechanisms mediating repair can be dissected via genetics, molecular biology, and microscopy tools.

We provide a detailed protocol for robot-assisted, genome-wide measurement of fitness in the model yeast Saccharomyces cerevisiae using Quantitative Fitness Analysis (QFA). We first describe how we construct thousands of double or triple mutant yeast strains in parallel using Synthetic Genetic Array (SGA) procedures. Strains are inoculated onto solid agar surfaces by liquid spotting followed by repeated photography of agar plates. Growth curves are constructed and the fitness of each strain is estimated. Robot-assisted QFA, can be used to identify genetic interactions and chemical sensitivity/resistance in genome-wide experiments, but QFA can also be used in smaller scale, manual workflows.

Tyrosine phosphorylation is an essential posttranslational modification in intracellular signaling molecules. Since tyrosine phosphorylation occurs in less than 0.1 % of all phosphorylated amino acids in mammalian cells, it is difficult to detect the nascent phosphotyrosine at a high signal-to-noise ratio due to high intracellular backgrounds (i.e., unexpected crosstalks among endogenous signaling molecules). In order to address this issue, we reconstituted the mammalian signaling pathway involving an extracellular ligand and a receptor tyrosine kinase (RTK) in Saccharomyces cerevisiae, a lower eukaryote that lacks endogenous tyrosine kinases. In this chapter, we describe a method for high-throughput analysis of ligand-receptor interaction by combining the yeast cell-surface display technique with an automated single-cell analysis and isolation system. Yeast cells coexpressing the cell-wall-anchored form of the human epidermal growth factor (EGF) and the human EGF receptor (EGFR) fused with a signal peptide at the N terminus facilitated the interaction of EGF with EGFR in an autocrine manner, followed by EGFR oligomerization and subsequent autophosphorylation. Furthermore, yeast cells expressing cell-wall-anchored forms of a conformationally constrained random peptide library instead of EGF are treated with a fluorophore-labeled anti-phosphorylated EGFR antibody and then subjected to the automated single-cell analysis and isolation system. The yeast cells with the highest level of fluorescence were shown to display novel and efficient EGFR agonistic peptides. Thus, our yeast display technique serves as a quantitative measurement for RTK activation, which is applicable to high-throughput de novo screening of RTK agonistic peptides.

Plant ethylene receptors bind ethylene with high affinity. Most of the characterization of ethylene binding to the receptors has been carried out using a radioligand-binding assay on functional receptors expressed in yeast. In this chapter, we describe methods for expressing ethylene receptors in yeast and conducting ethylene-binding assays on intact yeast and yeast membranes. The ethylene-binding assays can be modified to analyze ethylene binding to intact plants and other organisms as well as membranes isolated from any biological source.

Mitochondria are thought to have evolved from ancestral proteobacteria and, as a result of symbiosis, became an indispensable organelle in all eukaryotic cells. Mitochondria perform essential functions that provide the cell with ATP, amino acids, phospholipids, and both heme and iron-sulfur clusters. However, only 1% of mitochondrial proteins are encoded by the mitochondrial genome, while the remaining 99% are encoded in the nucleus. This raises a logistical challenge to the cell, as these nuclear-encoded proteins have to be translated, delivered to the mitochondrial surface, and translocated to its various compartments. Over the past decade, it was shown that subsets of mRNAs encoding mitochondrial proteins (mMPs) are localized to the mitochondrial surface in both yeast and mammalian cells. Moreover, factors (e.g., RNA-binding proteins) have been discovered that facilitate mMP targeting, and their loss leads to RNA mislocalization and defects in mitochondrial function (e.g., deficient respiration). Therefore, there is a demand in the field of mitochondrial biology to accurately measure mMP localization to the mitochondrial surface. In this chapter, we describe two techniques that allow for the visualization of mMPs using single-molecule fluorescent in situ hybridization and preparation of a highly enriched mitochondrial fraction followed by quantitative real-time PCR. Together, these techniques constitute powerful tools to link changes in mMP trafficking to defects in mitochondrial physiology.