Search

The increased production and expanding demand for cellulosic products have required companies to provide solutions for the proper disposal of generated residues without compromising soil quality. In this context, the current research aimed at evaluating the ecotoxicological impacts of dregs application in subtropical soils. The experiments were carried out with the earthworm Eisenia andrei, the springtail Folsomia candida, and the potworm Enchytraeus crypticus in two subtropical soils (Neosol and Cambisol) collected in the southern region of Brazil. The considerable differences in texture and organic matter content motivated the choosing of these soils. The reproductive rate of all organisms was influenced, with varying EC 50 values depending on the soil type. However, more pronounced effects were observed for Neosol. The springtail F. candida proved to be the most sensitive to contamination (EC 50  = 5.8 g kg -1 for Neosol and 48.5 g kg -1 for Cambisol), followed by the earthworm E. andrei (EC 50  = 62.4 g kg -1 for Neosol and 129.5 g kg -1 for Cambisol) and the potworm E. crypticus (EC 50  = 67.2 g kg -1 for Neosol and 230.4 g kg -1 for Cambisol). As a result, while dregs can be used to correct soil acidity, they have been shown to have negative effects on important organisms responsible for functions critical to maintaining ecosystem quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Non-targeted analysis and suspect screening of per- and polyfluoroalkyl substances (PFAS) in various matrices have gained traction with advancements in accurate mass analytical instruments. This study employed ultra-high performance liquid chromatography coupled to quadrupole orbitrap high-resolution mass spectrometry for PFAS suspect screening of paper grades used in the paper recycling chain. The samples were prepared using two extraction techniques; selective accelerated solvent extraction with weak anionic exchange solid-phase extraction and non-selective ultrasonic-assisted extraction. A suspect screening protocol was established to tentatively identify suspected PFAS against spectral databases using a systematic approach of peak filtering and study-specific thresholds for reporting, linked to a confidence level. The possible prevalence of previously unreported PFAS in several paper materials across the various collection sites in the paper recycling chain was inferred by the common detection of short-chain polyfluoroalkyl ketones and diketones in the paper recycling chain. The suspect screening tentatively identified 41 unique PFAS, with 3 common to both pre-treatment techniques. The detection of unique PFAS by the two sample pre-treatment techniques highlighted the significance of both selective and non-selective extraction in PFAS screening endeavours. Further, it showed the importance of understanding the acquisition mechanisms employed in mass spectrometry where data-dependent acquisition triggered fragmentation in certain identified compounds, and not in others. The tentatively identified PFAS indicated that there were several previously unreported PFAS in the paper recycling chain and that additional studies were required to investigate their abundance, possible persistence, bioaccumulation and toxicity, in relation to their functional groups and carbon chains., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Nondumiso Mofokeng reports funding was provided by Mpact Operations Pty (Ltd). All other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The present study employed powdered activated coke (PAC) for the adsorptive removal of refractory COD from the bio-treated paper wastewater (BTPW). The adsorption reached equilibrium after 3 h, resulting in a decrease in the COD concentration from 98.9 mg L -1 in BTPW to 42.6 mg L -1 when utilizing a PAC dosage of 5 g L -1 . The dominant fractions of dissolved organic matter in BTPW were hydrophilic acids (HIA), hydrophilic neutrals (HIN), and hydrophobic acids (HOA), accounting for 48.8%, 34.2%, and 17.0% of the total dissolved organic carbon, respectively. Three fractions were all predominantly composed of humic/fulvic acid-like substances, while the HOA fraction exhibited highest susceptibility to adsorption by PAC, followed by the HIA and HIN fractions. FT-ICR MS data revealed PAC preferentially adsorbed the unsaturated and oxygen-rich substances containing more carboxyl groups. Additionally, the spent PAC was regenerated through ozonation and subsequently utilized in the adsorption cycles. The regeneration was successfully conducted under an ozone concentration of 1 mg L -1 for a duration of 10 min, and the regeneration efficiency remained about 87.0% even after undergoing five-cycle of adsorption-regeneration. The findings of this study demonstrate that PAC adsorption is a viable and efficacious treatment technology for efficiently removing refractory COD from BTPW., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Anaerobic digestion of floated paperboard sludge (PS) cake suffers from volatile fatty acids (VFAs) accumulation, nutrient unbalanced condition, and generation of digestate with a risk of secondary pollution. To overcome these drawbacks, sewage sludge (SS) was added to PS cake for biogas recovery improvement under a co-digestion process followed by the thermal treatment of solid fraction of digestate for biochar production. Batch experimental assays were conducted at different SS:PS mixing ratios of 70:30, 50:50, 30:70, and 20:80 (w/w), and their anaerobic co-digestion performances were compared to the mono-digestion systems at 35 ± 0.2 °C for 45 days. The highest methane yield (MY) of 241.68 ± 14.81 mL/g COD removed was obtained at the optimum SS:PS ratio of 50:50 (w/w). This experimental condition was accompanied by protein, carbohydrate, and VFA conversion efficiencies of 47.3 ± 3.2%, 46.8 ± 3.2%, and 56.3 ± 3.8%, respectively. The synergistic effect of SS and PS cake encouraged the dominance of Bacteroidota (23.19%), Proteobacteria (49.65%), Patescibacteria (8.12%), and Acidovorax (12.60%) responsible for hydrolyzing the complex organic compounds and converting the VFAs into biomethane. Further, the solid fraction of digestate was subjected to thermal treatment at a temperature of 500 °C for 2.0 h, under an oxygen-limited condition. The obtained biochar had a yield of 0.48 g/g dry digestate, and its oxygen-to-carbon (O/C), carbon-to-nitrogen (C/N), and carbon-to-phosphorous (C/P) ratios were 0.55, 10.23, and 16.42, respectively. A combined anaerobic co-digestion/pyrolysis system (capacity 50 m 3 /d) was designed based on the COD mass balance experimental data and biogenic CO 2 market price of 22 USD/ton. This project could earn profits from biogas (12,565 USD/yr), biochar (6641 USD/yr), carbon credit (8014 USD/yr), and COD shadow price (6932 USD/yr). The proposed project could maintain a payback period of 6.60 yr. However, further studies are required to determine the associated life cycle cost model that is useful to validate the batch experiment assumptions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The large use and emission of p-nitrophenol (p-NP) seriously pollute the environment and endanger human health. In this work, a hydrazone-linked fluorescent covalent organic framework (BATHz-COF) was simply synthesized at room temperature and covalently linked N-acetyl-L-cysteine (NALC) via the "thiol-ene" click reaction, where carboxyl groups were introduced to improve dispersion and fluorescence intensity. As a rapid, good selectivity and reusability fluorescence sensor, the obtained COF-NALC has been used for quantitative analysis of p-NP predicated on the internal filtering effect (IFE). Under optimal conditions, COF-NALC enabled quantitative detection of p-NP with a linear range of 5-50 μM and the detection limit was 1.46 μM. The application of COF-NALC to the detection of p-NP in river water samples was successful, and the satisfactory recoveries were 98.0%-109.3%. Furthermore, the fluorescent COF paper chips constructed by in situ growth were combined with a smartphone to build a visual platform for the quick and real-time detection of p-NP, providing an excellent illustration for the development of intelligent fluorescence sensing in environmental analysis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The deinking in the paper industry is in great demand, and microbial enzymes are key players. In the present study, the endoglucanase production from newly isolated fungi Aspergillus niger MPS25 is reported. The optimization of endoglucanase production was carried out using one factor at a time approach resulting in endoglucanase activity (2.37 IU/ml) at 45 °C and pH 8 in submerged fermentation (SmF), which shows optimum enzyme activity at 60 °C. Interestingly, the metal ions viz. Co 2+ stimulated the endoglucanase activity, whereas Mn 2+ reduced the enzyme activity, which shows that this enzyme can be used for effluent treatment released through deinking. The enzymatic hydrolysis of wheat straw produced 26.96 ± 0.108 mg/g of reducing sugars, indicating its potential in saccharification and the biofuel industry. Furthermore, the validation of the deinking efficiency of this enzyme resulted in improved deinking of mixed office waste and old newspapers by 31.5% and 20.4%, respectively. The strength properties, viz. burst factor and tear index, breaking length, and tensile index of the handmade paper sheets, were also improved which were analyzed by the scanning electron micrographs. The FTIR and XRD analysis of pulp provided insights into the changes in functional groups and cellulose crystallinity, respectively. These results indicate that multi-efficient endoglucanase from Aspergillus niger MPS25 is suitable for enzyme-based eco-friendly deinking for waste paper recycling and lignocellulosic biomass saccharification., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Aim of this research was to treat the organics enriched Paper and Pulp Industry (PPI) effluents using multi-metal tolerant predominant indigenous bacterial species. In addition, assessing the potential of treated bacterial biomass as a single cell protein (SCP). The multi-metal tolerant Streptomyces tuirus OS1 was enumerated from the Paper and Pulp Industry (PPI) effluents was identified through standard molecular characterization. S. tuirus OS1 proficiently ameliorated organic contaminants in PPI effluent in the in study at 35 °C, 45 °C, and 25 °C. Fortunately, the S. tuirus OS1 considerably increased the dissolved oxygen level in treated PPI effluent in 30 days of bioremediation process. Interestingly, at 35 °C of bioremediation process the S. tuirus OS1 demonstrated increased dried biomass (7.1 g L -1 ) with the total crude protein (SCP) as 5.3 g L -1 (78.79%) in 30 days of bioremediation process. These findings suggest that S. tuirus OS1 is capable of reducing organic pollutants in PPI effluents and producing biomass with enriched protein content., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Due to the presence of various organic contaminants, improper disposal of pulp-paper wastewater poses harm to the environment and human health. In this work, pulp-paper sludge (PPS) after secondary treatment were collected from M/s Century Pulp-paper Mills in India, the chemical nature of the organic pollutants was determined after solvent extraction. All the isolates were able to produce lipase (6.34-3.93 U ml -1 ) which could account for the different fatty acids detected in the PPS. The dominant strains were in the classes of α and γ Proteobacteria followed by Firmicutes. The Shannon-Weiner diversity indexes for phylotype richness for the culturable and non-culturable bacterial community were 2.01 and 3.01, respectively, indicating the non-culturable bacterial strains has higher species richness and diversity compared to the culturable bacterial strains. However, the culturable strains had higher species evenness (0.94 vs 0.90). Results suggested only a few isolated strains were resistant to the POPs in the PPS, where as non-cultural bacteria survived by entering viable but non-cultural state. The isolated strains (Brevundimonas diminuta, Aeromonas punctata, Enterobacter hormaechei, Citrobacter braakii, Bacillus pumilus and Brevundimonas terrae) are known for their multidrug resistance but their tolerance to POPs have not previously been reported and deserved further investigation. The findings of this research established the presence of POPs which influence the microbial population. Tertiary treatment is recommended prior to the safe disposal of pulp paper mill waste into the environment., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Paper has become the basic elixir in everyone's activities and usage of paper has increased day by day, the waste generated by paper is also enormous. The primary source of paper is wood (tree) yet, waste paper is environmentally good and biodegradable; however, it is the primary source of deforestation. Current research aims to find an alternate way to recycle paper in the biological approach. Hence in our work, twelve cellulose-producing bacteria were isolated, out of which one bacterial strain proved to be the best. Cellulase enzyme was extracted and purified, and used for enzymatic de-inking of photocopy papers. The optimal conditions for cellulase synthesis were at 60 °C, glucose as the only carbon source, and potassium nitrate as the nitrogen source. The enzyme demonstrated excellent de-inking at a lower pulp consistency of 3% with a 20% enzyme dose. The cellulose and hemicellulose levels decreased, which can be attributed to fiber breaking. Further, the changes in the functional groups identified by Fourier-transform infrared spectroscopy analysis and the changes in the surface morphology of the pulp fibers were obtained using scanning electron microscope analysis., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The article presents the research results of the oxidation of watered toxic waste from the pulp and paper industry (sludge-lignin, the empirical formula of organic matter CH 1.51 N 0.05 S 0.03 Cl 0.01 O 0.54 ) in supercritical water-oxygen (SCW/O 2 ) fluid. The experiments were carried out using a flow tube reactor at a pressure of 25 MPa, temperature gradient along its vertical axis (from top to bottom: 390-600 °C), sludge-lignin flow rate of 9.5-14.5 g/min, oxygen ratio OR = 0.73-2.52, using NaOH (1.6 wt%) as a catalyst. Employing gas chromatography - mass spectrometry, polychlorophenols were identified in the composition of sludge-lignin, in which 2,4,6-trichlorophenol was the main component. The total yield of extracted phenols and chlorophenols per sludge-lignin organic matter was 20.82 and 2.88 μg/g, respectively. It is revealed that the conversion rate of sludge-lignin in SCW/O 2 fluid is limited by heterogeneous oxidation of the carbonized residue, and is determined by the O 2 content in the reaction mixture. At OR ≥ 1.16, only CO 2 , CO, N 2 , and N 2 O were detected in the volatile oxidation products. An increase in OR from 0.73 to 2.52 leads to a decrease in the total content of phenols (from 45540.1 to 129.3 μg/dm 3 ) and chlorophenols (from 51.4 to 2.2 μg/dm 3 ) in the water collected at the reactor outlet. It is shown that 2,6-dichlorophenol and 2-chlorophenol are the most resistant to oxidation. From the analysis of the initial sludge-lignin and mineral residues, it follows that the bulk of the chlorine contained in its organic matter is converted into NaCl in the course of oxidation., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

In this study, silver release from commercially available food-contact materials in food simulants (water, acetic acid, ethanol-water and olive oil) and meats (tuna, ham, and turkey) was assessed. Additionally, the antimicrobial capacity of migrated silver was examined in meats. Largest silver release was observed in simulants from food touch papers (25 ± 11 mg/kg) as compared to bag, cutting board and containers. Silver ion and silver nanoparticles were released from food touch paper in food simulants. Food touch paper released the highest amount of silver in tuna (0.5 ± 0.02 mg/kg) than ham (0.2 ± 0.08 mg/kg) or turkey (0.3 ± 0.08 mg/kg) in the same conditions. Tuna exhibited the lowest pH and higher number of bacterial populations on day 0 compared with other foods. Nonetheless, a significant antibacterial capacity of released silver was noticed predominantly in turkey for Gram-negative bacteria. Our study suggests silver released in food simulants indicate an overestimation of silver migration; thus, precaution should be maintained when extrapolating such findings to "real" food. Moreover, further investigations are needed to determine if the amount of silver released from food touch paper in certain foods (for example turkey in the present study) possess any risk to human health., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Bisphenol A (BPA) is widely used in industrial products. Due to the toxicity of this compound, and to comply with restrictions and regulations, manufacturers have progressively replaced it by substitutes. One of the main substitutes used is bisphenol S (BPS). Despite increasing use in many products, the effects of BPS on human health have been little investigated, and studies on percutaneous BPS absorption and particularly toxicokinetic data are lacking. However, the endocrine-disrupting activity of BPA and BPS appears comparable. Dermal contact is a significant source of occupational exposure and is the main route during handling of bisphenol-containing receipts by cashiers. Here, percutaneous BPS absorption was investigated and compared to that of BPA. Experiments were performed according to OECD guidelines. Test compounds dissolved in a vehicle - acetone, artificial sebum or water - were applied in vitro to fresh human skin samples in static Franz diffusion cells. Flux, cumulative absorbed dose and distribution of dose recovered were measured. BPA absorption was vehicle-dependent ranging from 3% with sebum to 41% with water. BPS absorption was much lower than BPA absorption whatever the vehicle tested (less than 1% of applied dose). However, depending on the vehicle 20% to 47% of the applied BPS dose remained in the skin, and was consequently potentially absorbable. Both BPA and BPS were mainly absorbed without biotransformation. Taken together, these results indicate that workers may be exposed to BPS through skin when handling products containing it. This exposure is of concern as its toxicity is currently incompletely understood., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

A novel adsorbent, the uniform fiber ball (UFB) loaded with polypyrrole (UFB-PPy), was synthesized for Cr(VI) removal from water in this paper. The structure of the UFB and UFB-PPy were characterized by SEM, EDS, FT-IR, BET, XPS and TG. The adsorption properties of UFB-PPy towards Cr(VI) were investigated by the effects of temperature, initial concentration of Cr(VI), interfering ions and contact time in batch experiments, the isothermal models (Langmuir, Freundlich and Temkin) and the kinetic models (Pseudo first-order kinetic, Pseudo second-order kinetic and Intra-particle diffusion models) were used to describe the adsorption behavior. The effects of the initial concentration and flow rate of the Cr(VI) solution in the column experiments were also studied, and the dynamic models (Yoon-Nelson, Adams-Bohart and Wolborska model) were applied to predict the adsorption performance. The Cr(VI) removal mechanism of UFB-PPy was revealed by studying the effect of pH on adsorption, testing of Cl - , and analyzing the XPS. The results showed that UFB-PPy exhibited excellent adsorption properties for Cr(VI) both in batch and column adsorption. The possible adsorption mechanism involved electrostatic attraction, ion exchange and reduction. Conveniently, the chromium resources can be recovered with the form of high-purity Cr 2 O 3 by simple calcination of Cr(VI)-captured UFB-PPy (UFB-PPy-Cr)., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The article reviews the transition from bleaching kraft pulp with elemental chlorine to bleaching with chlorine dioxide with respect to formation of chlorinated dioxins and furans (PCDD/Fs). New data is also presented for bleaching with 100% chlorine dioxide and the effect of elemental chlorine impurities. The typical fingerprint of PCDD/Fs in pulp bleached with elemental chlorine was unique compared to all other sources such as incineration and metallurgic processes. 2,3,7,8-TCDD and 2,3,7,8-TCDF were the dominating congeners formed during the period pulp was bleached with elemental chlorine. Elimination of unchlorinated precursors lowered, but did not eliminate, the formation of 2,3,7,8-TCDD and 2,3,7,8-TCDF. The formation of 2,3,7,8-TCDD and 2,3,7,8-TCDF increases exponentially with the amount of elemental chlorine used. Replacing elemental chlorine with chlorine dioxide (with levels of elemental chlorine contamination of <0.3% in the chlorine dioxide) in pulp bleaching eliminates the formation of 2,3,7,8-TCDD and 2,3,7,8-TCDF. PCDD/Fs can also be found in background levels in ecosystems, food, soil and air as well as in unbleached pulp, bleached pulp, and paper and fiber products. Thus, the only way to determine if PCDD/Fs are present from bleaching is to make a full congener analysis and compare to known sources and processes as well as to laboratory blanks and unbleached reference samples., (Copyright © 2019 The Author. Published by Elsevier Ltd.. All rights reserved.)

The set-off migration from printing inks can cause alterations in the safety and acceptability of food. Therefore, its control in the food industry is of special importance. The aim of this study was the determination of the migration of compounds coming from different types of cardboard-cups used in coffee vending machines. The volatile compounds present in cardboard-cups were studied and specific migration studies were carried out by solid phase microextraction with headspace coupled to gas chromatography (HS-SPME-GC-MS). The migration of compounds from the cardboard-cups manufacturing material, plastic coating (LDPE) and printing inks were identified and quantified. Those migrants listed in the Regulation No. 10/2011 presented values lower than the specific migration limit (SML), although a series of non-listed and non-authorized compounds were identified. From the results obtained the risk assessment of the vending cups from two different companies has been done., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

A laboratory scale (LS) and a field-based pilot plant (PP), designed to simulate aerobic stabilization basin (ASB) operation, were utilized to assess the potential impacts of changes in pulp and paper (P&P) mill operations on full-scale (FS) ASB performance. Two stages of investigation were conducted. The first was undertaken to determine the potential of pre-alum treatment of pulp mill wastewaters on ASB performance. The second investigation was conducted to assess ASB performance where wastewaters transitioned from being coagulated pulp and paper mill wastewaters to paper mill wastewaters only. Simulation ASB performance was assessed based on removals of BOD 5 , colour, UV@254 nm and nutrients [total phosphorus (TP) and nitrogen compounds (TN)]. Pre-alum treatment of pulp mill wastewaters with subsequent ASB treatment following mixing with paper mill wastewaters showed high percentage removals of BOD 5 . Despite low TP concentrations (≤0.05 mg/L) and low nutrient to BOD 5 ratios of wastewaters in the LS-ASB trial, the high % BOD 5 removal indicated recycling of nutrients from sludge [sourced from the FS-ASB]. Despite coagulation of pulp mill wastewater being performed using a very high alum dose (∼2000 mg/L) to remove colour and its precursors, colour formation remained high throughout the simulated ASB trials. Simulation of discontinuation of pulping indicated that colour would reduce rapidly to low levels in ASB wastewaters, but that TP and TN concentrations would persist for longer periods of time and decline slowly. Survey data of water qualities of the FS-ASB system obtained before, during and 2 years after discontinuation of pulping are presented., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

In this study, Moringa oleifera (M. oleifera) performance as an eco-friendly coagulant in the enhanced primary treatment of paper mill effluent was investigated. Its performance in terms of turbidity removal and COD abatement was examined. Local M. oleifera seed powder from ADRAR-city, South of Algeria, was used. Conventional jar tests were conducted for enhancing the primary treatment of paper mill effluent from paper factory. For this reason, comparative coagulation tests were performed using aluminum sulfate (alum). Indeed, in terms of turbidity abatement, 96.02% and 97.1% were obtained for Moringa and alum, respectively. However, in the case of COD abatement, the abatement rate of M. oleifera seeds was slightly higher than that of alum, 97.28% and 92.67%, respectively. Because M. oleifera is a natural resource that is locally available, an eco-friendly coagulant, non-toxic, and biodegradable and does not affect the pH of water; thus, its use allows to avoid numerous disadvantages of conventional coagulants like alum., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Perfluoroalkyl acids (PFAAs) are widely used as multi-purpose surfactants or water/oil repellents. In order to understand the contamination level and compositional profiles of PFAAs in aqueous environment in textile, leather, and paper making industrial areas, surface waters and tap waters were collected along the watershed of the Qiantang River where China's largest textile, leather, and paper making industrial bases are located. For comparison, surface water and tapwater samples were also collected in Hangzhou and its adjacent areas. 17 PFAAs were analyzed by solid phase extraction-high performance liquid chromatography-tandem mass spectrometry. The results show that the total concentrations of PFAAs (ΣPFAAs) in the Qiantang River waters ranged from 106.1 to 322.9 ng/L, averaging 164.2 ng/L. The contamination levels have been found to be extremely high, comparable to the levels of the most serious PFAA contamination in surface waters of China. The PFAA composition profiles were characterized by the dominant PFOA (average 58.1% of the total PFAAs), and PFHxA (average 18.8%). The ΣPFAAs in tap water ranged from 9.5 to 174.8 ng/L, showing PFAA compositional pattern similar to the surface waters. Good correlations between PFAA composition profiles in tap waters and the surface waters were observed., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Chlorine bleaching technology (C process, CEH process, H process and theirs combination), which was identified as a primary formation source of PCDD/Fs, is still widely used by the vast majority of Chinese non-wood pulp and paper mills (non-wood PMs). The purpose of this study was to provide information and data support for further eliminating dioxin for non-wood PMs in China, and especially to evaluate the PCDD/Fs release reduction for those mills converting their pulp bleaching processes from CEH to ECF. The PCDD/Fs concentrations of the bleached pulp and bleaching wastewater with ECF bleaching were in the ranges of 0.13-0.8 ng TEQ kg -1 , and 0.15-1.9 pg TEQ L -1 , respectively, which were far lower than those with CEH process, indicating that the ECF process is an effective alternative bleaching technology to replace CEH in Chinese non-wood PMs to reduce dioxin release. The release factor via flue gas of the alkali recovery boiler in Chinese non-wood PMs was first reported to be 0.092 μg TEQ Ad t -1 in this study. On the assumption that pulp bleaching processes of all Chinese non-wood PMs were converted from CEH to ECF, the annual release of PCDD/Fs via the bleaching wastewater and bleached pulp would be reduced by 79.1%, with a total of 1.60 g TEQ., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Thermal paper contains potentially toxic compounds such as bisphenol A (BPA), which is used as a color developer. BPA has been reported in thermal paper in concentrations up to 42,600 μg g -1 . The exposure to BPA via dermal transfer has been recently discussed as a significant contribution to the overall human exposure and the estimated daily intake (EDI) has been reported up to 218 μg d -1 . BPA has been also detected in recycled paper with concentrations up to 46 μg g -1 . Due to the fact that BPA is a known endocrine disruptor and migrates from materials, regulatory restrictions have been established to prevent risks for the human health. As a consequence, structural analogues, such as bisphenol S (BPS) have been introduced into the market. Little is known about the presence and toxicity of these emerging replacements, and concern has risen about them. The present review gives an overview of the occurrence and levels of BPA and replacements in thermal paper. BPA is still the most common color developer found in thermal paper, followed by BPS. The analytical methods used for quantification of BPA and BPA replacements in paper products are also reviewed. BPA is transferred from thermal paper products to the finger pads upon handling it. Paper-skin transfer followed by penetration of BPA depends on conditions (e.g. greasiness of fingers and use of hand cream). It is, however, still debated whether thermal paper as a source for human exposure contributes significantly to the overall internal BPA exposure., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Over the last years, more stringent safety requirements for an increasing number of chemicals across many regulatory fields (e.g. industrial chemicals, pharmaceuticals, food, cosmetics, …) have triggered the need for an efficient screening strategy to prioritize the substances of highest concern. In this context, alternative methods such as in silico (i.e. computational) techniques gain more and more importance. In the current study, a new prioritization strategy for identifying potentially mutagenic substances was developed based on the combination of multiple (quantitative) structure-activity relationship ((Q)SAR) tools. Non-evaluated substances used in printed paper and board food contact materials (FCM) were selected for a case study. By applying our strategy, 106 out of the 1723 substances were assigned 'high priority' as they were predicted mutagenic by 4 different (Q)SAR models. Information provided within the models allowed to identify 53 substances for which Ames mutagenicity prediction already has in vitro Ames test results. For further prioritization, additional support could be obtained by applying local i.e. specific models, as demonstrated here for aromatic azo compounds, typically found in printed paper and board FCM. The strategy developed here can easily be applied to other groups of chemicals facing the same need for priority ranking., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

One of the major problems in effluent treatment plants of the cellulose and paper industry is the large amount of residual sludge generated. Therefore, this industry is trying to develop new methods to treat such residues and to use them as new products, such as adsorbents. In this regard, the objective of this work was to develop an adsorbent using the raw activated sludge generated by the cellulose and paper industry. The activated cellulose sludge, after being dried, was chemically activated with 42.5% (v/v) phosphoric acid at 85 °C for 1 h and was charred at 500 °C, 600 °C and 700 °C for 2 h. The efficiency of the obtained adsorbent materials was evaluated using kinetic tests with methylene blue solutions. Using the adsorption kinetics, it was verified that the three adsorbents showed the capacity to adsorb dye, and the adsorbent obtained at a temperature of 600 °C showed the highest adsorption capacity of 107.1 mg g -1 . The kinetic model that best fit the experimental data was pseudo-second order. The Langmuir-Freudlich isotherm adequately described the experimental data. As a result, the cellulose sludge generated by the cellulose and paper industries could be used as an adsorbent., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Enzyme-aided Cl 2 bleaching is widely considered as promising replacements for conventional Cl 2 bleaching in wood pulp and paper mills. However, the effects of using enzyme-aided bleaching on the formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the non-wood pulp and paper mills are unclear. A field study was performed to investigate PCDD/F formation when enzyme-aided Cl 2 bleaching was used to replace conventional Cl 2 bleaching in non-wood pulp and paper mills. Unexpectedly, the PCDD/F toxic equivalents (TEQs) in solid samples were higher when using enzyme-aided bleaching (0.49-5.4 pg TEQ/g) than that using conventional Cl 2 bleaching (0.15-2.44 pg TEQ/g). Large amounts of octachlorodibenzo-p-dioxin were formed during the enzyme-aided bleaching process. This could have been because enzyme strongly promoted the release of organic molecules bound to lignin and thus accelerated the formation of octachlorodibenzo-p-dioxin through organic molecular precursors. Although enzyme-aided Cl 2 bleaching was previously considered to be efficient for reducing PCDD/F releases and to be the best available technologies and best environmental practices for wood pulp and paper mills, the results obtained in this study suggested the necessity and urgency to evaluate the suitability of enzyme-aided Cl 2 bleaching for non-wood pulp and paper mills that intensively practiced in developing countries., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

A lignin peroxidases-producing Serratia liquefaciens was used for bioremediation of pulp and paper (P&P) mill effluent. The treatment led to reduction of chemical oxygen demand (COD), colour, lignin and phenolic content by 84%, 72%, 61% and 95%, respectively. The effluent detoxification was studied by genotoxicity assays using Allium cepa L. (onion) root tip cells. Genotoxicity studies included measuring mitotic index (MI), chromosomal aberrations (CA) and nuclear abnormalities (NA) in root tip cells following treatment with 25, 50, 75 and 100% (v/v) of effluent. The root tip cells grown in untreated effluent showed a significant decrease in MI from 69% (control) to 32%, 27%, 22% and 11% at 25%, 50%, 75% and 100% effluent concentration, respectively. This indicated that the untreated effluent was highly cytotoxic in nature. Further, root tip cells, when treated with different concentrations of effluent showed various CA and NA including c-mitosis, stickiness, chromosome loss, chromosome break, anaphase bridge, multipolar anaphase, vagrant chromosomes, micronucleated and binucleated cells. The MI observed in root tip cells grown in bacterial treated effluents at similar concentrations (25, 50, 75 and 100% v/v) showed an increase of 33%, 36%, 42% and 66%. CA showed a substantial decrease and in some instances, complete absence of CA was also observed. The findings suggest that S. liquefaciens culture could be a potential bacterial culture for bioremediation of P&P mill effluent, as it is effective in substantial lowering of pollutants load as well as reduces the cytotoxic and genotoxic effects of effluent., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Tricaine methanesulfonate (MS-222) has been widely used in intensive aquaculture systems to control stress during handling and confinement operations. This compound is dissolved in the water tanks and, once it is present in the Recirculating Aquaculture Systems (RASs), MS-222 can reach the environment by the discharge of contaminated effluents. The present work proposes the implementation of the adsorption process in the RASs, using pyrolysed biological paper mill sludge as adsorbent, to remove MS-222 from aquaculture wastewater. Adsorption experiments were performed under extreme operating conditions, simulating those corresponding to different farmed fish species: temperature (from 8 to 30 °C), salinity (from 0.8 to 35‰) and different contents of organic and inorganic matter in the aquaculture wastewater. Furthermore, the MS-222 adsorption from a real aquaculture effluent was compared with that from ultrapure water. Under the studied conditions, the performance of the produced adsorbent remained mostly the same, removing satisfactorily MS-222 from water. Therefore, it may be concluded that the produced adsorbent can be employed in intensive aquaculture wastewater treatment with the same performance independently of the farmed fish species., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

This study firstly investigated the species, concentration variation, and emission factors of mercury emitted from the burning of incenses and joss papers in an Asian temple. Both indoor and outdoor speciated mercury (GEM, GOM, and PHg) were sampled by manual samplers, while ambient GEM at an indoor site was in-situ monitored by a continuous GEM monitor. Field measurement results showed that the total atmospheric mercury (TAM) concentrations in indoor and outdoor environments were in the range of 8.03-35.72 and 6.03-31.35 ng/m 3 , respectively. The indoor and outdoor ratios (I/O) of TAM in the daytime and at nighttime were in the range of 0.64-0.90 and 1.50-2.04, respectively. The concentrations of GEM, GOM, and PHg during the holiday periods were approximately 1-4 times higher than those during the non-holiday periods. GEM was the dominant mercury species in the indoor and outdoor environments and accounted for 63-81% of TAM, while the oxidized mercury accounted for 19-37% of TAM. Burning incenses and joss papers in a combustion chamber showed that the concentration of GEM from joss paper burning ranged from 4.07 to 11.62 μg/m 3 , or about 13.97 times higher than that of incense burning, while the concentration of PHg from incense burning ranged from 95.91 to 135.07 ng/m 3 , or about 3.29 times higher than that of joss paper burning. The emission factors of incense burning were 10.39 ng/g of GEM and 1.40 ng/g of PHg, while those of joss paper burning were 12.65 ng/g of GEM and 1.27 ng/g of PHg, respectively. This study revealed that speciated mercury emitted from worship activities had significant influence on the indoor and outdoor mercury concentrations in an Asian temple. Higher intensity of worship activities during holidays resulted in a higher concentration of speciated mercury in indoor and outdoor air, which might cause health threats to worshipers, staffs, and surrounding inhabitants through long-term exposure., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The efficiency of combining iron sulfate and organic amendments (paper mill sludge, olive mill waste compost and olive tree pruning biochar) for the remediation of an As- and Cu-contaminated soil was evaluated. Changes in As and Cu fractionation and solubility due to the application of the amendments was explored by leachate analysis, single and sequential extractions. Also, the effects on Arrhenatherum elatius growth, germination of Lactuca sativa and toxicity to the bacteria Vibrio fischeri were assessed. The combination of iron sulfate and the organic amendments efficiently reduced As solubility and availability through the formation of amorphous iron oxides, while organic matter did not seem to mobilize As. At the same time, copper fractionation was strongly affected by soil pH and organic matter addition. The soil pH significantly influenced both As and Cu mobility. Within all the amendments tested, FeSO 4 in combination with compost showed to be the most suitable treatment for the overall remediation process, as it reduced As and Cu availability andenhanced soil nutrient concentrations and plant growth. In sipte of contradictory trends between chemical analyses and ecotoxicity tests, we can still conclude that the application of organic amendments in combination with reactive iron salts is a suitable approach for the remediation of soils contaminated by Cu and As., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The study was conducted with an aim to remediate effluent from a pulp and paper mill, after treating it for 28 days with an aquatic fern, Salvinia cucullata. The effluent had high BOD, COD, TS, TSS, TDS, P, hardness and chloride, and several heavy metals (Cd, Cu, Cr, Ni, Pb, Mg, Mn, Fe and Zn) above national limits. However, the plant survived a wide range of effluent concentrations (25%, 50%, 75% and 100%, v/v), and flourished well, particularly at 25% (v/v), resisted membrane injury and generation of H2O2 and O2, showed better growth and induced all the major antioxidant enzymes. The plants also induced lipid peroxidation. Most of the elemental profiles were higher than the toxic levels stipulated for plants, indicating tolerance to metal. In fact, barring Fe, for Cr, Cu, Pb, Zn, Mg and P, at all the effluent doses, and for Cd, Ni and Mn, up to 75% (v/v) effluent, greater concentrations were observed in leaf than in root. This plant was more suited for nutrient removal, as it effectively reduced BOD, Zn, Fe, Ni, Mg, P and increased dissolve oxygen. Further, pH, hardness, chloride, TS and Mn was reduced optimally by 25-50% (v/v) treatments. SEM revealed prominent structural damages from 50 to 100% treatments. Presence of Pb as well as Fe in the EDX peaks were observed in the cortex rather than in the root vascular zone. This plant could be suggested to be an effective phytoremediator of multi-contaminant effluent with maximum benefit at low doses (25-50%, v/v)., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The emergence of Zika virus (ZIKV) infections in Latin America and Southeast Asia has created an urgent need for new, simple, yet sensitive, diagnostic tests. We highlight recent work using paper-based sensors coupled with CRISPR/Cas9 to detect ZIKV RNA as a new approach to achieve rapid development and deployment of field-ready diagnostics for emerging infectious diseases., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Chemosensors have attracted increasing attention for their usefulness on-site detection and monitoring. In this study, we elucidated a novel, facile, and highly selective Chemo-Paper-Sensor (CPS) for detection and monitoring of strontium (Sr(2+)) ions, which means a potent colorimetric sensor based on a Chrysoidine G (CG)-coated paper strip. The CPS for highly selective colorimetric detection of strontium ion was handily analyzed to determine the red-green-blue (RGB) value using portable devices such as desktop digital scanner and mobile phone camera, quantitatively. Interestingly, an orange to dark orange color transition was observed when the aqueous and solid paper colorimetric sensor was introduced to Sr(2+) ion, respectively. It was demonstrated that the value of the signal has a linear relationship with concentrations of the strontium in the 500 ppm to 100 ppb range with a detection limit of 200 ppb. We believe that a newly developed Chemo-Paper-Sensor will be useful in a wide range of sensing applications., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Due to the regulation on bisphenol A (BPA) in several industrialized countries, the demand for other bisphenol analogues (BPs) as substitutes for BPA is growing. Eight BPs were determined in sludge from 40 representative wastewater treatment plants (WWTPs) in Korea. Total concentrations of BPs (ΣBP) in sludge ranged from

Fluorescent whitening agents (FWAs) are highly soluble and poorly biodegradable ingredients used in laundry detergents and in industries (paper, textile, plastic manufacturing). They are likely to pass through biological wastewater treatment systems. The presence of FWAs in a mountain river was detected by monitoring the decay of synchronous fluorescence intensity at λ(ex)=360 nm after exposing samples to ultraviolet (UV) light (365 nm), for mimicking sunlight, for 15 min. The method was first validated on four commercial FWAs (DAS-1, FB28, DMA-X and CBS-X) in different water matrices (deionized water and pristine river water in the presence of humic acid and dyes). A 40% decay was observed after 15 min for the least photosensitive FWA (CBS-X). A field application was then performed on samples collected along a mountain river in which impacts of FWAs from domestic sources (laundry greywater) and industrial sources (paper and textile mills) were suspected. Variations of fluorescence decay at λ(ex)=360 nm could be explained by these potential sources of pollution. It is suggested that the fluorescence decay at λ(ex)=280 nm also be considered as an indicator, as some FWAs can exhibit fluorescence at that excitation wavelength., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

The use of waste wood as an energy carrier has increased during the last decade. However, the higher levels of alkali metals and chlorine in waste wood compared to virgin biomass can promote the formation of deposits and organic pollutants. Here, the effect of fuel composition and the inhibitory effects of ammonium sulfate, (NH4)2SO4, on the concentrations of persistent organic pollutants (POPs) in the flue gas of a lab-scale combustor was investigated. Ammonium sulfate is often used as a corrosion-preventing additive and may also inhibit formation of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). In addition to PCDDs and PCDFs, polychlorinated naphthalenes (PCN) and biphenyls (PCB) were also analyzed. It was found that the flue gas composition changed dramatically when (NH4)2SO4 was added: CO, SO2, and NH3 levels increased, while those of HCl decreased to almost zero. However, the additive's effects on POP formation were less pronounced. When (NH4)2SO4 was added to give an S:Cl ratio of 3, only the PCDF concentration was reduced, indicating that this ratio was not sufficient to achieve a general reduction in POP emissions. Conversely, at an S:Cl ratio of 6, significant reductions in the WHO-TEQ value and the PCDD and PCDF contents of the flue gas were observed. The effect on the PCDF concentration was especially pronounced. PCN formation seemed to be promoted by the elevated CO concentrations caused by adding (NH4)2SO4., (Copyright © 2013. Published by Elsevier Ltd.)

This paper investigates the effect of using recycled fiber (RCF) in newsprint production on the effluent quality and its treatability using membrane operations for internal and external recycling and reuse. Increased chemical usage in RCF for deinking had significant impact on the silica and sodium content of the effluent which in turn limits the membrane's operation. Increasing the RCF content from 0% to 50% is estimated to increase the silica content from 4 to 119mgL(-1) and sodium content from 135 to 500mgL(-1). A process model was developed to calculate the impact of these excess chemicals on the greenhouse gas (GHG) emission and brine disposal for an integrated membrane plant design producing 4MLday(-1) of recycled water. As the ratio of RCF increased from 0% to 50% in the mill process, the operating pressure increased for nanofiltration (NF) and reverse osmosis (RO). Additionally, organics presence in the feed increased the NF operating pressure above the simulated value and reduced the silica removal efficiency by 15%. Incorporation of lime coagulation pretreatment was found to be essential to operate RO at high recoveries with relatively GHG emissions. Without pretreatment, as RCF content increased from 0% to 50%, RO recovery decreased from 80% to 22% and the expended GHG increased from 0.9 to 3.5kgCO2m(-3). Although the excess sodium concentration limits the brine disposal for irrigation purposes, a partial blending of the treated wastewater with other process streams resulted in the reduction of sodium absorption ratio by 20%., (Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.)

Paper receipt has been documented as one major source of bisphenol A (BPA) for human exposure but little has been done by researchers to elaborate the potential health risk caused by handling paper receipt up to date. In the present study, BPA was analyzed in 42 supermarket receipts collected from Shenzhen, China. BPA was detected in all samples at concentrations ranging from 2.58 to 14.7mgg(-1). In most cases, the total amount of BPA on the receipt was at least one thousand times the amount found in the epoxy lining of a food can, another controversial use of the chemical. The estimated daily intakes (EDI) of BPA via handling of supermarket receipt ranged from 2 to 347μgday(-1) (mean, 40.4μgday(-1)) for a supermarket cashier and from 0.24 to 3.98μgday(-1) (mean, 0.69μgday(-1)) for general population. Based on the cumulative probability distribution of the calculated daily exposure to BPA via handling supermarket receipt, the EDI at the 0.1th and 1th percentile for supermarket cashier and general population, were already larger than 100ng (kgbw)(-1)day(-1), while at the 0.2th and 71th percentile, the EDI for both populations reached 1000ng (kgbw)(-1)day(-1). Considering the adverse endocrine disruptive effects of BPA and the dosage exposure level (from tens to hundreds ng (kgbw)(-1)day(-1)), human exposure to BPA in Shenzhen deserves more attention. Sensitivity analysis result showed that the handling time and frequency of supermarket receipts are the most important variables that contributed to most of the total variance of exposure., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Considerable amount of bottom ash (BA) is produced by tea and paper factories in Northeast India. This significantly deteriorates soil and surface water quality through rapid acidification, releasing sulfur compounds and heavy metals. The present investigation endeavoured to convert this waste to organic manure through vermicomposting by Eisenia fetida. Substantial increment in bioavailability of N, P, K, Fe, Mn and Zn along with remarkable decline in toxic metal like Cr due to vermicomposting was noteworthy. Furthermore, vermicomposted mixtures of Tea Factory BA (TFBA) or Paper Mill BA (PMBA) with organic matter (OM) attributed profuse pod yield of French Bean (Phaseolus vulgaris L.). Hence, bioconversion of TFBA and PMBA is highly feasible through vermicomposting and the converted materials can be utilized as potential organic fertilizer., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

The use of waste wood as an energy carrier has increased during the last decade. However, elevated levels of alkali metals and chlorine in waste wood compared to virgin biomass can cause increased deposit formation and higher concentrations of organic pollutants. In this study, we investigated the effect of the ChlorOut technique on concentrations of organic pollutants. Ammonium sulfate was injected into the combustion system to inhibit formation of KCl (which causes deposits) and persistent organic pollutants, namely polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs). The results showed that concentrations of the toxic congeners of PCDD, PCDF and PCB decreased in the presence of ammonium sulfate., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Current study presents the effect of irrigation with different compositions (0%, 20%, 40%, 60%, 80% and 100%) of PBM effluent on growth and antioxidant potential of Brassica rapa var. rapa L. plants. Seeds were exposed to different PBM effluent compositions, which resulted in significant decrease in their germination potential with elevated delay index. Significant changes in growth parameters (plant height, number of leaves and leaf area) were recorded for turnip plants at regular intervals (25, 50 and 75 d) as function of PBM effluent proportion. Response of biochemical and antioxidant constituents in different parts of turnip, against stress induced by PBM effluent, was assessed by estimating the contents of chlorophyll (a+b), carotenoids, protein, phenolics, flavonoids, ascorbic acid and malondialdehyde. Antioxidant activity was evaluated by measuring DPPH radical scavenging potential. The results of this study suggest that the impact of PBM effluent irrigation is dependent on concentration of effluent in irrigation mixture and is very clear on plant growth and antioxidant attributes. Maximum benefits were secured at 40% PBM effluent to irrigate turnip plants till maturity while higher concentrations were found useful for shorter period (25-50 d)., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In this study, the efficiency of six ion exchange resins to reduce the dissolved organic matter (DOM) from a biologically treated newsprint mill effluent was evaluated and the dominant removal mechanism of residual organics was established using advanced organic characterisations techniques. Among the resins screened, TAN1 possessed favourable Freundlich parameters, high resin capacity and solute affinity, closely followed by Marathon MSA and Marathon WBA. The removal efficiency of colour and lignin residuals was generally good for the anion exchange resins, greater than 50% and 75% respectively. In terms of the DOM fractions removal measured through liquid chromatography-organic carbon and nitrogen detector (LC-OCND), the resins mainly targeted the removal of humic and fulvic acids of molecular weight ranging between 500 and 1000 g mol(-1), the portion expected to contribute the most to the aromaticity of the effluent. For the anion exchange resins, physical adsorption operated along with ion exchange mechanism assisting to remove neutral and transphilic acid fractions of DOM. The column studies confirmed TAN1 being the best of those screened, exhibited the longest mass transfer zone and maximum treatable volume of effluent. The treatable effluent volume with 50% reduction in dissolved organic carbon (DOC) was 4.8 L for TAN1 followed by Marathon MSA - 3.6L, Marathon 11 - 2.0 L, 21K-XLT - 1.5 L and Marathon WBA - 1.2 L. The cation exchange resin G26 was not effective in DOM removal as the maximum DOC removal obtained was only 27%. The resin capacity could not be completely restored for any of the resins; however, a maximum restoration up to 74% and 93% was achieved for TAN1 and Marathon WBA resins. While this feasibility study indicates the potential option of using ion exchange resins for the reclamation of paper mill effluent, the need for improving the regeneration protocols to restore the resin efficiency is also identified. Similarly, care should be taken while employing LC-OCND for characterising resin-treated effluents, as the resin degradation is expected to contribute some organic carbon moieties misleading the actual performance of resin., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The removal of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) from solid matrices has received considerable attention because of the environmental persistence, bioaccumulation, and potential toxicity of these compounds. This study presents a simple method using concentrated HNO(3) as a suppression agent, and methanol-modified supercritical carbon dioxide (Sc-CO(2)) extraction for removing PFOS and PFOA from solid matrices. The optimal conditions were 16 M HNO(3) and 20% (v/v) methanol containing Sc-CO(2), under a pressure of 20.3 MPa and a temperature of 50 °C. Extraction time was set at 70 min (40 min for static and 30 min for dynamic extraction). PFOA and PFOS were identified and quantitated by liquid chromatography/mass spectrometry. The extraction efficiencies (with double extractions) were close to 100% for PFOA and 80% for PFOS for both paper and fabric matrices. The extraction efficiencies for sand were approximately 77% for PFOA and 59% for PFOS. The results show that this method is accurate, and effective, and that it provides a promising and convenient approach to remediate the environment of hazardous PFOA and PFOS contamination., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

One of the chemical breakdown products of nonylphenol ethoxylates, 4-nonylphenol (4-NP), accumulates in organisms and is of concern as an environmental pollutant due to its endocrine disrupting effects. We measured 4-NP levels in the seawater, sediment, and twelve organisms within the California estuary, Morro Bay, and examined biomagnification of 4-NP using stable isotope abundances (δ(15)N and δ(13)C) to quantify trophic position. 4-NP concentrations in organisms from Morro Bay included 25000±8600 ng g(-1) lw in liver of California sea lion, 14000±5600 ng g(-1) lw in liver of harbor porpoise, 138000±55000 ng g(-1) lw in liver of sea otters, 15700±3600 ng g(-1) lw in liver of seabirds, 36100±6100 ng g(-1) lw in arrow goby fish, 62800±28400 ng g(-1) lw in oysters, and 12700±1300 ng g(-1) lw in mussels. 4-NP levels generally showed a pattern of trophic dilution among organisms in Morro Bay, with exceptions of biomagnification observed between three trophic links: mussel to sea otter (BMF 10.9), oyster to sea otter (BMF 2.2), and arrow goby to staghorn sculpin (BMF 2.7). Our examination of other west coast estuaries of USA and Canada revealed that mean 4-NP concentrations in gobies and mussels from Morro Bay were significantly higher than those from a more urbanized estuary, San Francisco Bay (goby: 11100±3800 ng g(-1) lw) and from a remote estuary, Bamfield Inlet, Canada (goby: 9000±900 ng g(-1) lw, mussel: 6100±700 ng g(-1) lw). Relative to other estuaries worldwide, 4-NP levels in seawater (0.42±0.16 μg L(-1)) and sediment (53±14 ng g(-1) dw) of Morro Bay are low, but gobies and oysters have higher 4-NP levels than comparable fauna., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Triphenylmethanes - Malachite Green (MG), Crystal Violet (CV) and Brilliant Green (BG) are dyes with known genotoxic and carcinogenic properties. Apart from being illegally used in aquaculture for treatment of fish diseases they are also applied in industry such as paper production to colour paper towels widely used in hospitals, factories and other locations for hand drying after washing. The present study provides evidence that the triphenylmethane dye (BG) present in green paper towels can migrate through the skin even when the exposure time is short (30-300 s). The transfer of the dye from the towel to food (fish) was also studied and a high amount of colour was found to migrate during overnight exposure. The risk to humans associated with these two dye transfer studies was assessed using a 'margin of exposure approach' on the basis of the toxicological data available for the closely related dye MG and its metabolite Leucomalachite Green. The data indicated that the risk associated with the use of triphenylmethane containing paper towels is of a similar proportion to the risk associated with consumption of fish contaminated with these dyes due to the illegal application in aquaculture., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

This study focused on steam gasification and reforming of waste biomass using a reforming catalyst. The purpose of the study was to evaluate the durability of a commercial Ni reforming catalyst and the effect of CaO on the reforming behavior, and to clarify detailed factors of catalytic performance, as well as the effect of operating parameters on the characteristics of produced gas composition. Moreover, catalyst regeneration was carried out and the behavior of catalytic activity based on gas composition was investigated. Using a fluidized bed gasifier and a fixed bed reformer, gasification and reforming of waste biomass were carried out. Commercial Ni-based catalyst and calcined limestone (CaO) were applied to the reforming reaction. Temperature of the gasifier and reformer was almost 1023K. Ratio of steam to carbon in the feedstock [molmol(-1)] and equivalence ratio (i.e., ratio of actual to theoretical amount of oxygen) [-] were set at about 2 and 0.3, respectively. The feed rate of the feedstock into the bench-scale gasifier was almost 15kgh(-1). The results of waste biomass gasification confirmed the improvement in H(2) composition by the CO(2) absorption reaction using the reforming catalyst and CaO. In addition, CaO proved to be especially effective in decreasing the tar concentration in the case of woody biomass gasification. Catalytic activity was maintained by means of catalyst regeneration processing by hydrogen reduction after air oxidation when woody biomass was used as feedstock., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Aroclor 1242 contains a high percentage of lightly chlorinated congeners, which makes it susceptible to congener profile alterations as a result of physical-chemical environmental weathering by water washing, evaporation, and volatilization. The analysis of the variability of congener profiles in paper sludge samples using PCA, mixing models, and correlation (R(2)) analysis, provided an integrated description of the behavior of Aroclor 1242 after its release in the environment. The results showed that the total PCB concentration decreased as the sample experienced weathering, with the congener profile of Aroclor 1242 shifting towards resembling heavier Aroclors as lighter congeners were lost. Mixing model analysis confirmed that a sample containing weathered Aroclor 1242 could easily be misidentified by laboratories as containing a mix of heavier Aroclors. The R(2) analysis showed that the profile of the congeners within a homologue group remained the same after weathering. This analysis showed that congeners that belong to the same level of chlorination behave similarly in such a manner that retains their overall profile when exposed to physical weathering., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

The potential health and environmental hazards of carbon nanotubes (CNTs) have been a concerned issue. However, in contrast to the wide recognition of the toxicity of CNTs, little attention has been paid to the decontamination/remediation of CNT pollution. In this study, we report that CNTs can be removed from aqueous environment. In the presence of Ca²(+), CNTs aggregate quickly to micron size and then enable easy and effective removal via normal filtration. After filtration, CNT suspension becomes colorless with the remnant CNT concentration less than 0.5 μg mL⁻¹, a safe dose based on the published data. The filtration approach also works well in the presence of typical surfactant and dissolved organic matter. The removal efficiency is Ca²(+) concentration-dependent and regulated by the initial pH value and ionic strength. Our study is helpful for future decontamination of CNTs from aqueous environment., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Recycling paper mill effluent by conventional water treatment is difficult due to the persistence of salt and recalcitrant organics. Elimination of dissolved organic matter (DOM) from paper mill effluent was studied using three treatment options, ion exchange resin (IER), granular activated carbon (GAC) and nanofiltration (NF). The removal efficiency was analysed based on hydrophobicity, molecular weight and fluorogenic origin of the DOM fractions. For IER, GAC and NF treatments, overall removal of dissolved organic carbon was 72%, 76% and 91%, respectively. Based on the hydrophobicity, all the three treatment methods majorly removed hydrophobic acid fractions (HPhoA). Further, IER acted on all fractions, 57% of HPhoA, 44% of transphilic acid and 18% of hydrophilics, substantiating that the removal is by both ion exchange and adsorption. Based on the molecular weight, IER and GAC treatments acted majorly on the high molecular weight fractions, whereas NF eliminated all molecular weight fractions. After GAC adsorption, some amount of humic hydrolysates and low molecular weight neutrals persisted in the effluent. After IER treatment, amount of low molecular weight compounds increased due to resin leaching. Qualitative analysis of fluorescence excitation emission matrices showed that the fulvic acid-like fluorophores were more recalcitrant among the various DOM fractions, considerable amount persisted after all the three treatment methods. Three treatment methods considerably differed in terms of removing different DOM fractions; however, a broad-spectrum process like NF would be needed to achieve the maximum elimination., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

In the present study the effect of laboratory exposure to wastewaters from Aligarh (AWW) and Saharanpur (SWW) on the activities of cytochrome P450 (CYP450) isozymes like ethoxyresorufin-o-deethylase (EROD), pentoxyresorufin-o-deethylase (PROD) and N-nitrosodimethylamine demethylase (NDMA-d) were investigated in the liver and kidney of rats. The industrial wastewater samples from Saharanpur city of northern India resulted 12, 3.5 and 1.5-fold rise in the EROD (CYP1A1), PROD (CYP2B1) and NDMA-d (CYP2E1) activity, respectively, in the liver of treated animals. Renal EROD and PROD activities were found to be enhanced by around 5 and 7-folds, respectively, as a result of SWW treatment. On the other hand, Aligarh samples showed significant inhibition in these test CYP450 enzymes both in hepatic as well as renal tissues. Strong induction of CYP1A1 (>10-fold) suggests that EROD can serve as a potent biomarker of SWW in the liver of treated animal. However, PROD and EROD can also act as fairly good biomarkers in case of renal tissue. Marked elevation of EROD activity in SWW treated animals strongly suggests the overwhelming levels of EROD inducers in the Saharanpur sample while a meagre amount of inducers accompanied with significant levels of inhibitors in the Aligarh sample., (Copyright (c) 2010 Elsevier Ltd. All rights reserved.)

A previously uncultured Propionibacterium was isolated from a highly diluted sample (10(-6)mL) of activated sludge of paper mill effluent. The isolate MOB600 was able to grow on anisole, phenetole, benzene, toluene, phenol, styrene and biphenyl, although it used only limited carbon sources in the minimal media. The partial DNA sequence of 16S ribosomal RNA gene was 93% identical to Luteococcus peritoni CCUG38120 as the closest neighborhood in the family Propionibacteriaceae. Strain MOB600 produced 2-methoxyphenol and 2-ethoxyphenol seemingly in an unproductive pathway from the degradation of anisole and phenetole, respectively. It had a substrate preference to favor 3-alkoxyphenols over 2-alkoxyphenols. Formation of 3-hydroxylated O-aryl alkyl ether was substantially proved by the nearly 1:1 biotransformation of substrate-analogous 1,2-methylenedioxybenzene to 3,4-methylenedioxyphenol (sesamol) showing end-product inhibition. The strain converted 2-/3-methoxyphenols to 3-methoxycatechol. The extradiol ring fission of 3-methoxycatechol appeared to take place in the production of a yellow-colored 2-hydroxymuconate derivative, thereby being able to release methanol spontaneously. High specificity polymerase chain reaction screening for bacterial dioxygenases revealed that the genomic DNA encoded at least three ring-hydroxylating dioxygenase large subunits. Being consistent with substrate availability for this strain, the obtained sequences were closely related to large subunits of an isopropylbenzene 2,3-dioxygenase, a benzene 1,2-dioxygenase, a biphenyl 2,3-dioxygenase, a benzoate 1,2-dioxygenase and a putative dioxygenase in Rhodococcus strains. Our results demonstrate that strain MOB600 may play a major role in the degradation of lignin-like O-aryl alkyl ethers and various aromatic hydrocarbon pollutants in activated sludge of paper mill effluent.

The removal of AOX from bleach plant effluent of pulp and paper industry was studied using upflow anaerobic filter. In this paper biodegradation of AOX at different concentrations and effect of electron donors like acetate and glucose thereon in an upflow anaerobic filter at 20 d HRT is described. Results showed significant improvement in AOX degradation when electron donors such as acetate and glucose were supplemented to the influent. AOX degradation was 88% at 28 mg AOX L(-1) and 28% at 42 mg AOX L(-1). The percent degradation efficiency was enhanced to 90.7, 90.2, and 93.0 at 28 mg AOX L(-1) when the influent was supplemented with glucose, acetate and both glucose and acetate, respectively. Similarly, the efficiency was 57, 56.6 and 79.6 at 42 mg AOX L(-1) when the influent was supplemented with glucose, acetate and both glucose and acetate, respectively. The GC-MS analysis data indicated that supplementation of the influent with electron donor increased the biodegradability of number of chlorinated organic compounds.

This study examined the potential biological hazard of pulp and paper waste solids. The solids examined were chosen on the basis of the range of wood-related organic extractives and were either primary solids screened from the effluent stream before secondary treatment, or biosolids from aerated stabilisation lagoons. Acute effects were tested at the level of plants, invertebrates and soil microbes using an oat germination and growth test, earthworm survival and reproduction test, an enchytraeid worm survival and reproduction test, and standard measures of microbial respiration. This was further benchmarked against a marine bacteria toxicity test using extract of the waste solids. Resin acids and resin acid neutrals made up the greatest proportion of organic extractives measured in biosolids whereas resin acids and fatty acids were the main constituents detected in primary solids. Examination of the tissue of earthworms from the tests revealed no net bioconcentration of the organic extractives. The waste solids were not acutely toxic to any of the soil organisms as tested without any dilution. Conversely, extracts of the waste solids demonstrated toxicity in the marine bacteria. In some cases, the solid waste material enhanced the growth of plants, earthworm reproduction and microbial respiration. The only adverse affect was that reproduction of enchytraeids was reduced by some of the waste solid treatments. However these effects did not appear to be associated with concentrations of resin acid neutrals and resin acids in these materials. Overall pulp and paper wastes were relatively benign in terms of toxicity to the soil organisms tested.