Search

Lung disease is one of the most harmful diseases in traditional days and is the same nowadays. Early detection is one of the most crucial ways to prevent a human from developing these types of diseases. Many researchers are involved in finding various techniques for predicting the accuracy of the diseases. On the basis of the machine learning algorithm, it was not possible to predict the better accuracy when compared to the deep learning technique; this work has proposed enhanced artificial neural network approaches for the accuracy of lung diseases. Here, the discrete Fourier transform and the Burg auto-regression techniques are used for extracting the computed tomography (CT) scan images, and feature reduction takes place by using principle component analysis (PCA). This proposed work has used the 120 subjective datasets from public landmarks with and without lung diseases. The given dataset is trained by using an enhanced artificial neural network (ANN). The preprocessing techniques are handled by using a Gaussian filter; thus, our proposed approach provides enhanced classification accuracy. Finally, our proposed method is compared with the existing machine learning approach based on its accuracy. [ABSTRACT FROM AUTHOR]

Lung ultrasound has great application value in the differential diagnosis of pulmonary exudative lesions. It has good sensitivity and specificity for the diagnosis of various pulmonary diseases in neonates and children. It is believed that it can replace chest CT examination. It is routinely used for the diagnosis of pulmonary diseases in emergency critical care medicine. However, the interpretation of the impact of ultrasound on the human lungs relies heavily on experienced physicians, which greatly restricts the interpretation efficiency of the impact of ultrasound. In order to improve the efficiency of monitoring and interpretation of the impact of ultrasound, this paper proposes an intelligent detection algorithm for human lung clinical ultrasound images based on recurrent neural network. Transfer learning is used to replace the fully connected layer of the VGG16 model and improve the loss function, so that the same the Euclidean distance between category images can be reduced, and the Euclidean distance between different categories of images can be increased, enhancing the resolution of the entire model, thereby achieving better image feature extraction results. The experimental results show that the algorithm proposed in this paper can surpass the doctor's level in the identification of various lung diseases. [ABSTRACT FROM AUTHOR]

Temporomandibular joint ankylosis is an important entity that dentists and maxillofacial surgeons should know about. It clinically manifests through a permanent limitation of mandibular movements coupled with mouth opening inferior to 3 cm. This serious pathology can have serious functional repercussions, such as mastication problems, speech troubles, eating disorders, and jaw growth hindrance, in addition to the psychological difficulties in coping with such a condition in daily life. Herein, we present a radiological and chronological illustration of the evolution of temporomandibular joint ankylosis following an overlooked traumatic fracture of the mandibular condyle. The present case report involves an 8-year-old patient referred for a gradually evolving mouth opening limitation following a car accident. Tomodensitometry was helpful as it revealed an osseous block between the left temporomandibular joint surfaces, showing an ankylosis. Posttraumatic cerebral computed tomography scan was performed. It revealed an undetected fracture of the left condyle. The aim of this paper was to show how a traumatic ankylosis could have been avoided if enough attention was paid to the interpretation of immediate posttraumatic computed tomography scans. A thorough dental examination must be carried out once vital emergency is over. Early diagnosis of temporomandibular joint trauma is a crucial factor in preventing complications, such as ankylosis and its consequent oral dysfunctions. The dentist must automatically suspect condylar fracture when a child presents a history of head trauma, especially a mandibular trauma. This case should be a reminder that although temporomandibular joints are very often left out in patients' vital emergency first examination, temporomandibular joints/they are still a highly important structure which omission, and thus, dysfunction, if lesions are present, can lead to nonnegligible medico-legal consequences/that temporomandibular joints should be taken into account during patients' vital emergency first examination because if they are neglected, in the presence of lesions, they cause dysfunction, thus leading to nonnegligible medico-legal consequences. [ABSTRACT FROM AUTHOR]

Chronic rhinosinusitis (CRS) is a global disease characterized by poor treatment outcomes and high recurrence rates, significantly affecting patients' quality of life. Due to its complex pathophysiology and diverse clinical presentations, CRS is categorized into various subtypes to facilitate more precise diagnosis, treatment, and prognosis prediction. Among these, CRS with nasal polyps (CRSwNP) is further divided into eosinophilic CRSwNP (eCRSwNP) and noneosinophilic CRSwNP (non‐eCRSwNP). However, there is a lack of precise predictive diagnostic and treatment methods, making research into accurate diagnostic techniques for CRSwNP endotypes crucial for achieving precision medicine in CRSwNP. This paper proposes a method using multiangle sinus computed tomography (CT) images combined with artificial intelligence (AI) to predict CRSwNP endotypes, distinguishing between patients with eCRSwNP and non‐eCRSwNP. The considered dataset comprises 22,265 CT images from 192 CRSwNP patients, including 13,203 images from non‐eCRSwNP patients and 9,062 images from eCRSwNP patients. Test results from the network model demonstrate that multiangle images provide more useful information for the network, achieving an accuracy of 98.43%, precision of 98.1%, recall of 98.1%, specificity of 98.7%, and an AUC value of 0.984. Compared to the limited learning capacity of single‐channel neural networks, our proposed multichannel feature adaptive fusion model captures multiscale spatial features, enhancing the model's focus on crucial sinus information within the CT images to maximize detection accuracy. This deep learning‐based diagnostic model for CRSwNP endotypes offers excellent classification performance, providing a noninvasive method for accurately predicting CRSwNP endotypes before treatment and paving the way for precision medicine in the new era of CRSwNP. [ABSTRACT FROM AUTHOR]

The most common and aggressive tumor is brain malignancy, which has a short life span in the fourth grade of the disease. As a result, the medical plan may be a crucial step toward improving the well‐being of a patient. Both diagnosis and therapy are part of the medical plan. Brain tumors are commonly imaged with magnetic resonance imaging (MRI), positron emission tomography (PET), and computed tomography (CT). In this paper, multimodal fused imaging with classification and segmentation for brain tumors was proposed using the deep learning method. The MRI and CT brain tumor images of the same slices (308 slices of meningioma and sarcoma) are combined using three different types of pixel‐level fusion methods. The presence/absence of a tumor is classified using the proposed Tumnet technique, and the tumor area is found accordingly. In the other case, Tumnet is also applied for single‐modal MRI/CT (561 image slices) for classification. The proposed Tumnet was modeled with 5 convolutional layers, 3 pooling layers with ReLU activation function, and 3 fully connected layers. The first‐order statistical fusion metrics for an average method of MRI‐CT images are obtained as SSIM tissue at 83%, SSIM bone at 84%, accuracy at 90%, sensitivity at 96%, and specificity at 95%, and the second‐order statistical fusion metrics are obtained as the standard deviation of fused images at 79% and entropy at 0.99. The entropy value confirms the presence of additional features in the fused image. The proposed Tumnet yields a sensitivity of 96%, an accuracy of 98%, a specificity of 99%, normalized values of the mean of 0.75, a standard deviation of 0.4, a variance of 0.16, and an entropy of 0.90. [ABSTRACT FROM AUTHOR]

This paper extends our previous method for COVID-19 diagnosis, proposing an enhanced solution for detecting COVID-19 from computed tomography (CT) images using a lean transfer learning-based model. To decrease model misclassifications, two key steps of image processing were employed. Firstly, the uppermost and lowermost slices were removed, preserving sixty percent of each patient's slices. Secondly, all slices underwent manual cropping to emphasize the lung areas. Subsequently, resized CT scans (224 × 224) were input into an Xception transfer learning model with a modified output. Both Xception's architecture and pretrained weights were leveraged in the method. A big and rigorously annotated database of CT images was used to verify the method. The number of patients/subjects in the dataset is more than 5000, and the number and shape of the slices in each CT scan varies greatly. Verification was made both on the validation partition and on the test partition of unseen images. Results on the COV19-CT database showcased not only improvement from our previous solution and the baseline but also comparable performance to the highest-achieving methods on the same dataset. Further validation studies could explore the scalability and adaptability of the developed methodologies across diverse healthcare settings and patient populations. Additionally, investigating the integration of advanced image processing techniques, such as automated region of interest detection and segmentation algorithms, could enhance the efficiency and accuracy of COVID-19 diagnosis. [ABSTRACT FROM AUTHOR]

Segmentation of pulmonary vessels in CT/CTA images can help physicians better determine the patient's condition and treatment. However, due to the complexity of CT images, existing methods have limitations in the segmentation of pulmonary vessels. In this paper, a method based on the separation of pulmonary vessels in CT/CTA images is investigated. The method is divided into two steps: in the first step, the lung parenchyma is extracted using the Unet++ algorithm, which can effectively reduce the oversegmentation rate; in the second step, the pulmonary vessels in the lung parenchyma are extracted using nnUnet. According to the obtained lung parenchyma segmentation results, the "AND" operation is performed on the original image and the lung parenchyma segmentation results, and only the blood vessels within the lung parenchyma are segmented, which reduces the interference of external tissues and improves the segmentation accuracy. The experimental data source used CT/CTA images acquired from the partner hospital. After the experiments were performed on a total of 67 sets of images, the accuracy of CT and CTA images reached 85.1% and 87.7%, respectively. The comparison of whether to segment the lung parenchyma and with other conventional methods was also performed, and the experimental results showed that the algorithm in this paper has high accuracy. [ABSTRACT FROM AUTHOR]

The presence of streak metal artifacts seriously degrades the diagnostic value and deteriorates the qualities of CT images. Analyzing the causes and classical streak metal artifact reduction (MAR) methods, the paper proposes the streak metal artifact reduction method based on sinogram fusion and tissue-class mode for CT images (F-MAR). Firstly, the original CT images are corrected using a linear interpolation streak metal artifact reduction (L-MAR) scheme in the raw data domain. Subsequently, to preserve the edge information, the metal artifact-reduced images are then smoothed into smoothed images (tissue-class model) by using the mean filter. Segment the original CT image that contained the streak artifacts. The original CT image and the CT image that contained high-density material are projected into the original sinogram and the high density material sinogram, respectively. Secondly, the simple linear interpolation is used to correct the CT original CT image into the corrected CT image. The mean filter is applied in the corrected CT image. The corrected CT image is projected into the corrected sinogram. Thirdly, according to the position of the high density material sinogram located in the original sinogram and the corrected sinogram, the original position sinogram included in the original sinogram and the corrected position sinogram included in the corrected sinogram are, respectively, obtained. The two sinograms are fused into the fused sinogram. The fused sinogram, the original sinogram, and the high-density material sinogram are fused into the final sinogram. Finally, the filtered back projection reconstruction algorithm is used to reconstruct the final sinogram into the reconstructed CT image. The reconstructed CT image and high density material image are fused into the final image. The experimentation results show that the method proposed in the paper can obtain better correction effect than the classical correction methods in vision. [ABSTRACT FROM AUTHOR]

The emergence of the latest technologies gives rise to the usage of noninvasive techniques for assisting health-care systems. Amongst the four major cardiovascular diseases, stroke is one of the most dangerous and life-threatening disease, but the life of a patient can be saved if the stroke is detected during early stage. The literature reveals that the patients always experience ministrokes which are also known as transient ischemic attacks (TIA) before experiencing the actual attack of the stroke. Most of the literature work is based on the MRI and CT scan images for classifying the cardiovascular diseases including a stroke which is an expensive approach for diagnosis of early strokes. In India where cases of strokes are rising, there is a need to explore noninvasive cheap methods for the diagnosis of early strokes. Hence, this problem has motivated us to conduct the study presented in this paper. A noninvasive approach for the early diagnosis of the strokes is proposed. The cascaded prediction algorithms are time-consuming in producing the results and cannot work on the raw data and without making use of the properties of EEG. Therefore, the objective of this paper is to devise mechanisms to forecast strokes on the basis of processed EEG data. This paper is proposing time series-based approaches such as LSTM, biLSTM, GRU, and FFNN that can handle time series-based predictions to make useful decisions. The experimental research outcome reveals that all the algorithms taken up for the research study perform well on the prediction problem of early stroke detection, but GRU performs the best with 95.6% accuracy, whereas biLSTM gives 91% accuracy and LSTM gives 87% accuracy and FFNN gives 83% accuracy. The experimental outcome is able to measure the brain waves to predict the signs of strokes. The findings can certainly assist the physicians to detect the stroke at early stages to save the lives of the patients. [ABSTRACT FROM AUTHOR]

Background. Coronavirus disease (COVID-19) is an infectious illness that spreads widely over a short period of time and finally causes a pandemic. Unfortunately, the lack of radiologists, improper COVID-19 diagnosing procedures, and insufficient medical supplies have all played roles in these devastating losses of life. Deep learning (DL) could be used to detect and classify COVID-19 for potential image-based diagnosis. Materials and Methods. This paper proposes an improved deep convolutional neural network (IDConv-Net) to detect and classify COVID-19 using X-ray and computed tomography (CT) images. Before the training phase, preprocessing methods such as filtering, data normalization, classification variable encoding, and data augmentation were used in conjunction with the proposed IDConv-Net to increase the effectiveness of the detection and classification processes. To extract essential features, deep CNN is then employed. As a result, the suggested model can identify patterns and relationships crucial to the image classification task, resulting in more precise and useful diagnoses. Python and Keras (with TensorFlow as a backend) were used to carry out the experiment. Results. The proposed IDConv-Net was tested using chest X-rays and CT images collected from hospitals in Sao Paulo, Brazil, and online databases. After evaluating the model, the proposed IDConv-Net achieved an accuracy of 99.53% and 98.41% in training and testing for CT images and 97.49% and 96.99% in training and testing for X-ray images, respectively. Further, the area under the curve (AUC) value is 0.954 and 0.996 for X-ray and CT images, respectively, indicating the excellent performance of the proposed model. Conclusion. The findings of our proposed IDConv-Net model confirm that the model outperformed compared to existing COVID-19 detection and classification models. The IDConv-Net outperforms current state-of-the-art models by 2.25% for X-rays and 2.81% for CT images. Additionally, the IDConv-Net training approach is significantly quicker than the current transfer learning models. [ABSTRACT FROM AUTHOR]

In this paper, we propose an improved algorithm based on the active contour model Mumford-Shah model for CT images, which is the subject of this study. After analyzing the classical Mumford-Shah model and related improvement algorithms, we found that most of the improvement algorithms start from the initialization strategy of the model and the minimum value solution of the energy generalization function, so we will also improve the classical Mumford-Shah model from these two perspectives. For the initialization strategy of the Mumford-Shah model, we propose to first reduce the dimensionality of the image data by the PCA principal component analysis method, and for the reduced image feature vector, we use K -means, a general clustering method, as the initial position algorithm of the segmentation curve. For the image data that have completed the above two preprocessing processes, we then use the Mumford-Shah model for image segmentation. The Mumford-Shah curve evolution model solves the image segmentation by finding the minimum of the energy generalization of its model to obtain the optimal result of image segmentation, so for solving the minimum of the Mumford-Shah model, we first optimize the discrete problem of the energy generalization of the model by the convex relaxation technique and then use the Chambolle-Pock pairwise algorithm We then use the Chambolle-Pock dual algorithm to solve the optimization problem of the model after convex relaxation and finally obtain the image segmentation results. Finally, a comparison with the existing model through many numerical experiments shows that the model proposed in this paper calculates the texture image segmentation with high accuracy and good edge retention. Although the work in this paper is aimed at two-phase image segmentation, it can be easily extended to multiphase segmentation problems. [ABSTRACT FROM AUTHOR]

Since two years ago, the COVID-19 virus has spread strongly in the world and has killed more than 6 million people directly and has affected the lives of more than 500 million people. Early diagnosis of the virus can help to break the chain of transmission and reduce the death rate. In most cases, the virus spreads in the infected person's chest. Therefore, the analysis of a chest CT scan is one of the most efficient methods for diagnosing a patient. Until now, various methods have been presented to diagnose COVID-19 disease in chest CT-scan images. Most recent studies have proposed deep learning-based methods. But handcrafted features provide acceptable results in some studies too. In this paper, an innovative approach is proposed based on the combination of low-level and deep features. First of all, local neighborhood difference patterns are performed to extract handcrafted texture features. Next, deep features are extracted using MobileNetV2. Finally, a two-level decision-making algorithm is performed to improve the detection rate especially when the proposed decisions based on the two different feature set are not the same. The proposed approach is evaluated on a collected dataset of chest CT scan images from June 1, 2021, to December 20, 2021, of 238 cases in two groups of patient and healthy in different COVID-19 variants. The results show that the combination of texture and deep features can provide better performance than using each feature set separately. Results demonstrate that the proposed approach provides higher accuracy in comparison with some state-of-the-art methods in this scope. [ABSTRACT FROM AUTHOR]

Currently, deep learning has become more and more mature in the field of medical image segmentation. Through using the computer, the deep learning models established can completely help doctors to perform medical image segmentation. Most of the current deep learning models are based on Unet. The U‐shaped structure and the skip connection layer of Unet can effectively achieve precise image segmentation. However, for complicated images, the network structure of Unet is not sufficient enough. In response to this problem, some scholars have designed Unet++ by adding a denser skip connection layer to U‐Net. Compared to U‐Net, Unet++ is more effective in dealing with complex images, but it has drawbacks in many aspects, and there is still a large loss of eigenvalues in the skip connection and up‐sampling processes. To address these issues, this paper uses the channel and attention mechanism to improve the Unet++ model to obtain better image segmentation efficiency and accuracy. Meanwhile, based on Unet++, this paper designs a new model called CA‐Unet++. The proposed model uses the channel module and the attention module to solve the eigenvalues loses in the long‐distance skip connection process and the up‐sampling process, respectively. The experimental results and data analysis shows that our proposed CA‐Unet++ can achieve better performance in medical computed tomography scan image segmentation. [ABSTRACT FROM AUTHOR]

Establishing a mesoscopic numerical model to investigate the mechanical properties of concrete has very important significance. This paper considers the random distribution of aggregate in concrete. The aggregate is assumed to be spherical, respectively, to simulate the interface layer as the entity unit or the contact elements. The random aggregate model and the interface model of random aggregate were established. Based on the CT image and the application of MATLAB and MIMICS software, the different characteristics of the concrete model for 3D reconstruction were set up. Through comparative analysis of the advantages and disadvantages of different models, considering the CT number included in the CT images, this paper establishes the reconstruction model, which includes the shape of concrete aggregates, gradation, holes, etc. The analysis results have shown that the model can infer realistic concrete behavior, providing a new approach for studying concrete properties at the mesoscale. [ABSTRACT FROM AUTHOR]

In order to solve the problem of injury prevention in Wushu training, this paper proposes a research on modeling using sports medical images. The main content of this technology research is to drive the muscle strength modeling method based on the sports medical image data. According to the acquisition of MRI/CT images, through the research and application of DFIS, it is concluded that the research on sports medical image modeling has a high accuracy for injury prevention in Wushu training. The experimental results show that translation accuracy ≤ 0.03 ~0.27, rotation accuracy ≤ 0.24 ~0.63, flexion and extension accuracy ≤ 0.1 , translation retest error ≤ 0.2 ~1.2, rotation retest error ≤ 0.5 ~3.4, rotation retest accuracy ≤ 0.4 ~1.04, and sports medical images have a high accuracy for injury prevention in Wushu training. It is proved that the research on sports medical image modeling is effective and accurate for the problem of injury prevention in Wushu training. [ABSTRACT FROM AUTHOR]

Most of the people all over the world pass away from complications related to lung cancer every single day. It is a deadly form of the disease. To improve a person's chances of survival, an early diagnosis is a necessary prerequisite. In this regard, the existing methods of tumour detection, such as CT scans, are most commonly used to recognize infected regions. Despite this, there are certain obstacles presented by CT imaging, so this paper proposes a novel model which is a correlation-based model designed for analysis of lung cancer. When registering pictures of thoracic and abdominal organs with slider motion, the total variation regularization term may correct the border discontinuous displacement field, but it cannot maintain the local characteristics of the image and loses the registration accuracy. The thin-plate spline energy operator and the total variation operator are spatially weighted via the spatial position weight of the pixel points to construct an adaptive thin-plate spline total variation regular term for lung image CT single-mode registration and CT/PET dual-mode registration. The regular term is then combined with the CRMI similarity measure and the L-BFGS optimization approach to create a nonrigid registration procedure. The proposed method assures the smoothness of interior of the picture while ensuring the discontinuous motion of the border and has greater registration accuracy, according to the experimental findings on the DIR-Lab 4D-CT public dataset and the CT/PET clinical dataset. [ABSTRACT FROM AUTHOR]

Novel coronavirus pneumonia (NCP) has become a global pandemic disease, and computed tomography-based (CT) image analysis and recognition are one of the important tools for clinical diagnosis. In order to assist medical personnel to achieve an efficient and fast diagnosis of patients with new coronavirus pneumonia, this paper proposes an assisted diagnosis algorithm based on ensemble deep learning. The method combines the Stacked Generalization ensemble learning with the VGG16 deep learning to form a cascade classifier, and the information constituting the cascade classifier comes from multiple subsets of the training set, each of which is used to collect deviant information about the generalization behavior of the data set, such that this deviant information fills the cascade classifier. The algorithm was experimentally validated for classifying patients with novel coronavirus pneumonia, patients with common pneumonia (CP), and normal controls, and the algorithm achieved a prediction accuracy of 93.57%, sensitivity of 94.21%, specificity of 93.93%, precision of 89.40%, and F1-score of 91.74% for the three categories. The results show that the method proposed in this paper has good classification performance and can significantly improve the performance of deep neural networks for multicategory prediction tasks. [ABSTRACT FROM AUTHOR]

Based on smooth particle hydrodynamics (SPH) method, this paper carried out the numerical simulation of ultra-high-pressure water jet (UHP-WJ) impacting steel fiber reinforced concrete (SFRC), verified the established numerical model by UHP-WJ impacting SFRC and computed tomography (CT) scanning experiments, and explored breaking mechanism and damage evolution rule of SFRC impacted by UHP-WJ. Results indicate that in the weak effect zone of steel fiber, the failure of concrete is generated and developed along the axial direction of UHP-WJ into a bowl-shaped crater with the combining action of compressive stress and shear stress. In the affected area of steel fiber, due to the inhomogeneity in the contact area of steel fiber and concrete, the stress concentration in the contact area is produced, causing the formation of propagated crack along the steel fiber. And the steel fiber has an obstruction effect on the development of broken bodies on the upper and lower sides of steel fiber. With the sustained action of UHP-WJ, the steel fiber in the intense radiation area of stress waves takes place fracture and finally the broken bodies on the upper and lower sides of steel fiber fuse. In addition, based on the CT scans and digital image processing technology, this paper also comparatively analyzed the internal fragmentations of SFRC and the ordinary concrete subjected to UHP-WJ impact, and it is found that compared with the ordinary concrete, there is smaller dimension of crater and it is difficult to engender macrocrack for SFRC, with lower damage and higher damage attenuation speed along the axial and radial directions. [ABSTRACT FROM AUTHOR]

Digital tools and apps are revolutionizing healthcare and provide creative answers to urgent problems. Through teamwork and the incorporation of digital technologies, dentistry has experienced a remarkable revolution. A large body of scholarly research backs up this trend. The context, trends, and content of digital health technology in oral and dental health are examined in our bibliometric analysis. Using targeted keywords and synonyms, an organized searching technique was used in the Scopus database, yielding 1942 articles that were extracted into a CSV file. To acquire insights into the content, trends, and context, visualization using VOSviewer 1.6.18 and a variety of analyses—including coauthorship, citation, cooccurrence of author keywords, bibliographic coupling, and cocitation—were executed. The analysis revealed that the USA and the UK contributed to a significant quantity of the literature, with newer contributions coming from nations like India. Cone Beam Computed Tomography, Dental Caries, and Artificial Intelligence were prominent keywords. It is important to note that BMC Oral Health was associated with a sizable number of the papers. This bibliometric analysis provides insightful information about the context, content, and trends of digital health in the field of oral and dental health. By implementing the right technology, policymakers can use this information to increase oral health, encourage dental literacy, and improve access to dental treatment. It is vital to take into account the wide variety of technologies and their classifications based on dental services and contextual variables. [ABSTRACT FROM AUTHOR]

Tracheal diverticulum (TD) is a rare disease. Due to the worldwide pandemic of COVID-19, the increase of routine preoperative chest CT examination has led to a higher detection rate of TD. Although TD is very rare, it is one of the reasons for difficult intubation and difficult ventilation. Improper treatment can cause severe airway emergencies such as diverticulum tearing, tracheal rupture, and subcutaneous or mediastinal emphysema. Unfortunately, there are few studies on TD, especially in perioperative airway and anesthesia management. This paper reports a case of TD found by preoperative chest CT examination who required tracheal intubation under general anesthesia. For the first time, ultrasound was used to confirm the position of tracheal tube and TD, and good results were achieved. This attempt provides a new idea and method for airway management in patients with TD. [ABSTRACT FROM AUTHOR]

Objective. Artificial intelligence-powered screening systems of coronavirus disease 2019 (COVID-19) are urgently demanding since the ongoing outbreak of SARS-CoV-2 worldwide. Chest CT or X-ray is not sufficient to support the large-scale screening of COVID-19 because mildly-infected patients do not have imaging features on these images. Therefore, it is imperative to exploit supplementary medical imaging strategies. Traditional Chinese medicine has played an essential role in the fight against COVID-19. Methods. In this paper, we conduct two kinds of verification experiments based on a newly-collected multi-modality dataset, which consists of three types of modalities: tongue images, chest CT scans, and X-ray images. First, we study a binary classification experiment on tongue images to verify the discriminative ability between COVID-19 and non-COVID-19. Second, we design extensive multimodality experiments to validate whether introducing tongue image can improve the screening accuracy of COVID-19 based on chest CT or X-ray images. Results. Tongue image screening of COVID-19 showed that the accuracy (ACC), sensitivity (SEN), specificity (SPEC), and Matthew correlation coefficient (MCC) of the improved AlexNet and Googlenet both reached 98.39%, 98.97%, 96.67%, and 99.11%. The fusion of chest CT and tongue images used a tandem multimodal classifier fusion strategy to achieve optimal classification, and the results and screening accuracy of COVID-19 reached 98.98%, resulting in a significant improvement of 4.75% the highest accuracy in 375 years compared with the single-modality model. The fusion of chest x-rays and tongue images also had good classification accuracy. Conclusions. Both experimental results demonstrate that tongue image not only has an excellent discriminative ability for screening COVID-19 but also can improve the screening accuracy based on chest CT or X-rays. To the best of our knowledge, it is the first work that verifies the effectiveness of tongue image on screening COVID-19. This paper provides a new perspective and a novel solution that contributes to large-scale screening toward fast stopping the pandemic of COVID-19. [ABSTRACT FROM AUTHOR]

The BSL k-ω turbulence model was used to numerically simulate the inspiratory airflow of the airway with foreign bodies using a real CT scan human airway model. The paper selects three foreign bodies with different diameters, three different foreign body positions, and three different breathing intensities, and the FLUENT software is used to perform numerical simulation. This study has found that the increase in the diameter of the foreign body and flow velocity will make the flow structure in the airway more complicated. The airway pressure will increase so that the resistance of breathing will increase, and the shear force will also increase, which hurt the airway. The impact of the foreign body on the left side on the flow structure in the airway is less than that of the foreign body on the right side. The foreign body on the left side causes the pressure drop in the airway to be higher than that on the right side. Moreover, sharp changes in pressure driving force and airway curvature will affect the airflow pattern of the central airway. We concluded that foreign matter has a great influence on the characteristics of the airflow structure, and more research is needed to increase the understanding of the airflow pattern under the condition of foreign matter in the airway, and the research helps doctors avoid the influence of airflow when removing foreign bodies in the airway. [ABSTRACT FROM AUTHOR]

Automated disease prediction has now become a key concern in medical research due to exponential population growth. The automated disease identification framework aids physicians in diagnosing disease, which delivers accurate disease prediction that provides rapid outcomes and decreases the mortality rate. The spread of Coronavirus disease 2019 (COVID-19) has a significant effect on public health and the everyday lives of individuals currently residing in more than 100 nations. Despite effective attempts to reach an appropriate trend to forecast COVID-19, the origin and mutation of the virus is a crucial obstacle in the diagnosis of the detected cases. Even so, the development of a model to forecast COVID-19 from chest X-ray (CXR) and computerized tomography (CT) images with the correct decision is critical to assist with intelligent detection. In this paper, a proposed hybrid model of the artificial neural network (ANN) with parameters optimization by the butterfly optimization algorithm has been introduced. The proposed model was compared with the pretrained AlexNet, GoogLeNet, and the SVM to identify the publicly accessible COVID-19 chest X-ray and CT images. There were six datasets for the examinations: three datasets with X-ray pictures and three with CT images. The experimental results approved the superiority of the proposed model for cognitive COVID-19 pattern recognition with average accuracy 90.48, 81.09, 86.76, and 84.97% for the proposed model, support vector machine (SVM), AlexNet, and GoogLeNet, respectively. [ABSTRACT FROM AUTHOR]

The value of automatic organ-at-risk outlining software for radiotherapy is based on artificial intelligence technology in clinical applications. The accuracy of automatic segmentation of organs at risk (OARs) in radiotherapy for nasopharyngeal carcinoma was investigated. In the automatic segmentation model which is proposed in this paper, after CT scans and manual segmentation by physicians, CT images of 147 nasopharyngeal cancer patients and their corresponding outlined OARs structures were selected and grouped into a training set (115 cases), a validation set (12 cases), and a test set (20 cases) by complete randomization. Adaptive histogram equalization is used to preprocess the CT images. End-to-end training is utilized to improve modeling efficiency and an improved network based on 3D Unet (AUnet) is implemented to introduce organ size as prior knowledge into the convolutional kernel size design to enable the network to adaptively extract features from organs of different sizes, thus improving the performance of the model. The DSC (Dice Similarity Coefficient) coefficients and Hausdorff (HD) distances of automatic and manual segmentation are compared to verify the effectiveness of the AUnet network. The mean DSC and HD of the test set were 0.86 ± 0.02 and 4.0 ± 2.0 mm, respectively. Except for optic nerve and optic cross, there was no statistical difference between AUnet and manual segmentation results (P > 0.05). With the introduction of the adaptive mechanism, AUnet can achieve automatic segmentation of the endangered organs of nasopharyngeal carcinoma based on CT images more accurately, which can substantially improve the efficiency and consistency of segmentation of doctors in clinical applications. [ABSTRACT FROM AUTHOR]

The emergence of energy spectrum CT provides greater diagnostic value for clinical practice. Its advantage is that it can provide more functional imaging parameters and accurate image information for clinical practice, which represents a mainstream direction of CT technology development at present. This paper mainly studies the clinical trial of CAMPO Precision128 Max ENERGY spectrum CT combined with multiple parameters to evaluate the benign and malignant pleural effusion. This paper analyzes the principle and key performance parameters of energy spectrum CT imaging, the etiology of pleural effusion, and its conventional diagnostic methods and uses energy spectrum CT to detect the benign and malignant pleural effusion. In this paper, two groups of patients with different types of pleural effusions were scanned by line spectrum chest CT scans, and energy spectrum analysis software was used to measure and calculate the CT values of conventional mixed energy values of ROI of patients with pleural effusions. For the CT value and energy curve slope measurement value of different single energy keV, independent sample t-test was used to analyze and compare the two sets of data, and finally it has been found out that the two sets of data were similar. According to the experimental results, the curves of energy spectrum of the two groups of data are similar in the descending curve of bow-back. The slope of energy spectrum curve in the leakage group was lower than that in the exudate group, showing statistical significance (P < 0.05). The slope of energy spectrum curve K in the malignant pleural effusion group was significantly higher than that in the benign pleural effusion group, and the difference was statistically significant (P < 0.05). The trend of energy spectrum curves of the two is roughly the same, while at the high energy level, part of the energy spectrum curves of the two are overlapped. The above conclusion indicates that energy spectrum CT plays a certain role in the differential diagnosis of pleural effusion. At the same time, energy spectrum CT also provides a noninvasive and rapid examination method for clinical differentiation of pleural effusion, which has certain clinical application value and prospect. [ABSTRACT FROM AUTHOR]

Background. Though treatable, osteoporosis continues as a substantially underdiagnosed and undertreated condition. Bone mineral density (BMD) monitoring will definitely aid in the prediction and prevention of medical emergencies arising from osteoporosis. Although quantitative computed tomography (QCT) is one of the most widely accepted tools for measuring BMD, it lacks the contribution of bone architecture in predicting BMD, which is significant as aging progresses. This paper presents an innovative approach for the prediction of BMD incorporating bone architecture that involves no extra cost, time, and exposure to severe radiation. Methods. In this approach, the BMD is predicted using clinical CT scan images taken for other indications based on image processing and artificial neural network (ANN). The network used in this study is a standard backpropagation neural network having five input neurons with one hidden layer having 40 neurons with a tan-sigmoidal activation function. The Digital Imaging and Communications in Medicine (DICOM) image properties extracted from QCT of human skull and femur bone of rabbit that are closely associated with the BMD are used as input parameters of the ANN. The density value of the bone which is computed from the Hounsfield units of QCT scan image through phantom calibration is used as the target value for training the network. Results. The ANN model predicts the density values using the image properties from the clinical CT of the same rabbit femur bone and is compared with the density value computed from QCT scan. The correlation coefficient between predicted BMD and QCT density valued to 0.883. The proposed network can assist clinicians in identifying early stage of osteoporosis and devise suitable strategies to improve BMD with no additional cost. [ABSTRACT FROM AUTHOR]

Introduction: The Nuss procedure is the most common procedure used to treat patients with pectus excavatum. The effect of the Nuss bars on the long-term internal mammary artery flow (IMA) is not well studied. This could have an impact on patients requiring a coronary artery bypass grafting surgery after the Nuss procedure. We performed a systematic review to study the impact of the Nuss bars on the IMA long term flow.Methods: A Medline search from January 1990 to August 2020 was performed using [Nuss OR thoracoscopic pectus OR minimally invasive pectus] AND [Internal mammary OR Internal thoracic OR IMA OR ITA]. English language papers only were included. This trial was registered with PROSPERO under registration number CRD42021234010.Results: A total of 48 papers were identified using the reported search, of which three represented the best evidence to answer the clinical question. One study looked at the IMA flow via computed tomography (CT)-angiography on the 10th postoperative day after the Nuss procedure and found 15 out of 34 patients (44%) to have abnormal IMA blood flow but with no clinical consequences. Two studies looked at the IMA flow after removal of the Nuss-bar. The first study utilized CT-angiography on the 5th postoperative day after Nuss-bar removal and found four out of the six patients studied (67%) to have abnormal flow. The last study was composed of 19 patients and looked at IMA flow during the presence of the Nuss-bars and after its removal utilizing Doppler-angiography. It found 11 out of 19 patients (58%) to have abnormal blood flow with the bars in place. After removal of the bars, only two patients (10%) were found to have unilateral IMA obstructed flow.Conclusion: In patients undergoing the Nuss procedure for management of pectus excavatum, the internal mammary artery flow is compromised in 44%-58% of patients with the bar in situ. When these patients are assessed 10 days following removal of the bar, some reversal of compromised IMA flow is evident. However, in up to 67% of patients, abnormal IMA flow remains. Further studies are required to determine whether this abnormal flow is permanent, which will require examining patients at longer follow-up intervals. Patients undergoing coronary artery bypass grafting who have a history of a Nuss procedure should receive preoperative IMA imaging. [ABSTRACT FROM AUTHOR]

The traditional CT image segmentation algorithm is easy to ignore image contour initialization, which leads to the problem of long time consuming and low accuracy. A superpixel mesh CT image improved segmentation algorithm using active contour was proposed. CT image superpixel gridding was carried out first; secondly, on the basis of gridding, the region growth criterion was improved by superpixel processing, the region growth graph was established, the image edge salient graph was calculated based on the growth graph, and the target edge was obtained as the initial contour; finally, the Mumford-Shah model in the active contour model was improved; the energy functional was constructed based on the improved model and transformed into the symbol distance function. The results show that the proposed algorithm takes less time to mesh superpixels, the accuracy of image edge calculation is high, the correct classification coefficient is as high as 0.9, and the accuracy of CT image segmentation is always higher than 90%, which has superiority. [ABSTRACT FROM AUTHOR]

Lung cancer is the primary reason of cancer deaths worldwide, and the percentage of death rate is increasing step by step. There are chances of recovering from lung cancer by detecting it early. In any case, because the number of radiologists is limited and they have been working overtime, the increase in image data makes it hard for them to evaluate the images accurately. As a result, many researchers have come up with automated ways to predict the growth of cancer cells using medical imaging methods in a quick and accurate way. Previously, a lot of work was done on computer-aided detection (CADe) and computer-aided diagnosis (CADx) in computed tomography (CT) scan, magnetic resonance imaging (MRI), and X-ray with the goal of effective detection and segmentation of pulmonary nodule, as well as classifying nodules as malignant or benign. But still, no complete comprehensive review that includes all aspects of lung cancer has been done. In this paper, every aspect of lung cancer is discussed in detail, including datasets, image preprocessing, segmentation methods, optimal feature extraction and selection methods, evaluation measurement matrices, and classifiers. Finally, the study looks into several lung cancer-related issues with possible solutions. [ABSTRACT FROM AUTHOR]

Craniomaxillofacial defects caused by congenital or acquired reasons seriously affect patients' physical and mental health. How to accurately and objectively repair the morphology of craniomaxillofacial tissues and organs through surgery is a difficult problem, and the preoperative virtual design is crucial. Traditional preoperative virtual design methods include mirror technology, statistical shape model, and deformable template. However, these methods are complex, time‐consuming, and only applicable to some types of defects. Therefore, a general, intelligent, and personalized craniomaxillofacial defect virtual reconstruction system is desired. To solve this problem, a novel deep learning method, RecGAN, is proposed in this paper. RecGAN can learn the bone morphology of normal people, repair the defect intelligently based on the patient's remaining bone, and fully adapt to the special conditions of different patients. Currently, there are no open‐source maxillofacial data sets available. Thus, a new maxillofacial computed tomography image data set with 500 simulated cases and 100 clinical cases is constructed to train and validate the method. The experimental results show that RecGAN can effectively restore the normal bone and tissue morphology of the patient's craniomaxillofacial defect area, solve the problem that there is no objective repair method for craniomaxillofacial defect, and achieve the best effect in the same type of research. The proposed intelligent craniomaxillofacial defect virtual reconstruction system based on RecGAN is expected to be applied in future clinical practice. [ABSTRACT FROM AUTHOR]

Reverse Transcription Polymerase Chain Reaction (RT-PCR) used for diagnosing COVID-19 has been found to give low detection rate during early stages of infection. Radiological analysis of CT images has given higher prediction rate when compared to RT-PCR technique. In this paper, hybrid learning models are used to classify COVID-19 CT images, Community-Acquired Pneumonia (CAP) CT images, and normal CT images with high specificity and sensitivity. The proposed system in this paper has been compared with various machine learning classifiers and other deep learning classifiers for better data analysis. The outcome of this study is also compared with other studies which were carried out recently on COVID-19 classification for further analysis. The proposed model has been found to outperform with an accuracy of 96.69%, sensitivity of 96%, and specificity of 98%. [ABSTRACT FROM AUTHOR]

This paper proposes a new base material, a mixture of alcohol and water, for liquid scintillators. A possibility of using alcohol as a new detection solution in a particle detector is described. A liquid scintillator is widely used in various fields because of its high light yield. In addition, it is very important to develop a stable liquid scintillator for particle detectors or other medical applications. To date, there have been no previous R&D studies elsewhere for the use of alcohol in particle detectors, and no market products are available of this type. Thus, there is a room for improvement. This paper describes the brief synthesizing process of the alcohol-based liquid scintillator by varying the mixing ratio of each component that makes up the liquid scintillator. The several feasible physical and optical properties of an alcohol-based liquid scintillator were investigated and presented. Finally, as one of its applications, a range (beam-path length) measurement using an electron beam in medical physics is introduced after irradiating an alcohol-based liquid scintillator with electron beam energies of 6~12 MeV. The measurement results were compared with a Monte Carlo simulation, Novalis Tx, a phantom, and a CT image. In the near future, the new alcohol-based liquid scintillator could be used for particle detector or medical imaging applications. [ABSTRACT FROM AUTHOR]

This paper aims to investigate the use of transfer learning architectures in the detection of COVID-19 from CT lung scans. The study evaluates the performances of various transfer learning architectures, as well as the effects of the standard Histogram Equalization and Contrast Limited Adaptive Histogram Equalization. The findings of this study suggest that transfer learning-based frameworks are an alternative to the contemporary methods used to detect the presence of the virus in patients. The highest performing model, the VGG-19 implemented with the Contrast Limited Adaptive Histogram Equalization, on a SARS-CoV-2 dataset, achieved an accuracy and recall of 95.75% and 97.13%, respectively. [ABSTRACT FROM AUTHOR]

Abrasive water jet (AWJ) breaking technology is suitable for the maintenance and repair of concrete structures, generating minimal dust, low tool wear, and no vibrations or selective destruction. The failure features and mechanisms of concrete subjected to AWJ impact are fundamental issues of AWJ breaking technology, which are also related to the safety and quality of engineering construction. Based on computed tomography (CT), scanning electron microscopy (SEM), and image processing technology, this paper studied the fragmentation pattern and removal mechanism of concrete under AWJ impact. The general failure characteristics and crack propagation law of concrete subjected to AWJ impact were described through AWJ impact concrete tests. The spatial distribution of damage in concrete subjected to AWJ impact can be divided into the intensive action zone, the transition zone, and the weak action zone. The removal mechanism of AWJ was discussed by comparing the impact performance of a pure water jet (PWJ) system. The results indicate that abrasive particles can cause cliff-shaped fracture and lip-shaped distortion in the aggregate part and flat fracture surface in the matrix part. There is no obvious crack in the interfacial transition zone (ITZ) due to the weakening of the water wedge effect. [ABSTRACT FROM AUTHOR]

Nonnegative sparse representation has become a popular methodology in medical analysis and diagnosis in recent years. In order to resolve network degradation, higher dimensionality in feature extraction, data redundancy, and other issues faced when medical images parameters are trained using convolutional neural networks. Lung tumors in chest CT image based on nonnegative, sparse, and collaborative representation classification of DenseNet (DenseNet-NSCR) are proposed by this paper: firstly, initialization parameters of pretrained DenseNet model using transfer learning; secondly, training DenseNet using CT images to extract feature vectors for the full connectivity layer; thirdly, a nonnegative, sparse, and collaborative representation (NSCR) is used to represent the feature vector and solve the coding coefficient matrix; fourthly, the residual similarity is used for classification. The experimental results show that the DenseNet-NSCR classification is better than the other models, and the various evaluation indexes such as specificity and sensitivity are also high, and the method has better robustness and generalization ability through comparison experiment using AlexNet, GoogleNet, and DenseNet-201 models. [ABSTRACT FROM AUTHOR]

Kidney tumor (KT) is one of the diseases that have affected our society and is the seventh most common tumor in both men and women worldwide. The early detection of KT has significant benefits in reducing death rates, producing preventive measures that reduce effects, and overcoming the tumor. Compared to the tedious and time-consuming traditional diagnosis, automatic detection algorithms of deep learning (DL) can save diagnosis time, improve test accuracy, reduce costs, and reduce the radiologist's workload. In this paper, we present detection models for diagnosing the presence of KTs in computed tomography (CT) scans. Toward detecting and classifying KT, we proposed 2D-CNN models; three models are concerning KT detection such as a 2D convolutional neural network with six layers (CNN-6), a ResNet50 with 50 layers, and a VGG16 with 16 layers. The last model is for KT classification as a 2D convolutional neural network with four layers (CNN-4). In addition, a novel dataset from the King Abdullah University Hospital (KAUH) has been collected that consists of 8,400 images of 120 adult patients who have performed CT scans for suspected kidney masses. The dataset was divided into 80% for the training set and 20% for the testing set. The accuracy results for the detection models of 2D CNN-6 and ResNet50 reached 97%, 96%, and 60%, respectively. At the same time, the accuracy results for the classification model of the 2D CNN-4 reached 92%. Our novel models achieved promising results; they enhance the diagnosis of patient conditions with high accuracy, reducing radiologist's workload and providing them with a tool that can automatically assess the condition of the kidneys, reducing the risk of misdiagnosis. Furthermore, increasing the quality of healthcare service and early detection can change the disease's track and preserve the patient's life. [ABSTRACT FROM AUTHOR]

Automatic segmentation of coal crack in CT images is of great significance for the establishment of digital cores. In addition, segmentation in this field remains challenging due to some properties of coal crack CT images: high noise, small targets, unbalanced positive and negative samples, and complex, diverse backgrounds. In this paper, a segmentation method of coal crack CT images is proposed and a dataset of coal crack CT images is established. Based on the semantic segmentation model DeepLabV3+ of deep learning, the OS of the backbone has been modified to 8, and the ASPP module rate has also been modified. A new loss function is defined by combining CE loss and Dice loss. This deep learning method avoids the problem of manually setting thresholds in traditional threshold segmentation and can automatically and intelligently extract cracks. Besides, the proposed model has 0.1%, 1.2%, 2.9%, and 0.5% increase in Acc, mAcc, MioU, and FWIoU compared with other techniques and has 0.1%, 0.8%, 2%, and 0.4% increase compared with the original DeepLabV3+ on the dataset of coal CT images. The obtained results denote that the proposed segmentation method outperforms existing crack detection techniques and have practical application value in safety engineering. [ABSTRACT FROM AUTHOR]

Medical imaging feature analysis is the basis of medical image processing and analysis. The solution of this problem not only directly affects the successful application of computer graphics and image technology in medicine but also has important theoretical and practical significance. In this paper, the imaging characteristics and clinical significance are discussed by studying the comprehensive evaluation of aortic valve and root before aortic valve replacement. In recent years, preoperative comprehensive evaluation of the aortic valve and root has been gradually carried out. Compared with traditional methods, minimally invasive surgery brings more accurate diagnosis to patients, quick recovery and discharge after surgery, and less pain. This study retrospectively includes patients with severe aortic stenosis who underwent TAVR with routine computed tomography. Based on CT images, the determination and grouping of bicuspid aortic valve and tricuspid aortic valve were completed. Thirteen cross-sectional levels of the aorta-iliac-femoral vascular access were completed. The results showed that 3 people had stroke (17.6%) and 5 people had myocardial infarction (29.4%) during the follow-up period. Atrial fibrillation occurred in 5 patients (29.4%), permanent pacemaker implantation was performed in 1 patient (5.9%), and acute kidney injury occurred in 7 patients (41.2%). No patient died due to surgery-related causes, and the analysis of imaging features and clinical significance in the preoperative comprehensive evaluation of the aortic valve and root played a crucial role. In the training stage, the principal component analysis method was used to train the shape, and the model of the shape intensity of the aortic valve and the shape change of each principal component was obtained. The most probable aortic valve region in the target image was obtained by matching the similarity of all atlases, and the correct aortic valve segmentation was obtained by using the first level set of shape intensity. The experimental part verified the accuracy of the algorithm. [ABSTRACT FROM AUTHOR]

With an astounding five million fatal cases every year, lung cancer is among the leading causes of mortality worldwide for both men and women. The diagnosis of lung illnesses can benefit from the information a computed tomography (CT) scan can offer. The major goals of this study are to diagnose lung cancer and its seriousness and to identify malignant lung nodules from the provided input lung picture. This paper applies unique deep learning techniques to identify the exact location of the malignant lung nodules. Using a DenseNet model, mixed ground glass is analyzed in low-dose, low-resolution CT scan images of nodules (mGGNs) with a slice thickness of 5 mm in this study. This was done to categorize and identify many histological subtypes of lung cancer. Low-resolution CT scans are used to pathologically classify invasive adenocarcinoma (IAC) and minimally invasive adenocarcinoma (MIA). 105 low-resolution CT images with 5 mm thick slices from 105 patients at Lishui Central Hospital were selected. To detect and distinguish, IAC and MIA, extend and enhance deep learning two- and three-dimensional DenseNet models are used. The two-dimensional DenseNet model was shown to perform much better than the three-dimensional DenseNet model in terms of classification accuracy (76.67%), sensitivity (63.3%), specificity (100%), and area under the receiver operating characteristic curve (0.88). Finding the histological subtypes of persons with lung cancer should aid doctors in making a more precise diagnosis, even if the image quality is not outstanding. [ABSTRACT FROM AUTHOR]

The crack propagation evolution of carbonaceous mudstone under the action of dry-wet cycles is an important cause of the unstable failure of this type of slope. This paper attempts to reveal the evolution mechanism of mesocrack and macrocrack propagation in carbonaceous mudstone under the action of dry-wet cycles from chemical, physical, and mechanical perspectives. Firstly, the soaking solution of carbonaceous mudstone during the dry-wet cycles was extracted for an ion concentration test to analyze the chemical reactions of carbonaceous mudstone. Then, CT scans were performed on the carbonaceous mudstone samples to study the changing pattern of mesostructure of carbonaceous mudstone during the dry-wet cycles. In the end, the mechanical properties and failure characteristics of carbonaceous mudstone after dry-wet cycles were studied by triaxial compression tests. The results showed that chemical reactions such as calcite dissolution, potassium feldspar hydrolysis, and sodium feldspar hydrolysis occurred during the dry-wet cycle of carbonaceous mudstone. Affected by the dry-wet cycles, the mesostructure of the carbonaceous mudstone gradually changed from face-face contact and edge-face contact to edge-corner contact and corner-corner contact, and the interlayer flake structure was opened and was locally curled and fractured. With the increase in the number of dry-wet cycles, the failure characteristic of carbonaceous mudstone transformed from tensile failure to shear failure, the failure surface of carbonaceous mudstone was deflected from 90° to 60°, and the crack propagation path of carbonaceous mudstone became more complicated. The chemical reaction of carbonaceous mudstone minerals during the dry-wet cycle is an important reason for the initiation and development of pores. The dry-wet cycle aggregates the propagation of mesocracks and structural disorder, transforming the uniform stress state of the rock mesostructure to the concentrated stress state, which is the important reason for the macrocrack propagation evolution of carbonaceous mudstone. [ABSTRACT FROM AUTHOR]

Because of the large amount of gravel with particle sizes over 40 mm in the soil-rock mixture (SRM), it is impossible to determine its California Bearing Ratio (CBR) via the indoor test method, which is a key parameter for designing the backfill in underground mined cavities or the road subgrade constructed with SRM. In this paper, X-ray computed tomography (CT) scanning and 3D reconstruction technology were used to construct the 3D structure of SRM particles with a particle size greater than 5 mm. Based on the vertical vibration test method (VVTM) and PFC3D, the numerical simulation method (NSM-CBR) of SRM was established. The CBR of the SRM with a maximum particle size over 40 mm (SRM-G) was studied by NSM-CBR, and the effects of factors such as maximum particle size, soil content, and large-size particle content (d ≥ 40 mm) on the CBR were investigated via NSM-CBR. Based on the laboratory tests and NSM-CBR, the prediction model and the determining method of CBR of SRM-G were established and verified. The results show that the maximum deviation between the CBR obtained from NSM-CBR and laboratory tests was 7.4%. The CBR of SRM-G decreases linearly with the increase in soil content and increases with the increase in maximum particle size and large-size particle content. The practical project shows that the maximum deviation between the predictive and measured values of the CBR of SRM-G was less than 1.5%, indicating that the prediction model and the method established in this paper have high reliability. [ABSTRACT FROM AUTHOR]

The super-resolution (SR) reconstruction of a single image is an important image synthesis task especially for medical applications. This paper is studying the application of image segmentation for lung cancer images. This research work is utilizing the power of deep learning for resolution reconstruction for lung cancer-based images. At present, the neural networks utilized for image segmentation and classification are suffering from the loss of information where information passes through one layer to another deep layer. The commonly used loss functions include content-based reconstruction loss and generative confrontation network. The sparse coding single-image super-resolution reconstruction algorithm can easily lead to the phenomenon of incorrect geometric structure in the reconstructed image. In order to solve the problem of excessive smoothness and blurring of the reconstructed image edges caused by the introduction of this self-similarity constraint, a two-layer reconstruction framework based on a smooth layer and a texture layer is proposed for a medical application of lung cancer. This method uses a global nonzero gradient number constrained reconstruction model to reconstruct the smooth layer. The proposed sparse coding method is used to reconstruct high-resolution texture images. Finally, a global and local optimization models are used to further improve the quality of the reconstructed image. An adaptive multiscale remote sensing image super-division reconstruction network is designed. The selective core network and adaptive gating unit are integrated to extract and fuse features to obtain a preliminary reconstruction. Through the proposed dual-drive module, the feature prior drive loss and task drive loss are transmitted to the super-resolution network. The proposed work not only improves the subjective visual effect but the robustness has also been enhanced with more accurate construction of edges. The statistical evaluators are used to test the viability of the proposed scheme. [ABSTRACT FROM AUTHOR]

Computed tomography image (CTI) sequence is essentially a time-series data that typically consists of a large amount of nearby and similar CTIs. Due to the high communication and computational costs, it is difficult to perform a progressive distributed similarity retrieval of the large CTI sequence (CTIS)s, particularly in resource-constraint mobile telemedicine network (MTN)s. In this paper, we present a Dprs method—progressive distributed and parallel similarity retrieval scheme for the CTISs in the MTN. To the best of our knowledge, there is little research on the Dprs processing, especially in the MTN. Four supporting techniques (i.e., (1) PCTI-based similarity measurement, (2) lightweight privacy-preserving strategy, (3) SSL-based data distribution scheme, and (4) the UDI framework) are developed. The experimental evaluation indicates that our proposed Dprs method is more progressive than the state of the art, with a significant reduction in response time. [ABSTRACT FROM AUTHOR]

Femur is a thigh bone in humans, which is particularly prone to injury and difficult to mend if damaged. The stress shielding effect is caused by a change in bone mechanics transmission route as a result of femur bone damage. The formation of a porous structure provides a better solution to the problem of stress shielding effect reduction. The porous material is basically a solid which has empty space(s) which is not covered by the primary structure of particles that build up the solid's structure. Traditional porous materials have a uniform density distribution in their microstructure. The density distribution of a material should be established according to different loads in each location of the material to completely represent its characteristics. In this paper, to acquire the ideal density distribution of porous materials and construct high-performance variable-density porous structures, topological optimization is applied into the design of the lattice structure. According to a structure constructed utilising individualised parameters paired with computed tomography (CT) data of the human femur, a topological optimization design of a multiscale femoral prosthesis model based on the homogenization approach is presented. Experiments on different femoral prosthesis architectures revealed that variable-density porous prostheses have superior material and stress distributions than equal-density porous prostheses under the same stress and successfully decreased femoral stress shielding to improve prosthetic stability. [ABSTRACT FROM AUTHOR]