Search

Naturally occurring manganese (Mn) oxide minerals often form by microbial Mn(II) oxidation, resulting in nanocrystalline Mn(III/IV) oxide phases with high reactivity that can influence the uptake and release of many metals (e.g., Ni, Cu, Co, and Zn). During formation, the structure and composition of biogenic Mn oxides can be altered in the presence of other metals, which in turn affects the minerals' ability to bind these metals. These processes are further influenced by the chemistry of the aqueous environment and the type and physiology of microorganisms involved. Conditions extending to environments that typify mining and industrial wastewaters (e.g., increased salt content, low nutrient, and high metal concentrations) have not been well investigated thus limiting the understanding of metal interactions with biogenic Mn oxides. By integrating geochemistry, microscopic, and spectroscopic techniques, we examined the capacity of Mn oxides produced by the Mn(II)-oxidizing Ascomycete fungus Periconia sp. SMF1 isolated from the Minnesota Soudan Mine to remove the metal co-contaminant Co(II) from synthetic waters that are representative of mining wastewaters currently undergoing remediation efforts. We compared two different applied remediation strategies under the same conditions: coprecipitation of Co with mycogenic Mn oxides versus adsorption of Co with pre-formed fungal Mn oxides. Co(II) was effectively removed from solution by fungal Mn oxides through two different mechanisms: incorporation into, and adsorption onto, Mn oxides. These mechanisms were similar for both remediation strategies, indicating the general effectiveness of Co(II) removal by these oxides. The mycogenic Mn oxides were primarily a nanoparticulate, poorly-crystalline birnessite-like phases with slight differences depending on the chemical conditions during formation. The relatively fast and complete removal of aqueous Co(II) during biomineralization as well as the subsequent structural incorporation of Co into the Mn oxide structure illustrated a sustainable cycle capable of continuously remediating Co(II) from metal-polluted environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Heavy-metal-bearing wastewater is among the most formidable challenges the mining industry currently faces in maintaining its social license to operate. Amongst the technologies available for metal ion adsorption, bioinspired engineering nanomaterials have emerged as one which exhibits great promise. However, current processes used for the preparation of adsorbents (including nanoscale activated carbon and biochar) represent a source of adverse impacts on the environment. In contrast, the application of biogenic-nanoparticles, i.e., those derived from processes catalysed by microbiota, has received significant attention in the last few years. Coupled with this, the use of naturally occurring reagents is of major importance for the sustainability of this emerging industry. This paper analyses the life cycle assessment (LCA) of the synthesis of adsorbents derived from agricultural wastes. Moreover, rather than simply recovering the ecotoxic metals from wastewater, the potential to valorise dissolved metals into high-value metallic nanoparticle products is discussed. LCA analysis revealed that the adsorbent had some adverse impact on the environment. The agricultural wastes contributed 27.86% to global warming, 54.64% to ozone formation, 33.06% to fine particles, and 98.24% to marine eutrophication. Mining wastewater is an important, and largely currently unexploited, source of metal value. However, the often-low concentration of such metals dictates that their conversion into high-value products (such as engineered nanoparticles) is an important new research frontier. Within this the use of biosynthesis methods has emerged as having great potential due to a range of beneficial attributes, including low cost, high efficacy and/or environmental compatibility., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Low nitrogen (N) removal efficiency limits the potential of microalgae technology for the treatment of high nitrogen and low carbon rare earth tailings (REEs) wastewater. In this study, waste corncob was utilized as a biocarrier immobilizing Chlamydopodium sp. microalgae to realize high-efficient treatment of the REEs wastewater. In only 2.5 d, corncob-immobilized microalgae allowed the residual concentrations of N lower than the emission standards, and ammonia nitrogen (NH 4 + -N) removal rate is 83.3 mg L -1 ·d -1 , total inorganic nitrogen (TIN) removal rate is 86.7 mg L -1 ·d -1 , which was 18.5 times that of the previously-reported microalgae (4.68 mg L -1 ·d -1 ). Compared with other microalgae immobilization carriers, corncob possesses the ability to release available carbon sources for microalgae. Composition analysis and sugar verification experiments showed that the main content of TOC released by corncob was monosaccharide, and in a certain range, the removal rate of N was positively correlated with the TOC concentration. The utilization of biomass wastes with dual functions as biological carriers has great potential to improve the performance of microalgae, and is conducive to the development of engineering applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Arsenic contamination is an increasing global environmental problem, especially in mining industry wastewater where both arsenite (As(III)) and arsenate (As(V)) have been routinely detected. In this paper, a novel porous metal-organic framework material (ZIF-8) was composited with iron nanoparticles (FeNPs) to form a functional material (ZIF-8@FeNPs) for the simultaneous removal of As(III)/(V) from wastewater. The material effectively removed both As(III) and As(V) with removal efficiencies of 99.9 and 71.2%, respectively. Advanced characterization techniques including X-ray photoelectron spectroscopy (XPS) and Fourier infrared (FTIR) indicated that removal of As(III) and As(V) involved complex formation. Adsorption kinetics followed a pseudo-second order kinetics indicating adsorption involved chemisorption. After four cycles of reuse the he removal rate of As species was still relatively high at > 60% When ZIF-8@FeNPs were used to remove As from real wastewater from acid mines the removal efficiency was 94.27%. Finally, a As(III) and As(V) removal mechanism was proposed., (Copyright © 2022 Elsevier Ltd. All rights reserved.)