Search

The shale gas productivity model based on shale gas nonlinear seepage mechanism is an effective way to reasonably predict productivity. The incomplete gas nonlinear effects considered in the current production prediction models can lead to inaccurate production prediction. Based on the conventional five-zone compound flow model, comprehensive gas nonlinearities were considered in the improved compound linear flow model proposed in the paper and a semianalytical solution for productivity was obtained. The reliability of the productivity model was verified by the field data, and then, the 20-year production performance analysis of the gas well was studied. Ultimately, the key influencing factors of the fracture control stage and matrix control stage have been analyzed. Research indicated the following: (1) the EUR predicted by the productivity model is higher than the EUR that the comprehensive nonlinear effects are not considered, which demonstrated that the various nonlinear effects cannot be neglected during the production prediction to ensure the greater calculation accuracy; (2) during the early production stage of shale reservoir, the adsorbed gas is basically not recovered, and the cumulative adsorption contribution rate does not exceed 10%. The final adsorption gas contribution rate is 23.28%, and the annual adsorption rate can exceed 50% in the 20th year, showing that free gas and adsorbed gas are, respectively, important sources of the early stage of production and long-term stable production; (3) the widely ranged three-dimensional fracturing reformation of shale reservoirs and reasonable bottom hole pressure in the later matrix development process should be implemented to increase the effective early production of the reservoir and ensure the earlier gas production process of the matrix development. The findings of this study can help for better ensuring the prediction accuracy of the estimated ultimate recovery and understanding the main influencing factors of the dynamic performance of gas wells so as to provide a theoretical reference for production optimization and development plan formulation of the shale gas reservoirs. [ABSTRACT FROM AUTHOR]

The relationship between dew and airborne particles is important in urban ecosystems, but the capability of dew to remove airborne particles remains unclear. During 2015 in Changchun, China, 74 dew and particle samples were collected simultaneously to investigate their chemical characteristics under normal, fog, and haze conditions. Analyses included measuring total dissolved solids, total suspended particulates, PM2.5 and PM10 concentrations, major cations (NH4+, Na+, K+, Ca2+, and Mg2+), major anions (F−, Cl−, SO42-, and NO3-), and organic and elemental carbon. Results showed that air quality deteriorated during haze but improved in fog. The particle size distributions, major cations, and carbonaceous species documented in the dew and airborne particles demonstrated consistent synchronous patterns with values descending in the order haze > normal > fog conditions. We found that dew is a good indicator of near-surface air quality. Specifically, its water-soluble ions and carbonaceous species could be used to distinguish emission sources and to identify the presence of secondary organic carbon. Dew is more effective at removing airborne particles in normal weather than in haze or fog conditions; PM2.5 removal rates were 21.5%, 15.2%, and 13.7% on normal, foggy, and hazy days, respectively. Dew condensation processes reduce concentrations of gaseous and particulate pollutants in the near-surface layer. [ABSTRACT FROM AUTHOR]

In order to obtain the optimized technological parameters of hot air-vacuum combined drying of lettuce, the effects of hot air temperature, intermediate conversion moisture content, slice thickness and vacuum degree (four influence factors) on lettuce drying were explored. The drying time and rehydration ratio of lettuce were the experimental indices, and the relationships between the experimental indices and the influence factors were analyzed by using the response surface methodology. The regression mathematical models were established. The optimized technological parameters of hot air and vacuum combined drying are 50C hot air temperature, 40% intermediate conversion moisture content (w.b.), 20 kPa vacuum degree and 5 mm slice thickness. Practical Applications Combined drying is widely used in food, which is considered as an effective method to achieve energy conservation and shelf life. The objective of this paper was using response surface methodology to obtain optimized hot air vacuum drying parameters for lettuce. The significance of this research can improve the drying efficiency, provide a reference for other fruits and vegetables' drying process optimization and provide a technical basis for the drying of lettuce and the designing of related equipment. [ABSTRACT FROM AUTHOR]