Search

International audience; The pyrolysis of solid polymeric materials is a complex process that involves both chemical and physical phenomena such as phase transitions, chemical reactions, heat transfer, and mass transport of gaseous components. For modeling purposes, it is important to characterize and to quantify the properties driving those phenomena, especially in the case of flame-retarded materials. In this study, protocols have been developed to characterize the thermal conductivity and the heat capacity of an ethylene-vinyl acetate copolymer (EVA) flame retarded with aluminum tri-hydroxide (ATH). These properties were measured for the various species identified across the decomposition of the material. Namely, the thermal conductivity was found to decrease as a function of temperature before decomposition whereas the ceramic residue obtained after the decomposition at the steady state exhibits a thermal conductivity as low as 0.2 W/m/K. The heat capacity of the material was also investigated using both isothermal modulated Differential Scanning Calorimetry (DSC) and the standard method (ASTM E1269). It was shown that the final residue exhibits a similar behavior to alumina, which is consistent with the decomposition pathway of EVA/ATH. Besides, the two experimental approaches give similar results over the whole range of temperatures. Moreover, the optical properties before decomposition and the heat capacity of the decomposition gases were also analyzed. Those properties were then used as input data for a pyrolysis model in order to predict gasification experiments. Mass losses of gasification experiments were well predicted, thus validating the characterization of the thermo-physical properties of the material

International audience; Radiative heat transfer to a solid is a key mechanism in fire dynamics, and in-depth absorption is especially of importance for translucent fuels. The sample-heater interaction for radiative heat transfer is experimentally investigated in this study with two different heaters (electric resistance and tungsten lamp) using clear PolyMethylMethAcrylate (PMMA) samples from two different formulations (Plexiglass and Lucite). First, the significant effects of the heater type and operating temperature on the radiative heat transfer are revealed with broadband measurements of transmittance on samples of different thicknesses. Then, the attenuation coefficient in Beer–Lambert’s law has been calculated from detailed spectral measurements over the full wavelength range encountered in real fires. The measurements present large spectral heterogeneity. These experimental results and calculation of in-depth absorption are used to explain the reason behind the apparent variation of the fuel absorbance with the sample thickness observed in past studies. The measurement of the spectral intensity emitted by the heaters verifies that the common assumption of blackbody behavior is correct for the electric resistance, whereas the tungsten lamp does not even behave as a greybody. This investigation proofs the necessity of a multi-band radiation model to calculate accurately the fire radiative heat transfer which affects directly the in-depth temperature profiles and hence the pyrolysis process for translucent fuel.