Search

Polymer dielectrics are preferred materials for high-energy-density capacitive energy storage. In particular, high-temperature dielectrics that can withstand harsh conditions, e.g., ≥150 °C, is of crucial importance for advanced electronics and electrical power systems. Herein, high-temperature dielectric polymer composites composed of polyetherimide (PEI) matrix and hafnium oxide (HfO2) nanoparticles are presented. It is found that the incorporation of HfO2 with a moderate dielectric constant and a wide bandgap improves the dielectric constant and simultaneously reduces the high-field leakage current density of the PEI nanocomposites. As a result, the PEI/HfO2 composites exhibit superior energy storage performance to the current high-temperature engineering polymers at elevated temperatures. Specifically, the nanocomposite with 3 vol% HfO2 displays a discharged energy density of 2.82 J/cm3 at 150 °C, which is 77% higher than neat PEI. This work demonstrates the effectiveness of incorporation of the nanofiller with a medium dielectric constant into the polymer on the improvement of high-temperature capacitive properties of the polymer composites.

The development of advanced dielectric materials with high breakdown strength, high dischargeable energy densities, and great efficiencies is imperative to meet the ever-increasing demand of modern power systems and electronic devices. Herein, we present the layer-by-layer solution prepared bilayer-structured nanocomposite films with much enhanced capacitive performance via resolving the typical paradox between dielectric constant and breakdown strength in dielectric materials. The bilayered nanocomposite films are composed of Al2O3 dispersed in polystyrene as the interfacial barrier layer to inhibit electrical conduction and the polystyrene layer with TiO2 to enhance dielectric constant. The resulting layered film exhibits a discharged energy density of 4.43 J/cm3 along with ultrahigh charge−discharge efficiencies of >90%, which is among the highest energy densities ever achieved in the polystyrene-based dielectric polymer nanocomposites. In addition, the composite films show outstanding cyclic stability under high electric fields, which would enable the long-term efficient operation of film capacitors. This contribution represents an efficient route to high-energy-density dielectric composite materials by using interfacial barrier architectures.

The introduction of inorganic components into a polymer matrix to form polymer composites is an emerging and promising approach to dielectric materials for capacitive energy storage. Ferroelectric polymers are particularly attractive as matrices for dielectric polymer composites owing to their highest dielectric constant (≥10) among the known polymers. Here, the important aspects and recent advances in the development of the ferroelectric-polymer-based dielectric polymer composites for high-energy-density capacitor applications are summarized. The preparation methods of ferroelectric-polymer composites with 0D, 1D, and 2D nanostructured fillers, surface-modified nanofillers, and hierarchically structured fillers, and their comprehensive impacts on the dielectric properties, breakdown strength, and energy density of the resulting composites are described. The most recent progress on the incorporation of multiple nanofillers with complementary functionalities into ferroelectric polymers and the design of layer-structured ferroelectric-polymer composites is also highlighted. A discussion of the scientific and technological issues that remain to be addressed and an outlook for the future of ferroelectric polymer-based dielectric composites are also presented.

Lithium enolates derived from carboxylic acids are ubiquitous intermediates in organic synthesis. Asymmetric transformations with these intermediates, a central goal of organic synthesis, are typically carried out with covalently attached chiral auxiliaries. An alternative approach is to utilize chiral reagents that form discrete, well-defined aggregates with lithium enolates, providing a chiral environment conducive of asymmetric bond formation. These reagents effectively act as noncovalent, or traceless, chiral auxiliaries. Lithium amides are an obvious choice for such reagents as they are known to form mixed aggregates with lithium enolates. We demonstrate here that mixed aggregates can effect highly enantioselective transformations of lithium enolates in several classes of reactions, most notably in transformations forming tetrasubstituted and quaternary carbon centers. Easy recovery of the chiral reagent by aqueous extraction is another practical advantage of this one-step protocol. Crystallographic, spectroscopic, and computational studies of the central reactive aggregate, which provide insight into the origins of selectivity, are also reported.

The group 11 hydride clusters [Ag6H4(dppm)4(OAc)2] (1) and [Cu3H(dppm)3(OAc)2] (2) (dppm = 1,1-bis(diphenylphosphino)methane) were synthesized in moderate yields from the reaction of M(OAc) (M = Ag, Cu) with Ph2SiH2, in the presence of dppm. Complex 1 is the first structurally characterized homometallic polyhydrido silver cluster to be isolated. Both 1 and 2 catalyze the hydrosilylation of (α,β-unsaturated) ketones. Notably, this represents the first example of hydrosilylation with an authentic silver hydride complex.

Atomically precise copper nanoclusters (NCs) are of immense interest for a variety of applications, but have remained elusive. Herein, we report the isolation of a copper NC, [Cu25H22(PPh3)12]Cl (1), from the reaction of Cu(OAc) and CuCl with Ph2SiH2, in the presence of PPh3. Complex 1 has been fully characterized, including analysis by X-ray crystallography, XANES, and XPS. In the solid state, complex 1 is constructed around a Cu13 centered-icosahedron and formally features partial Cu(0) character. XANES of 1 reveals a Cu K-edge at 8979.6 eV, intermediate between the edge energies of Cu(0) and Cu(I), confirming our oxidation state assignment. This assignment is further corroborated by determination of the Auger parameter for 1, which also falls between those recorded for Cu(0) and Cu(I).

The copper hydride clusters [Cu14 H12 (phen)6(PPh3)4][X]2 (X=Cl or OTf; OTf=trifluoromethanesulfonate, phen=1,10-phenanthroline) are obtained in good yields by the reaction of [(Ph3P)CuH]6 with phen, in the presence of a halide or pseudohalide source. The complex [Cu14H12 (phen)6(PPh3)4][Cl]2 reacts with CO2 in CH2Cl2 , in the presence of excess Ph3 P, to form the formate complex [(Ph3P)2Cu(κ(2)-O2CH)], along with [(phen)(Ph3 P)CuCl].

The copper hydride clusters [Cu14 H12 (phen)6(PPh3)4][X]2 (X=Cl or OTf; OTf=trifluoromethanesulfonate, phen=1,10-phenanthroline) are obtained in good yields by the reaction of [(Ph3P)CuH]6 with phen, in the presence of a halide or pseudohalide source. The complex [Cu14H12 (phen)6(PPh3)4][Cl]2 reacts with CO2 in CH2Cl2 , in the presence of excess Ph3 P, to form the formate complex [(Ph3P)2Cu(κ(2)-O2CH)], along with [(phen)(Ph3 P)CuCl].

The reactivity of MCl3(η(1)-TEMPO) (M = Fe, 1; Al, 2; TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl) with a variety of alcohols, including 3,4-dimethoxybenzyl alcohol, 1-phenyl-2-phenoxyethanol, and 1,2-diphenyl-2-methoxyethanol, was investigated using NMR spectroscopy and mass spectrometry. Complex 1 was effective in cleanly converting these substrates to the corresponding aldehyde or ketone. Complex 2 was also able to oxidize these substrates; however, in a few instances the products of overoxidation were also observed. Oxidation of activated alkanes, such as xanthene, by 1 or 2 suggests that the reactions proceed via an initial 1-electron concerted proton-electron transfer (CPET) event. Finally, reaction of TEMPO with FeBr3 in Et2O results in the formation of a mixture of FeBr3(η(1)-TEMPOH) (23) and [FeBr2(η(1)-TEMPOH)]2(μ-O) (24), via oxidation of the solvent, Et2O.