Search

Leach (low energy adaptive clustering hierarchy) algorithm is a self-clustering topology algorithm. Its execution process is cyclical. Each cycle is divided into two phases: cluster building phase and stable data communication phase. In the stage of cluster building, the adjacent nodes cluster dynamically and randomly generate cluster heads. In the data communication phase, the nodes in the cluster send the data to the cluster head, and the cluster head performs data fusion and sends the results to the aggregation node. Because the cluster head needs to complete data fusion, communication with the convergence node and other works, the energy consumption is large. Leach algorithm can ensure that each node acts as cluster head with equal probability, so that the nodes in the network consume energy relatively evenly. The basic idea of Leach algorithm is to randomly select cluster head nodes in a circular way. It evenly distributes the energy load of the whole network to each sensor node in the network. It can reduce network energy consumption and improve network life cycle. Leach repeatedly performs cluster refactoring during its operation. This paper studies the parameter detection of wireless sensor network based on Leach algorithm on the on-chip embedded debugging system. Because the classical low-power adaptive clustering layered protocol (Leach) has the problem of energy imbalance and short node life cycle, this paper uses embedded debugging technology based on Leach algorithm and the residual energy and position of nodes in wireless sensor networks were tested for research. This Leach algorithm uses the concept of wheel. Each round consists of two phases: initialization and stabilization. In the initialization stage, each node generates a random number between 0 and 1. If the random number generated by a node is less than the set threshold T (n), the node publishes a message that it is a cluster head. Through the research on the parameter detection, the simulation results show that the research in this paper has good feasibility and rationality. [ABSTRACT FROM AUTHOR]

We propose an underwater CSMA/CA protocol with multi-RTS and multi-DATA receptions using the long underwater propagation delay. We analyze the throughput and delay of the proposed underwater CSMA/CA protocol through a ring-based underwater network modeling. The proposed protocol does not need to maintain the information of internode propagation delay for each pair of underwater nodes. In the proposed protocol, when there are simultaneous transmissions of RTS frames from different underwater sensors to an underwater sink as their back-off counters reach zero, the sink can recover some RTS frames which are not overlapped at the sink in the time domain due to the long underwater propagation delay. Then, the sink transmits CTS frame containing the DATA transmission order and the IDs of the sensors which transmitted the recovered RTS frames. Sensors which correspond to the IDs contained by the CTS frame can transmit DATA frame to the sink according to the DATA transmission order. We evaluate the throughput and delay performance of the proposed protocol with varying the number of sensors and the contention window size compared to the conventional protocols. The analytical results agree with the simulation results well for the proposed protocol with various numbers of sensors and contention window sizes. The analytical and simulation results show that the proposed protocol outperforms the conventional protocols. [ABSTRACT FROM AUTHOR]

Traditional wireless sensor networks (WSNs) work over the unlicensed spectrum, and as the spectrum becomes increasingly crowded, they suffer from uncontrolled interference. Recently, cognitive radio based sensor networks (CRSNs) have been envisioned as a promising type of implementation that provides quality-of-service (QoS) features for data transmissions. However, key challenges remain in designing energy-efficient medium access control techniques that can achieve QoS. In this paper, we have developed a multiconstrained QoS aware MAC protocol, MQ-MAC, for a cluster based CRSN. In MQ-MAC, a data channel and a backup channel are assigned to a secondary user by the respective cluster head by using dynamic channel priorities. The user device can switch to the backup channel when a primary user appears to be operating over the data channel. Member nodes of a cluster are also prioritized with respect to the urgency of their generated data packets. Performance evaluations, carried out in NS-3 simulator, show that the proposed MQ-MAC protocol offers better performance than existing MAC protocols for CRSN. [ABSTRACT FROM AUTHOR]

There have been increasing demands for research into multi-channel-based wireless sensor network protocols and applications to support requirements such as increased throughput and real-time or reliable transmission. Researchers or developers of these protocols and applications have to simultaneously analyze the exchanged packets for correctness of both their contents and message exchange timelines. However, if developers were to use multiple conventional single-channel packet sniffers for this purpose, debugging during development and the verification process becomes extremely tedious and difficult because of the need to check the correctness of the protocols over multiple channels individually. Therefore, we present a multi-channel packet-analysis system (MPAS) that helps in debugging and verification for multi-channel protocols or applications. Wireless packets are detected and timestamped by each sniffer module in the MPAS for each channel, and packets are preprocessed and transmitted to a GUI-based analyzer, which then parses the received packets and shows them in order. We present the design and implementation results of the MPAS and evaluate its performance by comparing it against a widely used packet sniffer. [ABSTRACT FROM AUTHOR]

This paper proposes a new virtual interaction based programmable logic controller (PLC) training system using virtual sensors and actuators. The proposed system is composed of four components including virtual sensors (for interacting between user and input devices), virtual actuators (for manipulating and controlling device or equipment), virtual PLC (for programming and generating command), and virtual networks (for interfacing the interactions and transferring the data between all the components). The proposed system is applied to a real training program of the university's training center to examine the applicability and feasibility, and the results are analyzed and discussed. [ABSTRACT FROM AUTHOR]

In underwater acoustic sensor networks (UASNs), the propagation delay of acoustic signals is much longer than Radio Frequency (RF). There is spatial unfairness problem caused by space-time uncertainty. Hence, the design of Medium Access Control (MAC) is a challenging issue. In underwater, it not only considers transmission time but also takes location into account. In this paper, we propose Response to the Earliest Transmitter of RTS MAC (RET-MAC) protocol to solve the problem. RET-MAC adopts adaptive RTS Contention Phase (RTS CP) to determine the earliest transmitter of RTS. And CTS Delay Phase (CTS DP) is added to postpone sending CTS in order to avoid collision. In addition, we propose CTS back-off mechanism to adjust the length of CTS DP as needed. Contention back-off mechanism is used to reduce network congestion and increase fairness further. The simulation results show that our scheme can achieve higher fairness and throughput; at the same time it also guarantees lower energy consumption and delay. [ABSTRACT FROM AUTHOR]

Mobile sensor networks (MSNs) are widely used in various domains to monitor, record, compute, and interact the information within an environment. To prolong the life time of each node in MSNs, energy model and conservation should be considered carefully when designing the data communication mechanism in the network. The limited battery volume and high workload on channels worsen the life times of the busy nodes. In this paper, we propose a new energy evaluating methodology of packet transmissions in MSNs, which is based on redividing network layers and describing the synchronous data flow with matrix form. We first introduce the cache coherence layer to the protocol stack of MSNs. Then, we use a set of energy probability matrices to describe and calculate the energy consumption of each state in the protocol. After that, based on our energy model, we will give out an energy evaluating method of the MSNs design, which is suitable for measuring and comparing the energy consumption from different implements of hardware/software. Our experimental results show that our approach achieves a precision with less than 2% error and provides a credible quantitative criterion for energy optimization of data communication in MSNs. [ABSTRACT FROM AUTHOR]

In order to achieve the equal usage of limited resources in the wireless sensor networks (WSNs), we must aggregate the sensor data before passing it to the base station. In WSNs, the aggregator nodes perform a data aggregation process. Careful selection of the aggregator nodes in the data aggregation process results in reducing large amounts of communication traffic in the WSNs. However, network conditions change frequently due to sharing of resources, computation load, and congestion on network nodes and links, which makes the selection of the aggregator nodes difficult. In this paper, we study an aggregator node selection method in the WSNs. We formulate the selection process as a top-k query problem, where we efficiently solve the problem by using a modified Sort-Filter-Skyline (SFS) algorithm. The main idea of our approach is to immediately perform a skyline query on the sensor nodes in the WSNs, which enables to extract a set of sensor nodes that are potential candidates to become an aggregator node. The experiments show that our method is several times faster compared to the existing approaches. [ABSTRACT FROM AUTHOR]

We suggest an enhanced approach for reliable bulk data transmission of image files, multimedia video files, and successive log files for monitoring systems over wireless sensor networks. Recently, some approaches have been proposed that use multiple blocks in a frame. These approaches simply drop the block that contains the error and the error-free blocks are transmitted to other nodes. This paper proposes an enhanced FEC scheme, called M-FEC, which reduces the overhead and the total number of transmissions. M-FEC fragments bulk data into many small blocks and these blocks are encoded using rateless codes. Only the erroneous blocks that are detected in a frame are dropped and a relay node waits for other incoming blocks in order to construct a full-sized frame. This simple approach can improve the performance of the FEC scheme over WSNs. Our experiments show that M-FEC reduces the number of received frames at the sink node by almost half compared to the previous approach. We compared our results for different degrees of Wi-Fi interference by choosing particular IEEE 802.15.4 channels and running our experiments for three different types of Wi-Fi interference. [ABSTRACT FROM AUTHOR]

ICWASNs are a kind of wireless networks where, due to mobility of nodes and lack of connectivity, there may be frequent disconnections among the nodes. Hence, the routing path from the source to destination will not be available always. It is proven that, in these networks, messages are replicated multiple times in order to withstand the maximum delay and to achieve high throughput. But these multiple replication-based protocols result in an increase in network overhead and high resource consumption because of uncontrolled replication. Previous works in ICWASNs assume that networks will always have multiple partitions, and each message will be routed using store and forward mechanism. If source and destination are connected, then it is not needed to replicate multiple copies and waste the resources. We introduce a new simple scheme which applies single-copy routing if destination is available; else it switches to store and forward routing. The proposed system tries to reduce the average number of message replications while increasing the throughput. [ABSTRACT FROM AUTHOR]

Energy savings have always been the primary concern in wireless sensor network protocols, however there are applications where latency and throughput are prioritized over energy efficiency and are so significant that the application would not be able to satisfy its requirements without them. The communication unit and the antenna operation consume most of the battery-powered energy of the node. Thus, the access to the medium must be controlled in a very strict manner in order to avoid collisions which result in lost transmissions and have a dramatic impact on the lifetime of the network. Although existing duty cycle MAC protocols are power efficient, they introduce significant end-to-end delivery latency and provide poor throughput. In this paper, we propose SN-MAC, a CDMA-based power controlled medium access protocol that uses both transmitter-based and receiver-based CDMA inside a formed cluster, and uses a TDMA schedule to make the cluster heads communicate with the base station. Our algorithm targets latency and throughput needs in addition to its ability to increase the overall network lifetime. We provide a head-to-head comparison with other protocols through extensive simulations focusing on the performance in terms of latency, throughput, and energy consumption. [ABSTRACT FROM AUTHOR]

A novel adaptive source-channel coding with feedback for progressive transmission of medical images is proposed here. In the source coding part, the transmission starts from the region of interest (RoI). The parity length in the channel code varies with respect to both the proximity of the image subblock to the RoI and the channel noise, which is iteratively estimated in the receiver. The overall transmitted data can be controlled by the user (clinician). In the case ofmedical data transmission, it is vital to keep the distortion level under control as inmost of the cases certain clinically important regions have to be transmitted without any visible error. The proposed system significantly reduces the transmission time and error. Moreover, the system is very user friendly since the selection of the RoI, its size, overall code rate, and a number of test features such as noise level can be set by the users in both ends. A MATLAB-based TCP/IP connection has been established to demonstrate the proposed interactive and adaptive progressive transmission system. The proposed system is simulated for both binary symmetric channel (BSC) and Rayleigh channel. The experimental results verify the effectiveness of the design. [ABSTRACT FROM AUTHOR]

With the development of modern communication, available spectrum resources are becoming increasingly scarce, which reduce network throughput. Moreover, the mobility of nodes results in the changes of network topological structure. Hence, a considerable amount of control information is consumed, which causes a corresponding increase in network power consumption and exerts a substantial impact on network lifetime. To solve the real-time transmission problem in large-scale wireless mobile sensor networks, opportunistic spectrum access is applied to adjust the transmission power of sensor nodes and the transmission velocity of data. A cognitive routing and optimization protocol based on multiple channels with a cross-layer design is proposed to study joint optimal cognitive routing with maximizing network throughput and network lifetime. Experimental results show that the cognitive routing and optimization protocol based on multiple channels achieves low computational complexity, which maximizes network throughput and network lifetime. This protocol can be also effectively applied to large-scale wireless mobile sensor networks. [ABSTRACT FROM AUTHOR]

In designing a real-time MAC protocol for wireless sensor networks, it is desirable to shorten the data acquisition cycle time to satisfy more applications with a tighter time constraint in data collection. To achieve this, one often tries to improve throughput by employing a slot reuse technique. Meanwhile, the slotted sense multiple access protocol that uses a sharable slot was proven to be advantageous for timely and reliable data delivery. However, since the nodes at lower tree levels process more packets or bigger packets with data aggregation, they need a bigger sharable slot. Thus, it is not easy to employ a slot reuse technique due to the size variation of sharable slots. To tackle this problem, we try to reduce the size of an aggregated packet by limiting the number of packets for aggregation using two channels. If every node is allowed to send a single packet during data acquisition cycle time, an equal-sized sharable slot can be allocated to every tree level. It is shown that the proposed approach can reduce data acquisition cycle time significantly while maintaining good reliability in data transmission compared with slotted sense multiple access and also reduce energy consumption greatly compared with another multi-channel MAC protocol. [ABSTRACT FROM AUTHOR]

Flying ad hoc network is widely used in many military and civilian scenarios. Compared with mobile ad hoc network and vehicular ad hoc network, flying ad hoc network holds some special characteristics such as high mobility, long-distance communication, and sparse node-deployment, which cause an important challenge in the design of routing protocols. In this article, a velocity-aware and stability-estimation–based multi-path routing protocol is proposed for flying ad hoc network. The protocol is mainly composed of two important parts, which are the routing discovery mechanism and routing maintenance mechanism. In routing discovery process, the routing discovery request packet only can be forwarded by the reliable node, which is decided by the calculation of co-direction degree, then the routing overhead is reduced at some extent. Noticeably, the correlation of the survival duration between adjacent links is fully considered, which is very important to the path stability criteria. In routing maintenance progress, a path similarity and path remaining survival duration–based multi-path selection mechanism is proposed. The performance superiority of velocity-aware and stability-estimation–based multi-path routing protocol is also demonstrated by extensive simulations. The results show that velocity-aware and stability-estimation–based multi-path routing protocol is much better than other existing protocols in terms of network throughput, average delay of data transmission, routing overhead, and the convergence time of the routing discovery. [ABSTRACT FROM AUTHOR]

A lot of facts show that many researches just place emphasis on data aggregation or data fusion, which is not beneficial to analyze the sensed data thoroughly and will lead to the aggregation results' not being used fully; worse yet, the actual networks are always existed with lossy links; many now available aggregation algorithms are based on ideal network models and not any further analysis and fusion about aggregation results are done. Thus, we propose the concept of data fusaggregation so as to support processing sensed data while transmitting in large-scale probabilistic wireless sensor networks and propose a reliability-oriented data fusaggregation algorithm (RODFA) to assist users to get the monitoring information from the monitored geographic environment and measure the reliability of the information they get. RODFA also facilitates network administrator to improve the system sensing performance for large-scale probabilistic WSNs. In RODFA, the parameter η, which could reflect the reliability of aggregation result intuitively, is defined and calculated and it plays an important part in helping users to process aggregation result further. In our experiment, the validity of RODFA is verified by our simulation results, and the influence of network sizes and network performances on data fusaggregation is analyzed. [ABSTRACT FROM AUTHOR]

In receiver-initiated medium access control (MAC) protocols for wireless sensor networks, communication is initiated by the receiver node which transmits beacons indicating its availability to receive data. In the case of multiple senders having traffic for a given receiver, such beacons form points where collisions are likely to happen. In this paper, we present altruistic backoff (AB), a novel collision avoidance mechanism that aims to avoid collisions before the transmission of a beacon. As a result of an early backoff, senders spend less time in idle listening waiting for a beacon, thus saving significant amounts of energy. We present an implementation of AB for Texas Instruments' eZ430-rf2500 sensor nodes and we evaluate its performance with simulations and experiments. [ABSTRACT FROM AUTHOR]

Wireless Sensor Networks (WSNs) provide a wireless network infrastructure for sensed data transport in environments where wired or satellite technologies cannot be used. Because the embedded hardware of the sensor nodes has been improved very much in the last years and the number of real deployments is increasing considerably, they have become a reliable option for the transmission of any type of sensed data, from few sensed measures to multimedia data. This paper proposes a new protocol that uses an ad hoc cluster based architecture which is able to adapt the logical sensor network topology to the delivered multimedia stream features, guaranteeing the quality of the communications. The proposed protocol uses the quality of service (QoS) parameters, such as bandwidth, delay, jitter, and packet loss, of each type of multimedia stream as a basis for the sensor clusters creation and organization inside the WSN, providing end-to-end QoS for each multimedia stream. We present real experiments that show the performance of the protocol for several video and audio cases when it is running. [ABSTRACT FROM AUTHOR]