Search

There have been increasing demands for research into multi-channel-based wireless sensor network protocols and applications to support requirements such as increased throughput and real-time or reliable transmission. Researchers or developers of these protocols and applications have to simultaneously analyze the exchanged packets for correctness of both their contents and message exchange timelines. However, if developers were to use multiple conventional single-channel packet sniffers for this purpose, debugging during development and the verification process becomes extremely tedious and difficult because of the need to check the correctness of the protocols over multiple channels individually. Therefore, we present a multi-channel packet-analysis system (MPAS) that helps in debugging and verification for multi-channel protocols or applications. Wireless packets are detected and timestamped by each sniffer module in the MPAS for each channel, and packets are preprocessed and transmitted to a GUI-based analyzer, which then parses the received packets and shows them in order. We present the design and implementation results of the MPAS and evaluate its performance by comparing it against a widely used packet sniffer. [ABSTRACT FROM AUTHOR]

If the battery of a node is drained out, then it cannot be communicated with other nodes and the number of dead-nodes makes the network partition. In order to overcome this problem, we propose a new routing algorithm for mobile ad hoc networks. It uses the residual battery capacity, transmission power, and hop-count to route the data packet. Here the proposed model has simulated with the help of 100 mobile nodes using the network simulator and has tested under various conditions. It compares with the ad hoc on-demand distance vector protocol, minimum total transmission power, and min-max battery cost routing models. The proposed model has shown better results in terms of node lifetime and network lifetime. The mobile nodes start to die at 400, 420, 440, 470, and 508 s for AODV, MTPR, MMBCR, CMMBCR, and proposed models, respectively. If the system has 145 J, then the AODV model transmits 38 000 of data packets, whereas the MTPR, MMBCR, CMMBCR, and proposed models will transmit 37 600, 47 240, 41 580, 42 700, and 42 955 of data packets, respectively. Copyright © 2009 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

In designing a real-time MAC protocol for wireless sensor networks, it is desirable to shorten the data acquisition cycle time to satisfy more applications with a tighter time constraint in data collection. To achieve this, one often tries to improve throughput by employing a slot reuse technique. Meanwhile, the slotted sense multiple access protocol that uses a sharable slot was proven to be advantageous for timely and reliable data delivery. However, since the nodes at lower tree levels process more packets or bigger packets with data aggregation, they need a bigger sharable slot. Thus, it is not easy to employ a slot reuse technique due to the size variation of sharable slots. To tackle this problem, we try to reduce the size of an aggregated packet by limiting the number of packets for aggregation using two channels. If every node is allowed to send a single packet during data acquisition cycle time, an equal-sized sharable slot can be allocated to every tree level. It is shown that the proposed approach can reduce data acquisition cycle time significantly while maintaining good reliability in data transmission compared with slotted sense multiple access and also reduce energy consumption greatly compared with another multi-channel MAC protocol. [ABSTRACT FROM AUTHOR]