Search

International audience; Analysis of short-to-intermediate range intermolecular interactions offers a great way of characterizing the solid-state organization of small molecules and materials. This can be achieved by two-dimensional (2D) homo- and heteronuclear correlation NMR spectroscopy, for example, by carrying out experiments at high magnetic fields in conjunction with fast magic-angle spinning (MAS) techniques. But, detecting 2D peaks for heteronuclear dipolar coupled spin pairs separated by greater than 3 Å is not always straightforward, particularly when low-gamma quadrupolar nuclei are involved. Here, we present a 2D correlation NMR experiment that combines the advantages of heteronuclear-multiple quantum coherence (HMQC) and proton-based spin-diffusion (SD) pulse sequences using radio-frequency-driven-recouping (RFDR) to probe inter and intramolecular 1H-X (X = 14N, 35Cl) interactions. This experiment can be used to acquire 2D 1H{X}-HMQC filtered 1H–1H correlation as well as 2D 1H-X HMQC spectra. Powder forms of dopamine·HCl and l-histidine·HCl·H2O are characterized at high fields (21.1 T and 18.8 T) with fast MAS (60 kHz) using the 2D HMQC-SD-RFDR approach. Solid-state NMR results are complemented with NMR crystallography analyses using the gauge-including projector augmented wave (GIPAW) approach. For histidine·HCl·H2O, 2D peaks associated with 14N–1H–1H and 35Cl–1H–1H distances of up to 4.4 and 3.9 Å have been detected. This is further corroborated by the observation of 2D peaks corresponding to 14N–1H–1H and 35Cl–1H–1H distances of up to 4.2 and 3.7 Å in dopamine·HCl, indicating the suitability of the HMQC-SD-RFDR experiments for detecting medium-range proximities in molecular solids.

Biominerals are all the minerals produced by living organisms. They are essential materials, present in almost all living species. Nevertheless,the structural, chemical properties and, formation mechanisms and the evolution of these materials are still heavily debated. This is due in particular to thedifficulties of experimentally studying chemical species evolving in biologicalenvironments. Although, equally complex, a theoretical approach at the molecular level can help in the characterization of these biological materialsand in particular the characterization of their interfaces formed with the surrounding biological media. This is essential for a better understandingof the formation and evolution of these minerals.Calcium oxalates are essential biominerals that are very common in the living world. They constitute the main crystalline speciesencountered in kidney stones where they can exist in three phases possessing different degrees of hydration. In this, thesis we carried outsimulations to predict the IR and NMR spectroscopic properties of these three phases. Thsi enabled us to obtain specificsignature of each polyhydrate, and thus makes it possible to obtain a signature specific to each of them, thus helpingthe identification of these phases from the experimentally spectra obtained.Calcium phosphates are part of the bio/biological minerals. They make up the major part of the bone mineral of mammals. This mineral is in the form of nanoparticles havinga crystalline core of hydroxyapatite and a hydrated and disordered surface layer.During this thesis we were interested in these two components. Concerning the crystalline core of the particles, we studied in particularthe case of carbonate substitutions because of its predominant substitution in biological apatites. By combining this work with solid state NMR experimentswe can propose a precise localization of these substituents within the hydroxyapatite crystalline cell.The disordered surface layer is still very poorly understood and many structural models are proposed in the literature to describe it. We haveconsidered a number of them for which we have modeled the NMR properties which were then confronted with experimental results. The comparaisonmade it possible to identify the strengths and weaknesses of the various hypotheses.; On appelle biominéraux l’ensemble des minéraux fabriqués par le vivant. Ce sont des matériaux essentiels, présents dans la quasi-totalitédes espèces vivantes. Néanmoins les caractéristiques structurales, chimiques ainsi que les mécanismes de formation, et l’évolution de cesmatériaux sont encore fortement débattus. Cela s’explique notamment par les difficultés à étudier expérimentalement des espèces chimiquesévoluant en milieux biologiques.Bien que tout aussi complexe, une approche théorique, à l’échelle moléculaire, peut aider à la caractérisation de ces matériaux biologiqueset notamment la caractérisation de leurs interfaces formées avec les milieux biologiques environnants. Cela étant essentiel pour une meilleurecompréhension de la formation et de l’évolution de ces minéraux.Les oxalates de calcium constituent une famille de biominéraux très importante dans le monde du vivant. Ils constituent notamment les principales espèces cristallinesrencontrées dans les calculs rénaux où ils peuvent exister sous trois phases possédant différents degrés d'hydratation. Au cours de cette thèse, nous avons effectuéles simulations des propriétés spectroscopique IR et RMN des ces trois phases, ce qui permet d'obtenir une signature propre à chacune d'entre elle, aidant ainsi àl'identification de ces phases à partir des spectres obtenus expérimentalement.Les phosphates de calcium font aussi partie des biominéraux. Ils composent la majeure partie du minéral osseux des mammifères. Ce minéral se trouvesous la forme de nanoparticules décrites comme possédant un cœur cristallin d’hydroxyapatite substituées entourée d'une couche hydratée et désordonnée en surface.Durant ce travail de thèse, nous nous sommes intéressés à ces deux composantes. Concernant le cœur cristallin des particules, nous avons étudié en particulierle cas des substitutions par des carbonates car il s'agit de la substitution prédominante dans les apatites biologiques. En couplant ce travail à des expériencesde RMN solide nous pouvons proposé une localisation précise de ces substituants au sein de la maille d’hydroxyapatite.La couche désordonnée de surface est encore très mal comprise à l'heure actuelle et de nombreux modèles structuraux sont proposés dans la littérature pour la décrire. Nous avonsconsidéré un certain nombre d'entre eux pour lesquels nous avons modélisé les propriétés RMN, qui confrontées à celle issues de l'expérience nous ontpermis d'identifier les points forts et faibles des différentes hypothèses.

This thesis is devoted to the rationalisation of telluride glasses, with a high applicative potential. Results have been obtained using ab initio molecular dynamics and NMR parameters calculations on different nuclei. In order to validate our glasses models, theoretical results have been compared to available experimental data, as neutron or X-rays scattering structure factors or NMR spectra. The first part describes theoretical methods employed, whereas the two next chapters focus on the use of GIPAW formalism to obtain NMR parameters of 73Ge and 125Te, on crystalline and/or molecular systems. In the case of 125Te, we calibrated a linear function that relates calculated isotropic shielding and isotropic chemical shift. For the 73Ge, we took into account thermal effect to get averaged NMR parameters, by considering several configurations taken from a 300 K molecular dynamics. The next part is a structural study of amorphous GeTe4, where the impact of the size of simulated cells and the functional used, has been analysed. A comparison of theoretical and experimental structure factors, allowed a description of germanium and tellurium first coordination sphere. The comparison of experimental and theoretical 125Te NMR spectra did not disprove these results. Fifth and sixth parts deal with glasses of ternary systems Ge-Se-Te and Ge-Ga-Te. The validation of our models with 77Se, 125Te, 69Ga and 71Ga NMR and structure factors, permitted us to characterize the role of selenium or gallium on glasses structures. Last chapter is dedicated to chalcohalide glasses from the binary system Te-Cl. Solid state NMR, X-rays and neutron diffraction, combined with ab initio calculations, let us make changes in previews suggested structural models., Ce travail de thèse est consacré à la rationalisation de verres de tellure, au fort potentiel applicatif. Les résultats ont été obtenus en utilisant la dynamique moléculaire ab initio et le calcul de paramètres RMN sur différents noyaux. Pour valider nos modèles de verres, les résultats théoriques sont comparés aux données expérimentales disponibles, comme les facteurs de structure neutroniques ou des rayons X, ainsi que les spectres RMN du solide. La première partie décrit les méthodes théoriques employées, tandis que les deux chapitres qui suivent se concentrent sur l’utilisation du formalisme GIPAW pour le calcul des paramètres RMN du 73Ge et du 125Te sur des systèmes cristallins et/ou moléculaires. Dans le cas du 125Te, nous avons calibré une fonction linéaire qui relie l’écrantage isotrope calculé au déplacement chimique isotrope. Pour le 73Ge, nous avons pris en compte des effets thermiques pour obtenir des paramètres RMN moyens, en considérant plusieurs configurations extraites d’une dynamique moléculaire à 300 K. La partie suivante est une étude structurale du verre GeTe4, où l’impact de la taille des cellules modélisées et de la fonctionnelle utilisée, ont été analysés. Une confrontation des facteurs de structure théoriques avec ceux obtenus expérimentalement, permet la description de la première sphère de coordination des tellures et des germaniums. La comparaison des spectres RMN expérimentaux et théoriques du 125Te ne vient pas infirmer ces résultats. Les cinquième et sixième chapitres portent sur l’étude des systèmes ternaires Ge-Te-Se et Ge-Ga-Te. La validation de nos modèles par la RMN des 77Se, 125Te, 69Ga et 71Ga, et par les facteurs de structure, nous a permis de caractériser le rôle du sélénium ou du gallium sur la structuration de ces verres. Le dernier chapitre est consacré à l’étude de verre de chalcohalogénures du système binaire Te-Cl. La RMN du solide, les méthodes de diffractions de neutrons et des rayons X, combinées à des calculs ab initio ont permis de faire évoluer les précédents modèles structuraux proposés.

With the increasing number of organocalcium and organomagnesium complexes under development, there is a real need to be able to characterize in detail their local environment in order to fully rationalize their reactivity. For crystalline structures, in cases when diffraction techniques are insufficient, additional local spectroscopies like 25Mg and 43Ca solid-state NMR may provide valuable information to help fully establish the local environment of the metal ions. In this current work, a prospective DFT investigation on crystalline magnesium and calcium complexes involving low-coordination numbers and N-bearing organic ligands was carried out, in which the 25Mg and 43Ca NMR parameters [isotropic chemical shift, chemical shift anisotropy (CSA) and quadrupolar parameters] were calculated for each structure. The analysis of the calculated parameters in relation to the local environment of the metal ions revealed that they are highly sensitive to very small changes in geometry/distances, and hence that they could be used to assist in the refinement of crystal structures. Moreover, such calculations provide a guideline as to how the NMR measurements will need to be performed, revealing that these will be very challenging.

International audience; 43Ca MQMAS NMR spectra of three silica-based glasses in which Ca2+ ions play different structural roles have been collected and processed in order to extract the underlying NMR parameter distributions. The NMR parameters have been interpreted with the help of molecular dynamics simulations and DFT-GIPAW calculations. This synergetic experimental-computational approach has allowed us to investigate the Ca environment, to estimate Ca coordination numbers from MD-derived models, and to push further the discussion about 43Ca NMR sensitivity to the first and second coordination spheres: 43Ca δiso and Ca-O distance can be successfully correlated as a function of Ca coordination number.

Two hexanuclear niobium halide cluster compounds with a [Nb 6 X 12 ] 2+ (X=Cl, Br) diamagnetic cluster core, have been studied by a combination of experimental solid-state NMR/NQR techniques and PAW/GIPAW calculations. For niobium sites the NMR parameters were determined by using variable B o field static broadband NMR measurements and additional NQR measurements. It was found that they possess large positive chemical shifts, contrary to majority of niobium compounds studied so far by solid-state NMR, but in accordance with chemical shifts of 95 Mo nuclei in structurally related compounds containing [Mo 6 Br 8 ] 4+ cluster cores. Experimentally determined δ iso ( 93 Nb) values are in the range from 2400 to 3000 ppm. A detailed analysis of geometrical relations between computed electric field gradient (EFG) and chemical shift (CS) tensors with respect to structural features of cluster units was carried out. These tensors on niobium sites are almost axially symmetric with parallel orientation of the largest EFG and the smallest CS principal axes ( V zz and δ 33 ) coinciding with the molecular four-fold axis of the [Nb 6 X 12 ] 2+ unit. Bridging halogen sites are characterized by large asymmetry of EFG and CS tensors, the largest EFG principal axis ( V zz ) is perpendicular to the X-Nb bonds, while intermediate EFG principal axis ( V yy ) and the largest CS principal axis ( δ 11 ) are oriented in the radial direction with respect to the center of the cluster unit. For more symmetrical bromide compound the PAW predictions for EFG parameters are in better correspondence with the NMR/NQR measurements than in the less symmetrical chlorine compound. Theoretically predicted NMR parameters of bridging halogen sites were checked by 79/81 Br NQR and 35 Cl solid-state NMR measurements.

International audience; Silicon and aluminium chemical environments in silicate and aluminosilicate glasses with compositions 60SiO(2)center dot 20Na(2)O center dot 20CaO (CSN), 60SiO(2)center dot 20Al(2)O(3)center dot 20CaO (CAS), 78SiO(2)center dot 11Al(2)O(3)center dot 11Na(2)O (NAS) and 60SiO(2)center dot 10Al(2)O(3)center dot 10Na(2)O center dot 20CaO (CASN) have been investigated by Al-27 and Si-29 solid state magic angle spinning (MAS) and multiple quantum MAS (MQMAS) nuclear magnetic resonance (NMR) experiments. To interpret the NMR data, first-principles calculations using density functional theory were performed on structural models of these glasses. These models were generated by Shell-model molecular dynamics (MD) simulations. The theoretical NMR parameters and spectra were computed using the gauge including projected augmented wave (GIPAW) method and spin-effective Hamiltonians, respectively. This synergetic computational-experimental approach offers a clear structural characterization of these glasses, particularly in terms of network polymerization, chemical disorder (i.e. Si and Al distribution in second coordination sphere) and modifier cation distributions. The relationships between the local structural environments and the Si-29 and Al-27 NMR parameters are highlighted, and show that: (i) the isotropic chemical shift of both Si-29 and Al-27 increases of about +5 ppm for each Al added in the second sphere and (ii) both the Al-27 and Si-29 isotropic chemical shifts linearly decrease with the reduction of the average Si/Al-O-T bond angle. Conversely, Al-27 and Si-29 NMR parameters are much less sensitive to the connectivity with triple bridging oxygen atoms, precluding their indirect detection from Al-27 and Si-29 NMR. (C) 2013 Elsevier Ltd. All rights reserved.

International audience; The structures of four Ca-phosphonate phases are reported here: Ca(C6H5-PO3H)2 (1), Ca(C6H5-PO3)*2H2O (2), Ca(C4H9-PO3H)2 (3) and Ca(C4H9-PO3)*H2O (4). Structural models were obtained ab initio by using a combined synchrotron powder diffraction, solid-state nuclear magnetic resonance, and gauge including projector augmented wave (GIPAW) calculation approach. The 1H, 13C, 31P and 43Ca NMR parameters calculated from these structural models were found to be in good agreement with the experimental values, thereby indicating the high accuracy of the DFT-optimized structures. Correlations between the NMR parameters and structural features around the phosphonate were then analyzed, showing in particular the high sensitivity of the 31P asymmetry parameter ηCS and the 43Ca isotropic chemical shift to changes in local structure around the phosphonate groups and the Ca2+, respectively. Finally, the NMR data of a new mixed Na-Ca phosphonate phase, Ca1.5Na(C4H9-PO3)2, are reported.

Boronic acids (R-B(OH)(2)) are a family of molecules that have found a large number of applications in materials science. In contrast, boronate anions (R-B(OH)(3)(-)) have hardly been used so far for the preparation of novel materials. Here, a new crystalline phase involving a boronate ligand is described, Ca[C(4)H(9)-B(OH)(3)](2), which is then used as a basis for the establishment of the spectroscopic signatures of boronates in the solid state. The phase was characterized by IR and multinuclear solid-state NMR spectroscopy ((1)H, (13)C, (11)B and (43)Ca), and then modeled by periodic DFT calculations. Anharmonic OH vibration frequencies were calculated as well as NMR parameters (by using the Gauge Including Projector Augmented Wave--GIPAW--method). These data allow relationships between the geometry around the OH groups in boronates and the IR and (1)H NMR spectroscopic data to be established, which will be key to the future interpretation of the spectra of more complex organic-inorganic materials containing boronate building blocks.

43Ca solid state NMR is comprehensively reviewed up to early 2012. ► The effects of the physical properties of 43Ca for NMR observation are outlined. ► A range of applications especially for inorganic materials are described. ► First principles calculation of NMR parameters is shown to augment experiments. ► Correlations of NMR interactions to local structure (e.g. Ca–O) are examined.

We present a density functional theory based method for calculating NMR shielding tensors for 3d transition metal nuclei using periodic boundary conditions. Calculations employ the gauge-including projector augmented-wave pseudopotentials method. The effects of ultrasoft pseudopotential and induced approximations on the second-order magnetic response are intensively examined. The reliability and the strength of the approach for 49Ti and 51V nuclei is shown by comparison with traditional quantum chemical methods, using benchmarks of finite organometallic systems. Application to infinite systems is validated through comparison to experimental data for the 51V nucleus in various vanadium oxide based compounds. The successful agreement obtained for isotropic chemical shifts contrasts with full estimation of the shielding tensor eigenvalues, revealing the limitation of pure exchange-correlation functionals compared to their exact-exchange corrected analogues., 56 pages