Search

International audience; This paper studies heading estimation jointly with the attitude and position estimation of a rigid body equipped with inertial and magnetic sensors in indoor environment. In contrast with other indoor dead-reckoning approaches, no assumption is made about the nature of the movement or environment layout. Based on a previous paper, an Extended Kalman Filter is designed, which includes inertial sensor biases and magnetic disturbances. A heuristic model of the dynamic of magnetic heading disturbances is then described and added to the observer. The latter is then evaluated in terms of position and heading error on experimental data, showing that in spite of high levels of disturbances, the magnetic field alone can be used to compute heading.

International audience; Few studies have explored how humans memorize landmarks in complex multifloored buildings. They have observed that participants memorize an environment either by floors or by vertical columns, influenced by the learning path. However, the influence of the building's actual structure is not yet known. In order to investigate this influence, we conducted an experiment using an object-in-place protocol in a cylindrical building to contrast with previous experiments which used rectilinear environments. Two groups of 15 participants were taken on a tour with a first person perspective through a virtual cylindrical three-floored building. They followed either a route discovering floors one at a time, or a route discovering columns (by simulated lifts across floors). They then underwent a series of trials, in which they viewed a camera movement reproducing either a segment of the learning path (familiar trials), or performing a shortcut relative to the learning trajectory (novel trials). We observed that regardless of the learning path, participants better memorized the building by floors, and only participants who had discovered the building by columns also memorized it by columns. This expands on previous results obtained in a rectilinear building, where the learning path favoured the memory of its horizontal and vertical layout. Taken together, these results suggest that both learning mode and an environment's structure influence the spatial memory of complex multifloored buildings.

This paper describes the sequence of construction of a cell nuclei classification model by the analysis, the characterization and the classification of shape and texture. We describe first the elaboration of dedicated shape indexes and second the construction of the associated classification submodel. Then we present a new method of texture characterization, based on the construction and the analysis of statistical matrices encoding the texture. The various characterization techniques developed in this paper are systematically compared to previous approaches. In particular, we paid special attention to the results obtained by a versatile classification method using a large range of descriptors dedicated to the characterization of shapes and textures. Finally, the last classifier built with our methods achieved 88% of classification out of the 94% possible.

International audience; Although a number of studies have been devoted to 2-D navigation, relatively little is known about how the brain encodes and recalls navigation in complex multifloored environments. Previous studies have proposed that humans preferentially memorize buildings by a set of horizontal 2-D representations. Yet this might stem from the fact that environments were also explored by floors. Here, we have investigated the effect of spatial learning on memory of a virtual multi-floored building. Two groups of 28 participants watched a computer movie that showed either a route along floors one at a time or travel between floors by simulated lifts, consisting in both cases of a 2-D trajectory in the vertical plane. To test recognition, the participants viewed a camera movement that either replicated a segment of the learning route (familiar segment) or did not (novel segment—i.e., shortcuts). Overall, floor recognition was not reliably superior to column recognition , but learning along a floor route produced a better spatial memory performance than did learning along a column route. Moreover, the participants processed familiar segments more accurately than novel ones, not only after floor learning, but crucially, also after column learning, suggesting a key role of the observation mode on the exploitation of spatial memory.

International audience

ISBN : 978-1-4577-1303-3; International audience; This paper presents significant improvements of Gray Level Size Zone Matrix (GLSZM) which is a bivariate statistical representation of texture, based on the co-occurrences of size/intensity of each flat zone (connected pixels of the same gray level). The first improvement is a multi-scale extension of the matrix which merges various quantizations of gray levels. A second alternative is proposed to take into account radial distribution of zone intensities. The third variant is a generalization of the matrix structure which allows to analyze fibrous textures, by changing the pair intensity/size for the pair length/orientation of each region. The interest of these improved descriptors is illustrated by texture classification problems arising from quantitative cell biology.

This paper present a study on the diagnoses of blood cell nuclei from patients affected by the Progeria disease. Nuclei are characterized with various methods that analyze them shape and texture, and subsequently classify them by learning techniques. These methods extract "measures" from nuclei, which are used for the computation of a set of values named "indexes". These indexes are function bringing up real or discrete values that give information about geometrical, morphological and textural features of nuclei. A description model of nuclei is built based on this data, that is used to classify nuclei.

3D models are often used in order to plan the maintenance of industrial environments.When it comes to the simulation of maintenance interventions, these 3D models have todescribe accurately the actual state of the scenes they stand for. These representationsare usually built from 3D point clouds that are huge set of 3D measurements acquiredin industrial sites, which guarantees the accuracy of the resulting 3D model. Althoughthere exists many works addressing the reconstruction problem, there is no solution toour knowledge which can provide results that are reliable enough to be further used inindustrial applications. Therefore this task is in fact handled by human experts nowadays.This thesis aims at providing a solution automating the reconstruction of industrialsites from 3D point clouds and providing highly reliable results. For that purpose, ourapproach relies on some available a priori knowledge and data about the scene to beprocessed. First, we consider that the 3D models of industrial sites are made of simpleprimitive shapes. Indeed, in the Computer Aided Design (CAD) field, this kind of scenesare described as assemblies of shapes such as planes, spheres, cylinders, cones, tori, . . . Ourown work focuses on planes, cylinders and tori since these three kind of shapes allow thedescription of most of the main components in industrial environment. Furthermore, weset some a priori rules about the way shapes should be assembled in a CAD model standingfor an industrial facility, which are based on expert knowledge about these environments.Eventually, we suppose that a CAD model standing for a scene which is similar to theone to be processed is available. This a priori CAO model typically comes from the priorreconstruction of a scene which looks like the one we are interested in. Despite the factthat they are similar theoretically, there may be significant differences between the sitessince each one has its own life cycle.Our work first states the reconstruction task as a Bayesian problem in which we haveto find the most probable CAD Model with respect to both the point cloud and the a prioriexpectations. In order to reach the CAD model maximizing the target probability, wepropose an iterative approach which improves the solution under construction each time anew randomly generated shape is tried to be inserted in it. Thus, the CAD model is builtstep by step by adding and removing shapes, until the algorithm gets to a local maximumof the target probability., Certaines opérations de maintenance sur sites industriels nécessitent une planification à partir de modèles numériques 3D des scènes où se déroulent les interventions. Pour permettre la simulation de ces opérations, les modèles 3D utilisés doivent représenter fidèlement la réalité du terrain. Ces représentations virtuelles sont habituellement construites à partir de nuages de points relevés sur le site, constituant une description métrologique exacte de l’environnement sans toutefois fournir une description géométrique de haut niveau.Il existe une grande quantité de travaux abordant le problème de la reconstruction de modèles 3D à partir de nuages de points, mais peu sont en mesure de fournir des résultats suffisamment fiables dans un contexte industriel et cette tâche nécessite en pratique l’intervention d’opérateurs humains.Les travaux réalisés dans le cadre de cette thèse visent l’automatisation de la reconstruction,avec comme principal objectif la fiabilité des résultats obtenus à l’issu du processus. Au vu de la complexité de ce problème, nous proposons d’exploiter des connaissances et données a priori pour guider la reconstruction. Le premier a priori concerne la compositiondes modèles 3D : en Conception Assistée par Ordinateur (CAO), les scènes industrielles sont couramment décrites comme des assemblages de primitives géométriques simples telles que les plans, sphères, cylindres, cônes, tores, etc. Nous hiérarchisons l’analyse en traitant dans un premier temps les plans et les cylindres, comme un préalable à la détection de stores. On obtient ainsi une description fiable des principaux composants d’intérêt dans les environnements industriels. Nous proposons en outre d’exploiter un certain nombre de règles régissant la manière dont ces primitives s’assemblent en un modèle CAO, basées surdes connaissances ”métier” caractérisant les scènes industrielles que nous traitons. De plus,nous tirons parti d’un modèle CAO existant d´ecrivant une scène similaire à celle que nous souhaitons reconstruire, provenant typiquement de la reconstruction antérieure d’un site semblable au site d’intérêt. Bien que semblables en théorie, ces scènes peuvent présenterdes différences significatives qui s’accentuent au cours de leur exploitation.La méthode que nous développons se fonde sur une formulation Bayésienne du problème de reconstruction : il s’agit de retrouver le modèle CAO le plus probable vis à visdes différentes attentes portées par les données et les a priori sur le modèle à reconstruire. Les diverses sources d’a priori s’expriment naturellement dans cette formulation. Pour permettre la recherche du modèle CAO optimal, nous proposons une approche basée surdes tentatives d’insertion d’objets générés aléatoirement. L’acceptation ou le rejet de ces objets repose ensuite sur l’am´elioration systématique de la solution en cours de construction. Le modèle CAO se construit ainsi progressivement, par ajout et suppression d’objets, jusqu’à obtention d’une solution localement optimale.