Search

Expansive clayey soils (CSs) expand and become softer as moisture content increases, but they get harder and stronger as they dry out. The earth's swelling and shrinkage characteristics under varying moisture conditions make roads built on expansive CS, in particular, vulnerable to early degradation. In this investigation, coffee husk ash (CHA), gypsum, and a blend of the two additives (G-CHA) were used in experimental tests to treat expansive CS. This study aims to evaluate experimentally the potential of expansive soil stabilization using different additives: CHA, gypsum, and a combination of gypsum and CHA. Five different percentages of CHA (5%, 10%, 15%, 20%, and 25%), three percentages of gypsum (3%, 6%, and 9%), and variable percentages of their combinations were used to stabilize the soil for pavement subgrade application. Atterberg limits, compaction, linear shrinkage (LS), swelling, unconfined compressive strength (UCS), and California bearing ratio (CBR) tests were performed on treated and virgin soil specimens at 3, 7, 14, 28, and 56-day curing times. Results showed that CHA additives effectively reduced the plasticity, LS, and swell potential in addition to increasing the maximum dry unit weight, UCS, and CBR. It was determined that the UCS and CBR values for the 6% stabilized gypsum soil increased by 28.95% and 19.54%, respectively, and reduced by 41% of the plastic index parameter after the addition of 15% CHA. Based on the evaluation of the results, an optimum mixture of 6% gypsum and 15% CHA (SG6C15) stabilized soil can be used in pavement subgrade applications as it achieved the minimum strength target. The performance of CHA-treated samples as subgrade material is superior to that of untreated virgin soil. Because of the stronger subgrade, smaller pavement layers result in a thinner pavement structure. [ABSTRACT FROM AUTHOR]

The utilization of fly ash (FA) and powdered granulated steel slag (PGSS) as additives in soil stabilization plays a crucial role in environmental, economic, and weak soil property improving advantages. In this study, the combined effect of FA and PGSS in improving expansive subgrade soil was investigated. The materials used for this study were expansive soils, FA, and PGSS. The study has applied an experimental research method. For this investigation, the index properties, Free Swell Index (FSI), unconfined compressive strength (UCS), optimum moisture content (OMC), California bearing ratio (CBR), and scanning electron microscope (SEM) tests were done for treated and untreated expansive soils. The findings indicated that as the mixture of FA (0 to 12.5% at 5% increment) and PGSS (0 to 25% at 5% at 2.5% increment) is added to the untreated expansive soils, the index properties, FSI, and OMC of the soils were significantly declined. The CBR values of expansive soils containing 20% FA and 10% PGSS mixture were 13.8% and 16.21%, respectively, which improved the quality of the soils by 85.43% and 84.82%, respectively. While the untreated expansive soils have a UCS value of 0.34 kg/cm2, the treated soil comprising 20% FA and 10% PGSS mixture has a UCS value of 13.42 kg/cm2, indicating that the soil strength is enhanced by 97.47%. The results of the studies demonstrate that adding FA and PGSS to expansive soil improves its stability and strength. The study concluded that disposals such as FA and PGSS might be effectively used in enhancing the characteristics of construction materials and used for the construction. [ABSTRACT FROM AUTHOR]

Oil pollution causes deterioration of the physical, chemical, mechanical, and geotechnical characteristics of affected soil leading to loss of soil productivity for engineering purposes. Different stabilization methods serve as a remedy for such soil to regain its loss engineering properties. This study was concerned with the utilization of lime to stabilize crude oil contaminated soil and to investigate its efficacy for soil stabilization. The study also focused on determining the geotechnical properties of crude oil contamination and matching the result with standard specifications established for engineering works. Hydrated lime, expansive clayey soil, contaminated soil, and potable water were the materials used for the experimental investigation. The contaminated soil was treated with 6.5% lime and 0–20% crude oil contaminated materials obtained from oil exploration sites in North-Eastern Nigeria and per standard test method for laboratory evaluation of consistency limits, compaction properties, California bearing ratio (CBR), and microstructural and mineralogical assessments. The experimental results obtained were further tested statistically through one-way ANOVA and F-statistics to establish the source of variation for the geotechnical properties, while multiple linear regression and correlation statistics helped draw the connection between the consistency limits, compaction, and CBR properties of the soil-lime-COCM blend. Results indicated a coefficient of determination of 99.86. The contaminated soil materials were found to show optimal performance at a 5% ratio and 6.5% of lime for civil construction purposes. [ABSTRACT FROM AUTHOR]

The marble process industry from Shaq Al-Thouban region, which is located in East Cairo, Egypt, produces a huge amount of marble wastes every day during the cutting and processing stages. Up to now, most of these wastes are dumping on open land which creates serious environmental problems. The amount of waste marble from the processing stage is about 20 to 25% of the total processed stone. Egypt also suffers from the problem of expansive soil that occupies a large area of its lands, especially in the new cities that are built on these lands. The primary purpose of this study is to use this waste material in the soil stabilization in point of view utilization of this waste as local low-cost materials and elimination of their negative environmental impacts. The waste marble dust was mixed with expansive soil samples with various percentages of 5%, 10%, 15%, 20%, and 25% by dry weight of soil. Different tests including Atterberg's limits, standard Proctor compaction, unconfined compressive strength (UCS), California bearing ratio (CBR), swelling percentage, linear shrinkage (LS) tests, and XRF and XRD analyses were conducted for natural and marble dust stabilized soils. The soil mixtures used for UCS, CBR, and swell tests were compacted at the optimum moisture content (OMC) and maximum dry density (MDD) using the standard Proctor compaction method and cured for 7 days. The results of the tests showed that there are significant effects in enhancing the properties of expansive soils. Also, the results showed that as the percentage of the marble dust increases the plasticity index, the swelling potential of the expansive clayey soil decreases. Furthermore, the optimum moisture content decreases, and the maximum dry density increases. Also, UCS, CBR, and the calcite content of the soil mixtures increase with the increase in marble dust content. [ABSTRACT FROM AUTHOR]

Problematic soil stabilization processes involve the application of binders to improve the engineering properties of the soil. This is done to change the undesirable properties of these soils to meet basic design standards. However, very little attention has been given to the reactive phase of soil stabilization. This phase is the most important in every stabilization protocol because it embodies the reactions that lead to the bonding of the dispersed particles of clayey soil. Hence, this reactive phase is reviewed. When clayey soils which make up the greatest fraction of expansive soil come in contact with moisture, they experience volume changes due to adsorbed moisture that forms films of double diffused layer on the particles. When this happens, the clayey particles disperse and float, increasing the pore spaces or voids that exist in the soil mass. Stabilizations of these soils are conducted to close the gaps between the dispersed clayey soil particles. This is achieved by mixing additives that will release calcium, aluminum, silicon, etc., in the presence of adsorbed moisture, and a hydration reaction occurs. This is followed by the displacement reaction based on the metallic order in the electrochemical series. This causes a calcination reaction, a process whereby calcium displaces the hydrogen ions of the dipole adsorbed moisture and displaces the sodium ion responsible for the swelling potential of clayey soils. These whole processes lead to a pozzolanic reaction, which finally forms calcium alumina-silica hydrate. This formation is responsible for soil stabilization. [ABSTRACT FROM AUTHOR]

Volume change in expansive soils is a problem encountered in earth work around the world. This is prominent with hydraulically bound structures or foundations subjected to prolonged moisture exposure. This behavior of clayey used as subgrade, foundation, landfill, or backfill materials causes undesirable structural functionality and failures. To prevent this happening, clayey soils are studied for possible volume change potential and degree of expansion. Consequently, the problematic soils are stabilized. In this work, the stabilization of clayey highly expansive soil classified as A-7-6 soil and highly plastic with high clay content was conducted under laboratory conditions. The treatment exercise was experimented using quicklime-activated rice husk ash (QARHA), hydrated lime-activated rice husk ash (HARHA), and calcite-activated rice husk ash (CARHA) at the rates of 1%, 2%, 3%, 4%, 5%, 6%, 7%, 8%, 9%, and 10%. Upon treatment with the three calcium compounds to produce three sets of treated experimental specimens, the plasticity index was observed and recorded and swelling potentials were evaluated using the plasticity index method (PIM). The results showed a consistent improvement on the properties of the treated soil with the addition of the different activated admixtures. While the utilization of CARHA and HARHA improved the clayey soil to medium expansive soil, the treated clayey soil substantially improved from highly expansive soil with a potential of 23.35% to less expansive with a final potential of 0.59% upon the addition of 10% QARHA. Finally, QARHA was adjudged as the best binding composite due to the highest rate of reduction recorded with its utilization. [ABSTRACT FROM AUTHOR]