Search

[EN] The WELLFORMED research project, ongoing at the CEMSIG Research Center of the Politehnica University of Timisoara, proposes to study a new technological solution for built-up beams made of corrugated steel sheets for the web and thin-walled cold-formed steel profiles for the flanges, connected by resistance spot welding. Within the research project, the experimental work includes tensile-shear tests on the lap joint spot-welded specimens, were different combinations of steel sheets with various thicknesses were tested and, tests on full scale beams in bending. The study intends to demonstrate the feasibility of the proposed solutions, to assess their performance and to enlarge the knowledge by using numerical simulations for the optimization of the current solution and to define the limits of the solution’s applicability.

[EN] The WELLFORMED research project, ongoing at the CEMSIG Research Center of the Politehnica University of Timisoara, proposes to study a new technological solution for built-up beams made of corrugated steel sheets for the web and thin-walled cold-formed steel profiles for the flanges, connected by resistance spot welding. Within the research project, the experimental work includes tensile-shear tests on the lap joint spot-welded specimens, were different combinations of steel sheets with various thicknesses were tested and, tests on full scale beams in bending. The study intends to demonstrate the feasibility of the proposed solutions, to assess their performance and to enlarge the knowledge by using numerical simulations for the optimization of the current solution and to define the limits of the solution’s applicability.

[EN] Explosions produced in urban areas by the detonation of explosives are low-probability but high-impact events. When they occur in the immediate vicinity of buildings, the explosions can pose a high risk to the structural integrity (local/global failures) and to the occupants (risk of injury, death). Therefore, the design and the construction of the buildings should contain preventive measures to increase the robustness of the structures. The paper presents the results of recent research carried out on the safety of building structures under extreme actions. Blast tests performed on two identical 3D specimen extracted from a typical moment resisting steel frame structure, allow to calibrate the numerical models of a full scale building structural frame system and evaluate the consequences of close-in detonations on the structural elements. The data of the experimental testing, combined with the numerical modelling, allow to investigate different factors, such as dynamic factors that affect the local failure mechanism and the residual capacity of steel columns under different blast scenarios.

[EN] The WELLFORMED research project, ongoing at the CEMSIG Research Center of the Politehnica University of Timisoara, proposes to study a new technological solution for built-up beams made of corrugated steel sheets for the web and thin-walled cold-formed steel profiles for the flanges, connected by resistance spot welding. Within the research project, the experimental work includes tensile-shear tests on the lap joint spot-welded specimens, were different combinations of steel sheets with various thicknesses were tested and, tests on full scale beams in bending. The study intends to demonstrate the feasibility of the proposed solutions, to assess their performance and to enlarge the knowledge by using numerical simulations for the optimization of the current solution and to define the limits of the solution’s applicability.

[EN] Explosions produced in urban areas by the detonation of explosives are low-probability but high-impact events. When they occur in the immediate vicinity of buildings, the explosions can pose a high risk to the structural integrity (local/global failures) and to the occupants (risk of injury, death). Therefore, the design and the construction of the buildings should contain preventive measures to increase the robustness of the structures. The paper presents the results of recent research carried out on the safety of building structures under extreme actions. Blast tests performed on two identical 3D specimen extracted from a typical moment resisting steel frame structure, allow to calibrate the numerical models of a full scale building structural frame system and evaluate the consequences of close-in detonations on the structural elements. The data of the experimental testing, combined with the numerical modelling, allow to investigate different factors, such as dynamic factors that affect the local failure mechanism and the residual capacity of steel columns under different blast scenarios.

[EN] Explosions produced in urban areas by the detonation of explosives are low-probability but high-impact events. When they occur in the immediate vicinity of buildings, the explosions can pose a high risk to the structural integrity (local/global failures) and to the occupants (risk of injury, death). Therefore, the design and the construction of the buildings should contain preventive measures to increase the robustness of the structures. The paper presents the results of recent research carried out on the safety of building structures under extreme actions. Blast tests performed on two identical 3D specimen extracted from a typical moment resisting steel frame structure, allow to calibrate the numerical models of a full scale building structural frame system and evaluate the consequences of close-in detonations on the structural elements. The data of the experimental testing, combined with the numerical modelling, allow to investigate different factors, such as dynamic factors that affect the local failure mechanism and the residual capacity of steel columns under different blast scenarios.

[EN] The WELLFORMED research project, ongoing at the CEMSIG Research Center of the Politehnica University of Timisoara, proposes to study a new technological solution for built-up beams made of corrugated steel sheets for the web and thin-walled cold-formed steel profiles for the flanges, connected by resistance spot welding. Within the research project, the experimental work includes tensile-shear tests on the lap joint spot-welded specimens, were different combinations of steel sheets with various thicknesses were tested and, tests on full scale beams in bending. The study intends to demonstrate the feasibility of the proposed solutions, to assess their performance and to enlarge the knowledge by using numerical simulations for the optimization of the current solution and to define the limits of the solution’s applicability.

[EN] Explosions produced in urban areas by the detonation of explosives are low-probability but high-impact events. When they occur in the immediate vicinity of buildings, the explosions can pose a high risk to the structural integrity (local/global failures) and to the occupants (risk of injury, death). Therefore, the design and the construction of the buildings should contain preventive measures to increase the robustness of the structures. The paper presents the results of recent research carried out on the safety of building structures under extreme actions. Blast tests performed on two identical 3D specimen extracted from a typical moment resisting steel frame structure, allow to calibrate the numerical models of a full scale building structural frame system and evaluate the consequences of close-in detonations on the structural elements. The data of the experimental testing, combined with the numerical modelling, allow to investigate different factors, such as dynamic factors that affect the local failure mechanism and the residual capacity of steel columns under different blast scenarios.

[EN] The WELLFORMED research project, ongoing at the CEMSIG Research Center of the Politehnica University of Timisoara, proposes to study a new technological solution for built-up beams made of corrugated steel sheets for the web and thin-walled cold-formed steel profiles for the flanges, connected by resistance spot welding. Within the research project, the experimental work includes tensile-shear tests on the lap joint spot-welded specimens, were different combinations of steel sheets with various thicknesses were tested and, tests on full scale beams in bending. The study intends to demonstrate the feasibility of the proposed solutions, to assess their performance and to enlarge the knowledge by using numerical simulations for the optimization of the current solution and to define the limits of the solution’s applicability.

[EN] Explosions produced in urban areas by the detonation of explosives are low-probability but high-impact events. When they occur in the immediate vicinity of buildings, the explosions can pose a high risk to the structural integrity (local/global failures) and to the occupants (risk of injury, death). Therefore, the design and the construction of the buildings should contain preventive measures to increase the robustness of the structures. The paper presents the results of recent research carried out on the safety of building structures under extreme actions. Blast tests performed on two identical 3D specimen extracted from a typical moment resisting steel frame structure, allow to calibrate the numerical models of a full scale building structural frame system and evaluate the consequences of close-in detonations on the structural elements. The data of the experimental testing, combined with the numerical modelling, allow to investigate different factors, such as dynamic factors that affect the local failure mechanism and the residual capacity of steel columns under different blast scenarios.