Search

When multiple bus vehicles send priority requests at a single intersection, the existing fixed-phase sequence control methods cannot provide priority traffic request services for multiphase bus vehicles. In view of the conflict of multiphase bus priority requests at intersections, the priority vehicle traffic sequence is determined, which is the focus of this study. In this paper, a connected vehicle-enabled transit signal priority system (CV-TSPS) has been proposed, which uses vehicle-infrastructure communication function (V2I) technology to obtain real-time vehicle movement, road traffic states, and traffic signal light phase information. By developing a deep Q-learning neural network (DQNN), especially for optimizing traffic signal control strategy, the public transit vehicles will be prioritized to improve their travel efficiency, while the overall delay of road traffic flow will be balanced to ensure the safe and orderly passage of intersections. In order to verify the validity of the model, the SUMO traffic analysis software has been applied to simulate real-time traffic control, and the experimental results show that compared with the traditional timing signal control, the loss time of vehicles is reduced by nearly 40%, and the cumulative loss time per capita is reduced by nearly 43.5%, and a good control effect is achieved. In the case of medium and low densities, it is better than the solid scheduled traffic control scheme. [ABSTRACT FROM AUTHOR]

Intelligent traffic signal control is one of the important means to ensure traffic safety. Effective signal control can make traffic flow fast and smooth, which first needs current and future traffic information. As the control of one intersection may affect adjacent intersections, this paper proposes to predict future traffic flow with consideration of multi-intersections. It can dynamically improve traffic conditions and reduce traffic congestion. Based on various nonlinear spatial relationships at correlated multi-intersections and the potential time-dependent relationship in traffic volume, a traffic flow prediction method named CNNformer which combines transformer with CNN, is proposed. The convolution neural network (CNN) and transformer are used to extract the spatial and temporal features of correlated multiple intersections. The learnable time code is embedded into transformer's location code, and the location information and time information are injected into the model to help it learn the time characteristics of traffic volume. This study also considers the impact of cyclical traffic flow pattern and proposes CNNformer+. In the method, all of the data from the previous time window, as well as the data from the prior week and month, are correspondingly entered into the network. Finally, the output is generated through average pooling, realizing the learning of cyclical traffic flow characteristics. In the experiment, CNNformer+ and the state-of-the-art traffic flow prediction methods are compared using simulated data. The results show that the proposed model outperforms the existing models in prediction accuracy and efficiency. [ABSTRACT FROM AUTHOR]

The positive effect of traffic-responsive signal control can be assured when real-time traffic data is reliable, but data reliability may be an issue that depends on the number of probe vehicles equipped with navigation devices or smartphones. However, there is a high chance of improving reliability with the recent deployment of connected vehicles (CVs) that use the vehicle-to-everything (V2X) communication data. Therefore, this paper proposes a traffic signal control strategy that utilizes V2X communication data obtained from CV operations, which is called the capacity waste reduction (CWR) strategy. In this strategy, vehicle queues on each road lane as an intersection approaches are initially estimated using V2X data. Then, the signal control algorithm determines the duration of the green signal for the currently applied phase based on the estimated vehicle queues. Furthermore, the strategy includes an algorithm for active priority signal control for the vehicles of bus rapid transit systems. The efficiency of the provided control strategy is tested with the VISSIM microsimulation program at different levels of the market penetration rate (MPR) of CVs. Based on the results of the experiment, the proposed strategy shows positive effects in both decreasing travel delay and increasing traffic flow even at the low levels of MPR of CVs. The results of the proposed strategy can be used as the base data for the development of smart intersection operations. [ABSTRACT FROM AUTHOR]

The performance of the traffic system can drastically drop when nonrecurrent congestion caused by incidents occurs. Early detection and clearing of traffic incidents will enable the mitigation of the congestion and early restoration of normal traffic conditions. The research in this paper utilized the vehicle information from the recent technological advancement in transportation systems, connected vehicles (CV), and loop-detector information for nonconnected vehicles (NCVs) and developed a novel algorithm to (1) control traffic signals for normal traffic conditions in the absence of incidents, (2) detect traffic incidents using CV/NCV information, and (3) control traffic signals during the occurrence and dissipation of incidents. All the 3 strategies were integrated into one algorithm, which runs as per the real-time traffic conditions, in the presence or absence of incidents. Space-mean speeds of the vehicles on nonincident lanes and throughput maximization criteria were taken as the indicators for the activation of specific signal timings directed at the incident-affected approach. Diverse incident scenarios were tested on a four-legged isolated intersection using the VISSIM simulation tool. Incident detection results showed a higher detection rate and lower mean detection time at higher CV penetration and higher traffic volumes, and at the incident locations nearer to the stop-line. The proposed incident-responsive signal control strategy at 40% and higher CV penetration showed better performance over EPICS adaptive signal control solution, in reducing average travel time delay and the average number of stops per vehicle. [ABSTRACT FROM AUTHOR]

Urban traffic control systems (UTCSs) are deployed to a great number of urban cities despite lacking feedback when adjusting the traffic signals. The development of reinforcement learning (RL) makes it possible to apply feedback to UTCS, and great efforts have been made on RL-based traffic control strategies. However, those studies are regardless of the traffic flow theory of the network and the road users' perspectives on the performance of traffic. This study proposes a multiagent reinforcement learning (MARL) based traffic control strategy, in which each intersection in a macroscopic fundamental diagram (MFD) region was controlled by one agent using the level of services (LOS) and MFD-based parameters as rewards. The proposed MARL strategy was evaluated by simulation in a 3×3 grid network compared with pretimed, actuated, and MFD-based traffic control strategies. The evaluation results showed that, at different demand levels, the proposed MARL strategy outperforms the other three traffic control strategies in terms of average intersection queue length and average intersection waiting time to a different extent. Results also showed that the proposed MARL dissipated the congestion faster than the other three control strategies. Results of the Friedman test indicated that the differences in performances between the proposed MARL and other strategies were statistically significant regardless of the demand level. The MFD in the testbed network controlled by the proposed MARL was different from that controlled by the pretimed strategy, especially the MFD scatter plot. It provides insights on considering the traffic flow theory of the network when applying MARL to traffic control strategies. [ABSTRACT FROM AUTHOR]

With rapid development of the urbanization, how to improve the traffic lights efficiency has become an urgent issue. The traditional traffic light control is a method that calculates a series of corresponding timing parameters by optimizing the cycle length. However, fixing sequence and duration of traffic lights is inefficient for dynamic traffic flow regulation. In order to solve the above problem, this study proposes a traffic light timing optimization scheme based on deep reinforcement learning (DRL). In this scheme, the traffic lights can output an appropriate phase according to the traffic flow state of each direction at the intersection and dynamically adjust the phase length. Specifically, we first adopt Proximal Policy Optimization (PPO) to improve the convergence speed of the model. Then, we elaborate the design of state, action, and reward, with the vehicle state defined by Discrete Traffic State Encoding (DTSE) method. Finally, we conduct experiments on real traffic data via the traffic simulation platform SUMO. The results show that, compared to the traditional timing control, the proposed scheme can effectively reduce the waiting time of vehicles and queue length in various traffic flow modes. [ABSTRACT FROM AUTHOR]

The driving behavior in highway tunnels is more complicated than that in regular roadbed sections because the former is usually affected by black and white hole effects, tunnel clearance, and bad illumination. Unfortunately, the current Chinese criteria and the Uniform Traffic Control Equipment Manual (MUTCD) 2009 guidelines provide no clear method for setting exit advance guide signs in highway tunnels. Hence, a driving simulator-based experiment was conducted in the current study to analyze the effects of exit advance guide signs on the trajectory, speed, and acceleration of passenger cars in a highway tunnel under three different service levels. It was found that when the service level is first service level, second service level, and third service level, the setting of the exit advance guide signs made the initial transverse location of the vehicle from the tunnel exit advance by 13.39%, 21.20%, and 5.73%, the lane change distance is shortened by 6.34%, 20.18%, and 15.34%, the average speed is decreased by 1.44%, 2.40%, and 0.08%, and the acceleration is decreased to −0.10 m·s−2, −0.11 m·s−2, and −0.06 m·s−2. Thus, the exit guide signs in the tunnel played a certain optimization role in improving the traffic flow state of the section and reducing the traffic accident rate. [ABSTRACT FROM AUTHOR]

Traffic signal optimization is a significant means for smoothing urban traffic flow. However, the operation of traffic signals is currently seriously constrained by the data available from traditional point detectors. In recent years, an emerging technology, connected vehicle (CV), which can percept the overall traffic environment in real time, has drawn researchers' attention. With the new data source, traffic controllers should be able to make smarter decisions. A lot of work has been done to develop a new traffic signal control pattern under connected-vehicle environment. This paper provides a comprehensive review of these studies, aiming at sketching out the state of the arts in this research field. Several basic control problems, communication, control input, and objectives, are briefly introduced. The commonly used optimization models for this problem are summarized into three types: rule-based models, mathematical programming-based models, and artificial intelligence-based models. Then some major technical issues are discussed in detail. Finally, we raise the limitation of the existing studies and give our perspectives of the future research directions. [ABSTRACT FROM AUTHOR]

With the development of emerging intelligent traffic signal (I-SIG) system, congestion-involved security issues are drawing attentions of researchers and developers on the vulnerability introduced by connected vehicle technology, which empowers vehicles to communicate with the surrounding environment such as road-side infrastructure and traffic control units. A congestion attack to the controlled optimization of phases algorithm (COP) of I-SIG is recently revealed. Unfortunately, such analysis still lacks a timely visualized prediction on later congestion when launching an initial attack. In this paper, we argue that traffic image feature-based learning has available knowledge to reflect the relation between attack and caused congestion and propose a novel analysis framework based on cycle generative adversarial network (CycleGAN). Based on phase order, we first extract four-direction road images of one intersection and perform phase-based composition for generating new sample image of training. We then design a weighted L1 regularization loss that considers both last-vehicle attack and first-vehicle attack, to improve the training of CycleGAN with two generators and two discriminators. Experiments on simulated traffic flow data from VISSIM platform show the effectiveness of our approach. [ABSTRACT FROM AUTHOR]

With the rapid development of the subway, more and more people choose it as the main method of transportation. However, practically, the large number of pedestrians near some large metro stations can also correspondingly affect the traffic of motor vehicles on the roads adjacent to the stations. In this study, coordinated control of the traffic signal which considers the pedestrian crossing delay is studied based on this background. Firstly, the model of progression band in adjacent intersections is analyzed comprehensively, and the calculation formulas of progression bandwidth and the delay of vehicles which are from the progression of traffic flow under different conditions are given. Secondly, five different models of pedestrian delay are analyzed. Under different conditions of motor vehicle and pedestrian traffic flow, the Vissim fitting and proofreading are carried out and the optimal models under different conditions are obtained. Finally, the bilevel programming problem which fuses the above two models is determined; by coding an algorithm, it can be resolved. Furthermore, taking eight signalized intersections from Jiming Temple to Daxinggong along Nanjing Metro Line 3 as the actual background, the calculation and optimization of coordinated control are carried out. It is found that at the expense of the traffic efficiency of large intersections to a certain extent, a wider progression band can be formulated on the roads between them, and pedestrian delays can be reduced in general. [ABSTRACT FROM AUTHOR]

Sustainable management of traffic flows at signalized intersections is an important issue in terms of traffic engineering. The minimization of lost time, emission, fuel consumption, etc., can be achieved by optimization-based intersection management. In this study, a new traffic signal control model is developed for the management of three-leg signalized intersections. In the proposed model, signal timing and signal phasing are optimized simultaneously using Differential Evolution (DE) algorithm which is one of the population-based metaheuristic algorithms. The effectiveness of the model is tested on sample traffic scenarios with VISSIM simulation software considering average vehicle delay performance criteria. Results show that the proposed approach may reduce the average vehicle delay between the rates of 28%–42% and 3%–38% comparing to the optimum fixed-time signal control and vehicle-actuated signal control for tested scenarios, respectively. [ABSTRACT FROM AUTHOR]

To determine the control strategy at intersections adjacent to the expressway on-ramp, a route identification method based on empirical mode decomposition (EMD) and dynamic time warping (DTW) is established. First, the de-noise function of EMD method is applied to eliminate disturbances and extract features and trends of traffic data. Then, DTW is used to measure the similarity of traffic volume time series between intersection approaches and expressway on-ramp. Next, a three-dimensional feature vector is built for every intersection approach traffic flow, including DTW distance, space distance between on-ramp and intersection approach, and intersection traffic volume. Fuzzy C-means clustering method is employed to cluster intersection approaches into classifications and identify critical routes carrying the most traffic to the on-ramp. The traffic data are collected by inductive loops at Xujiahui on-ramp of North and South Viaduct Expressway and surrounding intersections in Shanghai, China. The result shows that the proposed method can achieve route classification among intersections for different time periods in one day, and the clustering result is significantly influenced by three dimensions of traffic flow feature vector. As an illustrative example, micro-simulation models are built with different control strategies. The simulation shows that the coordinated control of critical routes identified by the proposed method has a better performance than coordinated control of arterial roads. Conclusions demonstrated that the proposed route identification method could provide a theoretical basis for the coordinated control of traffic signals among intersections and on-ramp. [ABSTRACT FROM AUTHOR]

In this paper, we propose STCM, a context-aware secure traffic control model to manage competing traffic flows at a given intersection by using secure messages with real-time traffic information. The vehicle is modeled as a virtual sensor which reports the traffic state, such as its speed and location, to a traffic light controller through a secure and computationally lightweight protocol. During the reporting process, a vehicle’s identity and location are kept anonymous to any other vehicle in the system. At an intersection, the traffic light controller receives the messages with traffic information, verifies the identities of the vehicles, and dynamically implements and optimizes the traffic light phases in real-time. Moreover, the system is able to detect the presence of emergency vehicles (such as ambulances and fire fighting trucks) in the communication range and prioritize the intersection crossing of such vehicles to in order to minimize their waiting times. The simulation results demonstrate that the system significantly reduces the waiting time of the vehicles in both light and heavy traffic flows compared to the pretimed signal control and the adaptive Webster’s method. Simulation results also yield effective robustness against impersonating attacks from malicious vehicles. [ABSTRACT FROM AUTHOR]

Urban road networks may benefit from left turn prohibition at signalized intersections regarding capacity, for particular traffic demand patterns. The objective of this paper is to propose a method for minimizing the total travel time by prohibiting left turns at intersections. With the flows obtained from the stochastic user equilibrium model, we were able to derive the stage generation, stage sequence, cycle length, and the green durations using a stage-based method which can handle the case that stages are sharing movements. The final output is a list of the prohibited left turns in the network and a new signal timing plan for every intersection. The optimal list of prohibited left turns was found using a genetic algorithm, and a combination of several algorithms was employed for the signal timing plan. The results show that left turn prohibition may lead to travel time reduction. Therefore, when designing a signal timing plan, left turn prohibition should be considered on a par with other left turn treatment options. [ABSTRACT FROM AUTHOR]

To evaluate traffic conditions in an urban region, the average travel speed in the street network and the average traffic flow per lane are selected as indexes. The results for identifying traffic conditions are obtained using macroscopic fundamental diagram. Because of the difficulty of collecting the traffic parameter of travel speed from widely distributed fixed detectors directly, in this paper, the relationship between average travel speed and queue lengths at signalized intersections within the urban area is established based on an equivalent assumption. Finally, the average travel speed estimation model proposed in this paper is tested with microscopic simulation platform, and the results showed that the average travel speed estimation model performed well with satisfactory accuracy. In addition, the best performance of the network efficiency can be identified based on the reflections of macroscopic fundamental diagram, and the evaluation system is simple enough for application in engineering. Therefore, the result is instructive both for generating traffic control strategies and for making route choices. [ABSTRACT FROM AUTHOR]

Traffic problems often occur due to the traffic demands by the outnumbered vehicles on road. Maximizing traffic flow and minimizing the average waiting time are the goals of intelligent traffic control. Each junction wants to get larger traffic flow. During the course, junctions form a policy of coordination as well as constraints for adjacent junctions to maximize their own interests. A good traffic signal timing policy is helpful to solve the problem. However, as there are so many factors that can affect the traffic control model, it is difficult to find the optimal solution. The disability of traffic light controllers to learn from past experiences caused them to be unable to adaptively fit dynamic changes of traffic flow. Considering dynamic characteristics of the actual traffic environment, reinforcement learning algorithm based traffic control approach can be applied to get optimal scheduling policy.The proposed Sarsa(λ)-based real-time traffic control optimizationmodel canmaintain the traffic signal timing policymore effectively. The Sarsa(λ)-based model gains traffic cost of the vehicle, which considers delay time, the number of waiting vehicles, and the integrated saturation from its experiences to learn and determine the optimal actions. The experiment results show an inspiring improvement in traffic control, indicating the proposed model is capable of facilitating real-time dynamic traffic control. [ABSTRACT FROM AUTHOR]

Large scale traffic congestion often stems from local traffic jam in single road or intersection. In this paper, macroscopic method was used to explore the formation and propagation of local traffic jam. It is found that (1) the propagation of traffic jam can be seen as the propagation of traffic signal parameters, that is, virtual split and virtual green time; (2) for a road with endogenous flow, entrance location influences the jam propagation. With the same demand (upstream links flow and entrance flow), the upstream got more influence; (3) when a one-lane road is thoroughly congested, virtual signal parameters everywhere are the same as that at stop line; for a basic road, the virtual signals work in a cooperative manner; (4) phase sequence is one important parameter that influences traffic performances during peak hour where spill back of channelization takes place. The same phase plan for left-turn flow and through flow would be preferred; (5) signal coordination plays an important role in traffic jam propagation and hence effective network signal parameters should be designed to prevent jam from propagation to the whole network. These findings would serve as a basis for future network traffic congestion control. [ABSTRACT FROM AUTHOR]

The frequent occurrence of the city emergency leads to rapid development of emergency traffic management which is an important part in the Emergency Rescue System. In the intersection with heavy traffic, the emergency rescue vehicles often with increased delay, reduced safety, and sometimes even with a collision, which restrict the efficiency of the rescue. This paper established the intersection signal control optimization model based on detail analysis of emergency rescue vehicles traffic characteristics and traffic signal control. The models, on one hand, were able to guarantee the emergency vehicles through the intersection quickly and without delay; on the other hand, could ensure the minimum impact to other vehicles in the process of the emergency vehicles through the intersection. Finally, the model's practicality was verified by real cases. [ABSTRACT FROM AUTHOR]

A key problem in traffic engineering is the optimization of the flow of vehicles through urban intersections by improving the timing policy of traffic signals. Current methods of signal control policy are based on the junction topography and prespecified static traffic volumes. However, the actual daily traffic volumes can be affected by many time-dependent factors making a static policy hardly optimal. In this paper, we induce nonstationary predictive models of traffic flow by applying novel methods of time-series data mining to the traffic sensors data collected from a signalized intersection in Jerusalem over a period of 3 years. Our methodology for modeling dynamic traffic volumes combines clustering and segmentation algorithms. The results of a case study based on real-world traffic data demonstrate that a dynamic signal policy using the data mining approach can produce a decrease of about 33.7% in the total waiting time of drivers during 1 year, in comparison to the existing static traffic policy. The resulting savings for this junction only would be about 13,800 driving hours, which are worth of about $52,000 per annum in terms of Israeli economy. © 2011 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]