Search

The magnetic MgFe 2 O 4 nanoparticles (NPs) were fabricated via a facile co-precipitation technique and was comprehensively characterized by XRD, FTIR, SEM, EDX and VSM. The prepared NPs were used as catalyst in presence of ultrasound (US) irradiation to activate persulfate (PS) for generation of sulfate radicals (SO 4 ·- ) for boosted degradation of toxic Brilliant Green (BG) dye. Preliminary experiments revealed that highest BG dye degradation efficiency of 91.63% was achieved at MgFe 2 O 4 catalyst dose of 1.0 g/L, PS dose of 300 mg/L, and initial dye concentration of 70 ppm within 15 min of US irradiation. However, only US, US in presence of PS oxidation and US in presence of MgFe 2 O 4 catalyst have shown 20.2%, 83.6% and 45.0% of BG dye removal, respectively. Furthermore, response surface methodology (RSM) based central composite design (CCD) was executed to investigate the effect of interaction between independent variables such as MgFe 2 O 4 catalyst dose (0.5-1.5 g/L), PS dose (150-350 mg/L), initial BG dye concentration (50-150 ppm) and US irradiation time (4-12 min). The RSM based quadratic model was used to predict the experimental data, and the prediction accuracy was confirmed by analysis of variance (R 2  = 0.98). The established RSM model has predicted the optimum experimental conditions as MgFe 2 O 4 catalyst dose of 0.75 g/L, PS dose of 300 mg/L, initial dye concentration of 75 ppm and sonication time of 10 min. Subsequently, the treatment cost analysis was performed for all thirty experimental runs of CCD, and the RSM predicted response was found to be evidently optimum as this has delivered best economic condition (140 $/kg of BG removed) with respect to relative dye removal (%). COD removal and residual sulfate analysis have demonstrated satisfactory reduction of COD (90.31%) as well as sulfate ions (42.87 ppm) in the dye solution after treatment. Results of degradation pathway analysis portrayed the transformation of BG molecule (M/Z ratio 385) into simpler fractions with M/Z ratio of 193, 161, 73, and 61. Moreover, the toxicity analysis revealed that sono-catalytically activated PS system has efficiently reduced the toxicity level of BG dye from 93.9% to 5.13%., (Copyright © 2021 The Author(s). Published by Elsevier B.V. All rights reserved.)

Silver nanoparticles (nAg) are often produced with different coatings that could influence bioavailability and toxicity in aquatic organisms. The purpose of this study was to examine the influence of 4 surface coatings of nAg of the same core size towards bioavailability and toxicity in juvenile rainbow trout (Oncorhynchus mykiss). Juveniles were exposed to 50 μg/L of 50 nm diameter nAg for 96 h at 15 °C with the following coatings: branched polyethylenimine (bPEI), citrate, polyvinylpyrrolidone (PVP) and silicate (Si). The data revealed that the coatings influenced hepatic Ag loadings in the following trend PVP > citrate > bPEI and Si with estimated bioavailability factors of 28, 18, 6 and 2 L/kg respectively. Hepatic Ag levels were significantly associated with DNA damage and inflammation as determined by arachidonate cyclooxygenase activity. The bPEI and citrate-coated nAg consistently produced the observed effects above in addition to increased mitochondrial electron transport activity and glutathione S-transferase activity. The absence of metallothionein and lipid peroxidation suggests that mechanisms other than the liberation of Ag + were at play. In conclusion, surface coatings were shown to significantly influence bioavailability and toxic properties of nAg to rainbow trout juveniles., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Objectives: In pulpal revascularization, a protective material is placed coronal to the blood clot to prevent recontamination and to facilitate osteogenic differentiation of mesenchymal stem cells to produce new dental tissues. Although mineral trioxide aggregate (MTA) has been the material of choice for clot protection, it is easily displaced into the clot during condensation. The present study evaluated the effects of recently introduced calcium silicate cements (Biodentine and TheraCal LC) on the viability and osteogenic differentiation of human dental pulp stem cells (hDPSCs) by comparing with MTA Angelus., Methods: Cell viability was assessed using XTT assay and flow cytometry. The osteogenic potential of hDPSCs exposed to calcium silicate cements was examined using qRT-PCR for osteogenic gene expressions, alkaline phosphatase enzyme activity, Alizarin red S staining and transmission electron microscopy of extracellular calcium deposits. Parametric statistical methods were employed for analyses of significant difference among groups, with α=0.05., Results: The cytotoxic effects of Biodentine and TheraCal LC on hDPSCs were time- and concentration-dependent. Osteogenic differentiation of hDPSCs was enhanced after exposure to Biodentine that was depleted of its cytotoxic components. This effect was less readily observed in hDPSCs exposed to TheraCal LC, although both cements supported extracellular mineralization better than the positive control (zinc oxide-eugenol-based cement)., Significance: A favorable tissue response is anticipated to occur with the use of Biodentine as a blood clot-protecting material for pulpal revascularization. Further investigations with the use of in vivo animal models are required to validate the potential adverse biological effects of TheraCal LC on hDPSCs., (Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Objectives: A Ca(3)SiO(5)-based cement has been developed to circumvent the shortcomings of traditional filling materials. The purpose of this work was to evaluate its genotoxicity, cytotoxicity and effects on the target cells' specific functions., Methods: Ames' test was applied on four Salmonella typhimurium strains. The micronuclei test was studied on human lymphocytes. The cytotoxicity (MTT test), the Comet assay and the effects on the specific functions by immunohistochemistry were performed on human pulp fibroblasts., Results: Ames' test did not show any evidence of mutagenicity. The incidence of lymphocytes with micronuclei and the percentage of tail DNA in the Comet assay were similar to the negative control. The percentage of cell mortality with the new cement as performed with the MTT test was similar to that of biocompatible materials such as mineral trioxide aggregate (MTA) and was less than that obtained with Dycal. The new material does not affect the target cells' specific functions such as mineralization, as well as expression of collagen I, dentin sialoprotein and Nestin., Significance: The new cement is biocompatible and does not affect the specific functions of target cells. It can be used safely in the clinic as a single bulk restorative material without any conditioning treatment. It can be used as a potential alternative to traditionally used posterior restorative materials.

Micro- and nano-mesoporous silicate particles are considered potential drug delivery systems because of their ordered pore structures, large surface areas and the ease with which they can be chemically modified. However, few cytotoxicity or biocompatibility studies have been reported, especially when silicates are administered in the quantities necessary to deliver low-potency drugs. The biocompatibility of mesoporous silicates of particle sizes approximately 150 nm, approximately 800 nm and approximately 4 microm and pore sizes of 3 nm, 7 nm and 16 nm, respectively, is examined here. In vitro, mesoporous silicates showed a significant degree of toxicity at high concentrations with mesothelial cells. Following subcutaneous injection of silicates in rats, the amount of residual material decreased progressively over 3 months, with good biocompatibility on histology at all time points. In contrast, intra-peritoneal and intra-venous injections in mice resulted in death or euthanasia. No toxicity was seen with subcutaneous injection of the same particles in mice. Microscopic analysis of the lung tissue of the mice indicated that death may be due to thrombosis. Although local tissue reaction to mesoporous silicates was benign, they caused severe systemic toxicity. This toxicity might be mitigated by modification of the materials.

Objectives: The use of lithium disilicate dental ceramics is increasing in dentistry and previous reports have suggested that they may have greater biological risks than previously thought. We tested a hypothesis that composition and processing influence the biological properties of these ceramics., Methods: The cytotoxicity of two machined and three pressed lithium disilicate materials (n=6) were tested in vitro using mouse fibroblasts in direct contact with the materials for 72h. Cellular response was estimated by mitochondrial succinate dehydrogenase activity (MTT method). Mitochondrial activity was expressed as a percentage of Teflon controls, then compared to Teflon using 2-sided t-tests (alpha=0.05). Polished materials were aged in artificial saliva and tested for cytotoxicity periodically over 6 weeks, then were repolished (320grit SiC paper), aged and tested again for 4 weeks., Results: All materials significantly (50-70%) suppressed cellular mitochondrial activity in the initial week, but suppression decreased by 25-30% over the next 2 weeks. In weeks 4 and 6 some materials exhibited a cytotoxic 'relapse' of 10-20%. The cytotoxic response was no different for machined or pressed materials, but the presence of ZnO had at least an association with longer-term cytotoxicity and relapse. Repolishing to 320grit did not increase cytotoxicity significantly., Significance: Our results suggest that lithium disilicates are not biologically inert, and that many have a similar cytotoxicity dynamic regardless of small differences in composition or processing.

Mexicali dust (MD) is a mixture of particles of potassium aluminum silicates (98%) and sodium dioxide (2%) that induces pulmonary damage under experimental conditions, and is capable of inducing in vitro chromosomal alterations in exposed lymphocytes. It has been proposed as an atmospheric contaminant with pathogenic potential. Among the chromosomal alterations observed, numeric alterations were predominant. The present study was designed to evaluate the capacity of MD to induce anaphasic changes in the Balb c 3T3 cell line. Chrysotile asbestos was used as a positive control. MD was found to induce abnormal anaphases, and the percentage of abnormalities increased as the dose increased (27.41% with 20 mg/mL, 29.60% with 40 mg/mL and 37.10% with 80 mg/mL). Multipolar anaphases constituted the most frequent alteration (69.1-78.8%), followed by lagging chromosomes (18.2-29.5%) and anaphasic bridges (1.51-5.9%). The anaphasic alterations induced by MD showed differences in comparison to those observed with asbestos, especially for anaphasic bridges (10.4% vs. 1.51%, p<0.05). The capacity of MD to induce alterations reported in the process of chromosomal disjunction could explain the numeric aberrations reported previously by the authors of this paper. Therefore, these data support that MD could act as a clastogenic agent.