Search

Purpose: The purpose of this paper is to analyze electromagnetic performance and develop an analytical approach to find the suitable coil combination and no-load flux linkage of the proposed hybrid excited consequent pole flux switching machine (HECPFSM) while minimizing the drive storage and computational time which is the main problem in finite element analysis (FEA) tools. Design/methodology/approach: First, a new HECPFSM based on conventional consequent pole flux switching permanent machine (FSPM) is proposed, and lumped parameter magnetic network model (LPMNM) is developed for the initial analysis like coil combination and no-load flux linkage. In LPMNM, all the parts of one-third machine are modeled which helps in reduction of drive storage, computational complexity and computational time without affecting the accuracy. Second, self and mutual inductance are calculated in the stator, and dq-axis inductance is calculated using park transformation in the rotor of the proposed machine. Furthermore, on-load performance analysis, like average torque, torque density and efficiency, is done by FEA. Findings: The developed LPMNM is validated by FEA via JMAG v. 19.1. The results obtained show good agreement with an accuracy of 96.89%. Practical implications: The proposed HECPFSM is developed for high-speed brushless AC applications like electric vehicle (EV)/hybrid electric vehicle (HEV). Originality/value: The proposed HECPFSM offers better flux regulation capability with enhanced electromagnetic performance as compared to conventional consequent pole FSPM. Moreover, the developed LPMNM reduces drive storage and computational time by modeling one-third of the machine. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to propose a two-dimensional (2-D) hybrid analytical model (HAM) in polar coordinates, combining a 2-D exact subdomain (SD) technique and magnetic equivalent circuit (MEC), for the magnetic field calculation in electrical machines at no-load and on-load conditions. Design/methodology/approach: In this paper, the proposed technique is applied to dual-rotor permanent magnet (PM) synchronous machines. The magnetic field is computed by coupling an exact analytical model (AM), based on the formal resolution of Maxwell's equations applied in subdomains, in regions at unitary relative permeability with a MEC, using a nodal-mesh formulation (i.e. Kirchhoff's current law), in ferromagnetic regions. The AM and MEC are connected in both directions (i.e. r- and theta-edges) of the (non-)periodicity direction (i.e. in the interface between teeth regions and all its adjacent regions as slots and/or air-gap). To provide accurate solutions, the current density distribution in slot regions is modeled by using Maxwell's equations instead to MEC and characterized by an equivalent magnetomotive force (MMF) located in the slots, teeth and yoke. Findings: It is found that whatever the iron core relative permeability, the developed HAM gives accurate results for both no-load and on-load conditions. Finite element analysis demonstrates the excellent results of the developed technique. Originality/value: The main objective of this paper is to achieve a direct coupling between the AM and MEC in both directions (i.e. r- and theta-edges). The current density distribution is modeled by using Maxwell's equations instead to MEC and characterized by an MMF. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to propose an improved two-dimensional hybrid analytical method (HAM) in Cartesian coordinates, based on the exact subdomain technique and the magnetic equivalent circuit (MEC). Design/methodology/approach: The magnetic field solution is obtained by coupling an exact analytical model (AM), calculated in all regions having relative permeability equal to unity, with a MEC, using a nodal-mesh formulation (i.e. Kirchhoff's current law) in ferromagnetic regions. The AM and MEC are connected in both axes (x, y) of the (non-)periodicity direction (i.e. in the interface between the tooth regions and all its adjacent regions as slots and/or air-gap). To provide accuracy solutions, the current density distribution in slot regions is modeled by using Maxwell's equations instead of the MEC characterized by an equivalent magnetomotive force (MMF) located in slots, teeth and yokes. Findings: It is found that whatever the iron core relative permeability, the developed HAM gives accurate results for no- and on-load conditions. The finite-element analysis demonstrates excellent results of the developed technique. Originality/value: The main objective of this paper is to make a direct coupling between the AM and MEC in both directions (i.e. x- and y-edges). The current density distribution is modeled by using Maxwell's equations instead of the MEC and characterized by an MMF. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to reviewed analytical methodologies, i.e. lumped parameter magnetic equivalent circuit (LPMEC), magnetic co-energy (MCE), Laplace equations (LE), Maxwell stress tensor (MST) method and sub-domain modelling for design of segmented PM(SPM) consequent pole flux switching machine (SPMCPFSM). Electric machines, especially flux switching machines (FSMs), are accurately modeled using numerical-based finite element analysis (FEA) tools; however, despite of expensive hardware setup, repeated iterative process, complex stator design and permanent magnet (PM) non-linear behavior increases computational time and complexity. Design/methodology/approach: This paper reviews various alternate analytical methodologies for electromagnetic performance calculation. In above-mentioned analytical methodologies, no-load phase flux linkage is performed using LPMEC, magnetic co-energy for cogging torque, LE for magnetic flux density (MFD) components, i.e. radial and tangential and MST for instantaneous torque. Sub-domain model solves electromagnetic performance, i.e. MFD and torque behaviour. Findings: The reviewed analytical methodologies are validated with globally accepted FEA using JMAG Commercial FEA Package v. 18.1 which shows good agreement with accuracy. In comparison of analytical methodologies, analysis reveals that sub-domain model not only get rid of multiples techniques for validation purpose but also provide better results by accounting influence of all machine parts which helps to reduce computational complexity, computational time and drive storage with overall accuracy of ∼99%. Furthermore, authors are confident to recommend sub-domain model for initial design stage of SPMCPFSM when higher accuracy and low computational cost are primal requirements. Practical implications: The model is developed for high-speed brushless AC applications. Originality/value: The SPMCPFSM enhances electromagnetic performance owing to segmented PMs configuration which makes it different than conventional designs. Moreover, developed analytical methodologies for SPMCPFSM reduce computational time compared with that of FEA. [ABSTRACT FROM AUTHOR]

Purpose Consideration of leakage fluxes in the preliminary design stage of a machine is important for accurate determination of machine dimensions and prediction of performance characteristics. This paper aims to obtain some equations for calculating the average air gap flux density, the flux density within the magnet and the air gap leakage flux factor.Design/methodology/approach A detailed magnetic equivalent circuit (MEC) is presented for a TORUS-type non-slotted axial flux permanent magnet (TORUS-NS AFPM) machine. In this MEC, the leakage flux occurring between two adjacent magnets and the leakage fluxes taking place between the magnet and rotor iron at the interpolar, inner and outer edges of the magnets are considered. According to the proposed MEC and by using flux division law, some equations are extracted. A three-dimensional finite element method (FEM) is used to evaluate the proposed analytical equations. The study machine is a 3.7 kW and 1,400 rpm TORUS-NS AFPM machine.Findings The air gap leakage flux factor, the average air gap flux density and the flux density within the magnet are calculated using the proposed equations and FEM. All the results of FEM confirm the excellent accuracy of the proposed analytical method.Originality/value The new equations presented in this paper can be applied for leakage flux evaluating purposes. [ABSTRACT FROM AUTHOR]