Search

This study investigated the effect of microencapsulation on the survival of Lactobacillus rhamnosus GG and Lactobacillus acidophilus NCFM and their acidification in orange juice at 25°C for nine days and at 4°C over thirty five days of storage. Alginate micro beads (10-40 μm) containing the probiotics were produced by a novel dual aerosol method of alginate and CaCl(2) cross linking solution. Unencapsulated L. rhamnosus GG was found to have excellent survivability in orange juice at both temperatures. However unencapsulated L. acidophilus NCFM showed significant reduction in viability. Encapsulation of these two bacteria did not significantly enhance survivability but did reduce acidification at 25°C and 4°C. In agreement with this, encapsulation of L. rhamnosus GG also reduced acidification in pear and peach fruit-based foods at 25°C, however at 4°C difference in pH was insignificant between free and encapsulated cells. In conclusion, L. rhamnosus GG showed excellent survival in orange juice and microencapsulation has potential in reducing acidification and possible negative sensory effects of probiotics in orange juice and other fruit-based products., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Microporous, poly(epsilon-caprolactone) (PCL) matrices were loaded with progesterone by precipitation casting using co-solutions of PCL and progesterone in acetone. Progesterone loadings up to 32% w/w were readily achieved by increasing the drug content of the starting PCL solution. The kinetics of steroid release in PBS at 37 degrees C over 10 days could be described effectively by a diffusional release model although the Korsmeyer-Peppas model indicated the involvement of multiple release phenomena. The diffusion rate constant (D) increased from 8 to 24 microg/mg matrix/day0.5 as the drug loading increased from 3.6 to 12.4% w/w. A total cumulative release of 75%-95% indicates the high efficiency of steroid delivery. Increasing the matrix density from 0.22 to 0.39 g/cm3, by increasing the starting PCL solution concentration, was less effective in changing drug release kinetics. Retention of anti-proliferative activity of released steroid was confirmed using cultures of breast cancer epithelial (MCF-7) cells. Progesterone released from PCL matrices into PBS at 37 degrees C over 14 days retarded the growth of MCF-7 cells by a factor of at least 3.5 compared with progesterone-free controls. These findings recommend further investigation of precipitation-cast PCL matrices for delivery of bioactive molecules such as anti-proliferative agents from implanted, inserted or topical devices.

The development of diagnostic tests to differentiate between vaccinated animals and those infected with Mycobacterium bovis is required so that test and slaughter control strategies can continue alongside vaccination. In this work, the peptide antigen, ESAT-6, p45, derived from the N-terminal sequence of the ESAT-6 protein, was adsorbed onto a range of microparticulate and nanoparticulate substrates to enhance the in vitro immune response of blood lymphocytes previously sensitised to M. bovis. Two types of hydroxyapatite (HA) nanoparticles (both approximately 300 nm in linear dimension), carbonate hydroxyapatite nanospheres (CHA, approximately 50 nm), two sizes of polystyrene nanospheres ( approximately 500 and 40 nm), calcium carbonate microparticles (0.3-1.0 microm) and glass microspheres (1.0-3.0 microm) were incubated in a solution of the peptide in PBS. Peptide adsorption increased on the nanoparticle carriers in the order HA (2.5+/-0.12%w/w), CHA (4.9+/-0.12) polystyrene (500 nm, 6.8+/-0.15%, 40 nm, 9.2+/-0.07) and these systems exhibited fairly low levels of desorption (approximately 10-15% peptide release) over a 24-h incubation period in PBS at 37 degrees C. HA, CHA and polystyrene carriers with adsorbed peptide were subsequently tested in the BOVIGAM assay to investigate the efficiency of the immune response of blood lymphocytes in terms of interferon-gamma (IFN-gamma) production. A general elevation of IFN-gamma production resulted for particle-bound peptide relative to free peptide at high peptide concentrations (>10 microg/ml). Only HA-adsorbed peptide resulted in consistently higher immune responses at low peptide concentration (<0.1 microg/ml) compared with the free peptide, indicating that peptide antigens adsorbed to hydroxyapatite nanoparticles may be useful, in diagnostic assays, for differentiating between tuberculosis (TB)-infected and vaccinated animals.

Poly (DL-lactide co-glycolide) (PLG) microspheres with mean sizes up to 1 microm containing Fluorescein Isothiocyanate labelled Bovine Serum Albumin (FITC-BSA) were prepared by the water-in oil-in water (w/o/w) emulsion solvent evaporation technique. Protein loading and loading efficiency determined by the BCA total protein assay increased with microsphere size as measured by laser diffractometry. Protein loaded microspheres were analysed using flow cytometry (FC) to provide fast and reproducible measurements of the size and protein loading of individual microspheres within a sample thereby quantifying in detail the batch heterogeneity. The FC analysis demonstrated that as the size of individual microspheres within a batch increased, so the protein loading tended to increase. For example, the protein loading of microspheres increased from 2.7 to 8.9 wt.% as the size of microspheres increased from 0.42 to 1.45 microm, respectively. Measurements taken during a subsequent protein release experiment indicated that smaller microspheres within a sample released their protein more quickly than larger sizes. Flow cytometry has been shown to provide detailed information, at the level of individual microspheres, about the heterogeneity in size and protein loading of a microsphere sample and could thus lead to improvement of the release characteristics of microsphere-based delivery systems for biopharmaceuticals.

The surface chemical characterisation of sub-200 nm poly(DL-lactide co-glycolide) nanospheres has been carried out using the complementary analytical techniques of static secondary ion mass spectrometry (SSIMS) and X-ray photoelectron spectroscopy (XPS). The nanospheres, which are of interest for site-specific drug delivery, were prepared using an emulsification-solvent evaporation technique with poly(vinyl alcohol), Poloxamer 407 and Poloxamine 908 respectively as stabilisers. The presence of surfactant molecules on the surface of cleaned biodegradable colloids was confirmed and identified on a qualitative molecular level (SSIMS) and from a quantitative elemental and functional group analysis (XPS) perspective. SSIMS and XPS data were also used in combination with electron microscopy to monitor the effectiveness of cleaning procedures in removing poorly bound surfactant molecules from the surface of nanospheres. The findings are discussed with respect to the development of nanoparticle delivery systems, particularly the composition of the surface for extending blood circulation times and achieving site-specific deposition.

Poly(DL-lactide co-glycolide) microparticles below 5 microm in size and containing ovalbumin (OVA), were prepared using the water-in oil-in water (w/o/w) technique with either polyvinyl alcohol (PVA) or polyvinylpyrrolidone (PVP) as stabilisers in the external aqueous phase. PVP-stabilised microparticles exhibited higher protein loading (8.2%, w/w relative to 4.0% for PVA stabilised microparticles) and increased core loading (encapsulation) of protein (70% vs. 30% for the PVA system). The use of PVP instead of PVA to prepare microparticles also resulted in reduction in the initial burst release of OVA, together with sustained protein release over 28 days and an increase in the protein delivery capacity from 35 to 45 microg/mg particles. The changes in protein loading and delivery characteristics are considered to arise in part from an increase in the viscosity of the droplets of polymer solution, constituting the primary water-in oil emulsion, by diffusion of PVP from the external aqueous phase. Variation of the external aqueous phase surfactant provides a promising approach for improving the loading of therapeutic proteins and vaccine antigens within biodegradable microparticles and for modulating their release pattern.

Poly(lactide co-glycolide) (PLG) microparticles with a mean size of less than 2 microns, prepared by the water-in oil-in water method, exhibited a maximum surface protein (ovalbumin) content in excess of 50% of the total loading. The surface-core distribution was found to be sensitive to stabiliser concentration and the type of albumin used in the formulation. The degradation of OVA was monitored following incubation of microparticles for 14 days in PBS and for 2 h in simulated gastric and intestinal fluids, respectively. OVA removed from the surface of particles, following incubation in PBS, was found to be intact as measured by SDS-PAGE. After 7 days in PBS at 37 degrees C, protein extracted from the microparticles was found to be partly hydrolysed with the prevalence of an antigen fragment at 36.1 kDa. The relative amount of intact OVA in 50:50 PLG microparticles decreased more rapidly than in the slower degrading 75:25 PLG microparticles. Importantly, the degradation of extracted OVA over 14 days was similar for microparticles incubated either with regular changes of release medium or in a dialysis tube. Almost all the OVA encapsulated in PLG microparticles remained intact after incubation in simulated gastric and intestinal media for 2 h. In contrast, the surface protein was rapidly degraded by trypsin and pepsin and was not detected by SDS-PAGE.