Search

This systematic review and meta-analysis evaluated the influence of intermittent fasting (IF) in combination with resistance training (RT) on body composition outcomes. Studies examining IF vs. non-IF diets in individuals performing RT, published up to February 2021, were identified through PubMed, the Cochrane Library, Web of Science, Embase, and SCOPUS databases. Eight studies, including 221 participants were analyzed using a random-effects model to calculate weighted mean differences (WMDs) with 95% confidence intervals (CIs). Results indicated that IF had a significant effect on body mass (WMD = -2.08 kg; 95% CI: -3.04, -1.13), fat mass (WMD = -1.36 kg; 95% CI: -1.94, -0.78), body mass index (WMD = -0.52 kg/m 2 ; 95% CI: -0.85, -0.19), and body fat percentage (WMD = -1.49%; 95% CI: -2.24, -0.74) relative to non-IF diets, without a significant effect for fat-free mass (WMD = -0.27 kg; 95% CI: -0.82, 0.28). The present systematic review and meta-analysis demonstrates potentially beneficial effects of IF in combination with RT for reducing body mass and body fat relative to non-IF control diets, with similar preservation of fat-free mass., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Objectives: Adequate muscle perfusion supports the transport of nutrients, oxygen and hormones into muscle fibers. Aging is associated with a substantial decrease in skeletal muscle capillarization, fiber size and oxidative capacity, which may be improved with regular physical activity. The aim of this study was to investigate the relationship between muscle capillarization and indices of muscle hypertrophy (i.e. lean mass; fiber cross sectional area (CSA)) in older adults before and after 12 weeks of progressive resistance exercise training (RET)., Design: Interventional study SETTING AND PARTICIPANTS: 19 subjects (10 male and 9 female; 71.1 ± 4.3 years; 27.6 ± 3.2 BMI) were enrolled in the study and performed a whole body RET program for 12 weeks. Subjects where then retrospectively divided into a LOW or HIGH group, based on their pre-RET capillary-to-fiber perimeter exchange index (CFPE). Physical activity level, indices of capillarization (capillaries-to-fiber ratio, C:Fi; CFPE index and capillary-to-fiber interface, LC-PF index), muscle hypertrophy, muscle protein turnover and mitochondrial function were assessed before and after RET., Results: Basal capillarization (C:Fi; CFPE and LP-CF index) correlates with daily physical activity level (C:Fi, r = 0.57, p = 0.019; CFPE index, r = 0.55, p = 0.024; LC-PF index, r = 0.56, p = 0.022) and CFPE and LC-PF indices were also positively associated with oxidative capacity (respectively r = 0.45, p = 0.06; r = 0.67, p = 0.004). Following RET, subjects in the HIGH group underwent hypertrophy with significant improvements in muscle protein synthesis and muscle fiber CSA (p < 0.05). However, RET did not promote muscle hypertrophy in the LOW group, but RET significantly increased muscle capillary density (p < 0.05)., Conclusion/implications: Muscle fiber capillarization before starting an exercise training program may be predictive of the muscle hypertrophic response to RET in older adults. Increases in muscle fiber size following RET appear to be blunted when muscle capillarization is low, suggesting that an adequate initial capillarization is critical to achieve a meaningful degree of muscle adaptation to RET., (Copyright © 2019 Elsevier Inc. All rights reserved.)

The surface and substrate of a cross-linked polyethylene (CLPE) liner are designed to achieve resistance against oxidative degradation in the construction of hip joint replacements. In this study, we aimed to evaluate the oxidative degradation caused by lipid absorption of a highly hydrophilic nanometer-scaled thickness layer prepared by grafting a poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) layer and a high-dose gamma-ray irradiated CLPE with vitamin E blending (HD-CLPE[VE]). The HD-CLPE(VE) and PMPC-grafted HD-CLPE(VE) exhibited extremely high oxidation resistance regardless of lipid absorption, even though residual-free radical levels were detectable. The water wettability of the PMPC-grafted CLPE and PMPC-grafted HD-CLPE(VE) surfaces was considerably greater than that of untreated surfaces. The hydrated PMPC-grafted layer also exhibited extremely low solubility for squalene. Lipids such as squalene and cholesterol esters diminished the oxidation resistance of CLPE despite the vitamin E improvement. Notably, the PMPC-grafted surface was resistant to lipid absorption and diffusion as well as subsequent lipid-related oxidative degradation, likely because of the presence of the hydrated PMPC-grafted layer. Together, these results provide preliminary evidence that the resistance against lipid absorption and diffusion of a hydrated PMPC-grafted layer might positively affect the extent of resistance to the in vivo oxidation of orthopedic implants., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The ultimate goal in manipulating the surface and substrate of a cross-linked polyethylene (CLPE) liner is to obtain not only high wear resistance but also high oxidative stability and high-mechanical properties for life-long orthopedic bearings. We have demonstrated the fabrication of highly hydrophilic and lubricious poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC) grafting layer onto the antioxidant vitamin E-blended CLPE (HD-CLPE(VE)) surface. The PMPC grafting layer with a thickness of 100 nm was successfully fabricated on the vitamin E-blended CLPE surface by using photoinduced-radical graft polymerization. Since PMPC has a highly hydrophilic nature, the water wettability and lubricity of the PMPC-grafted CLPE and HD-CLPE(VE) surfaces were greater than that of the untreated CLPE surface. The PMPC grafting contributed significantly to wear reduction in a hip-joint simulator wear test. Despite high-dose gamma-ray irradiation for cross-linking and further UV irradiation for PMPC grafting, the substrate modified by vitamin E blending maintained high-oxidative stability because vitamin E is an extremely efficient radical scavenger. Furthermore, the mechanical properties of the substrate remained almost unchanged even after PMPC grafting or vitamin E blending, or both PMPC grafting and vitamin E blending. In conclusion, the PMPC-grafted HD-CLPE(VE) provided simultaneously high-wear resistance, oxidative stability, and mechanical properties., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

We investigated the production of free radicals on a poly(ether-ether-ketone) (PEEK) substrate under ultraviolet (UV) irradiation. The amount of the ketyl radicals produced from the benzophenone (BP) units in the PEEK molecular structure initially increased rapidly and then became almost constant. Our observations revealed that the BP units in PEEK acted as photoinitiators, and that it was possible to use them to control the graft polymerization of poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC). This "self-initiated surface graft polymerization" method is very convenient in the absence of external photoinitiator. We also investigated the effects of the monomer concentration and UV irradiation time on the extent of the grafted PMPC layer. Furthermore, as an application to improving the durability of artificial hips, we demonstrated the nanometer-scale photoinduced grafting of PMPC onto PEEK and carbon fiber-reinforced PEEK (CFR-PEEK) orthopedic bearing surfaces and interfaces. A variety of test revealed significant improvements in the water wettability, frictional properties, and wear resistance of the surfaces and interfaces., (© 2013 Published by Elsevier Ltd.)

Natural joints rely on fluid thin-film lubrication by the hydrated polyelectrolyte layer of cartilage. However, current artificial joints with polyethylene (PE) surfaces have considerably less efficient lubrication and thus much greater wear, leading to osteolysis and aseptic loosening. This is considered a common factor limiting prosthetic longevity in total hip arthroplasty (THA). However, such wear could be mitigated by surface modification to mimic the role of cartilage. Here we report the development of nanometer-scale hydrophilic layers with varying charge (nonionic, cationic, anionic, or zwitterionic) on cross-linked PE (CLPE) surfaces, which could fully mimic the hydrophilicity and lubricity of the natural joint surface. We present evidence to support two lubrication mechanisms: the primary mechanism is due to the high level of hydration in the grafted layer, where water molecules act as very efficient lubricants; and the secondary mechanism is repulsion of protein molecules and positively charged inorganic ions by the grafted polyelectrolyte layer. Thus, such nanometer-scaled hydrophilic polymers or polyelectrolyte layers on the CLPE surface of acetabular cup bearings could confer high durability to THA prosthetics., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Preventing peritendinous adhesions after surgical repair of tendon is difficult. In order to establish an ideal anti-adhesion material, we prepared a spontaneously forming hydrogel by mixing the aqueous solutions of two polymers, poly(MPC-co-methacrylic acid) (PMA) and amphiphilic poly(MPC-co-n-butyl methacrylate) (PMB), in the presence of Fe(3+). This PMA/PMB/Fe(3+) hydrogel (MPC polymer hydrogel) had a honeycomb microstructure with nanometer-scale pores, which resist cell invasion but allow the passage of cytokines and growth factors for tendon healing. The dissociation rate of the hydrogel could be controlled by changing Fe(3+) concentration, and by examining the viscoelasticity of the hydrogel, we determined the optimal Fe(3+) concentration to be 0.05 M. We then examined the effects of the in situ application of this MPC polymer hydrogel containing 0.05 M Fe(3+) by using two animal models: the rat Achilles tendon model and the chicken flexor digitorum profundus tendon model. In both models, macroscopic and histological observation revealed that peritendinous adhesions were significantly decreased by the hydrogel application. Mechanical analyses revealed that the hydrogel prevented peritendinous adhesions but did not affect the tendon healing. Because of its characteristic microstructure and excellent biocompatibility, we believe that the MPC polymer hydrogel will be ideal for preventing peritendinous adhesions., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Poly(ether-ether-ketone) (PEEK)s are a group of polymeric biomaterials with excellent mechanical properties and chemical stability. In the present study, we demonstrate the fabrication of an antibiofouling and highly hydrophilic high-density nanometer-scaled layer on the surface of PEEK by photo-induced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) without using any photo-initiators, i.e., "self-initiated surface graft polymerization." Our results indicated that the diphenylketone moiety in the polymer backbone acted as a photo-initiator similar to benzophenone. The density and thickness of the poly(MPC) (PMPC)-grafted layer were controlled by the photo-irradiation time and monomer concentration during polymerization, respectively. Since MPC is a highly hydrophilic compound, the water wettability (contact angle <10 degrees) and lubricity (coefficient of dynamic friction <0.01) of the PMPC-grafted PEEK surface were considerably lower than those of the untreated PEEK surface (90 degrees and 0.20, respectively) due to the formation of a PMPC nanometer-scale layer. In addition, the amount (0.05 microg/cm(2)) of BSA adsorbed on the PMPC-grafted PEEK surface was considerably lower, that is more than 90% reduction, compared to that (0.55 microg/cm(2)) for untreated PEEK. This photo-induced polymerization process occurs only on the surface of the PEEK substrate; therefore, the desirable mechanical properties of PEEK would be maintained irrespective of the treatment used., ((c) 2009 Elsevier Ltd. All rights reserved.)

Migration of the artificial femoral head to the inside of the pelvis due to the degeneration of acetabular cartilage has emerged as a serious issue in resurfacing or bipolar hemi-arthroplasty. Surface modification of cobalt-chromium-molybdenum alloy (Co-Cr-Mo) is one of the promising means of improving lubrication for preventing the migration of the artificial femoral head. In this study, we systematically investigated the surface properties, such as lubricity, biocompatibility, and stability of the various modification layers formed on the Co-Cr-Mo with the biocompatible 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer by dip coating or grafting. The cartilage/poly(MPC) (PMPC)-grafted Co-Cr-Mo interface, which mimicked a natural joint, showed an extremely low friction coefficient of <0.01, as low as that of a natural cartilage interface. Moreover, the long-term stability in water was confirmed for the PMPC-grafted layer; no hydrolysis of the siloxane bond was observed throughout soaking in phosphate-buffered saline for 12 weeks. The PMPC-grafted Co-Cr-Mo femoral head for hemi-arthroplasty is a promising option for preserving acetabular cartilage and extending the duration before total hip arthroplasty.

Aseptic loosening of artificial hip joints induced by wear particles from the polyethylene (PE) liner remains the ruinous problem limiting their longevity. We reported here that grafting with a polymer, poly(2-methacryloyloxyethyl phosphorylcholine (MPC)) (PMPC), on the PE liner surface dramatically decreased the wear production under a hip joint simulator condition. We examined that the effect of properties of both PE by cross-linking and femoral head by changing the materials on wearing properties of PE. The PMPC grafting on the liners increased hydrophilicity and decreased friction torque, regardless of the cross-linking of the PE liner or the difference in the femoral head materials. During the hip joint simulator experiments (5 x 10(6) cycles of loading), cross-linking caused a decrease of wear amount and a reduction of the particle size, while the femoral head materials did not affect it. The PMPC grafting abrogated the wear production, confirmed by almost no wear of the liner surface, independently of the liner cross-linking or the femoral head material. We concluded that the PMPC grafting on the PE liner surpasses the liner cross-linking or the change of femoral head materials for extending longevity of artificial hip joints.

The in vivo effects of glycyrrhizin on restoration of liver mass and recovery of liver function were compared with those of epidermal growth factor (EGF), ibuprofen and dexamethasone in 70% partially hepatectomized rats. Hepatic regenerative activity was assessed based on the ratio of liver weight to 100 g body weight, and 5-bromo-2'-deoxyuridine (BrdU) incorporation into hepatocyte DNA in the remnant liver. Glycyrrhizin (50 mg/kg/day, i.p.)- or EGF (1.0 microg/kg/day, i.p.)-treated rats showed an approx. 1.4-fold increase in liver weight/100 g body weight ratio over saline-treated control rats on days 2 and 3 after 70% partial hepatectomy. BrdU labeling index in the remnant regenerating liver was significantly higher in glycyrrhizin- or EGF-treated rats when compared with saline-treated control rats on days 0.5 and 1. Ibuprofen (100 mg/kg/day, i.p.) and dexamethasone (0.1 mg/kg/day, i.p.) did not significantly increase either liver weight/100 g body weight ratio or BrdU labeling index. Serum activity of liver-related transaminases, such as alanine aminotransferase (ALT) and aspartate aminotransferase (AST), elevated rapidly on day 1 and decreased to near pre-operative levels on day 5 after 70% partial hepatectomy in saline-treated control rats. Injection of glycyrrhizin or EGF significantly decreased the elevated serum ALT and AST activities on days 2 and 3 after hepatectomy when compared with saline-treated control rats. The transaminase-lowering effects of glycyrrhizin or EGF were smaller than those of ibuprofen and dexamethasone. These results demonstrate that injection of glycyrrhizin or EGF significantly enhances regeneration of liver mass and function, as well as recovery from the liver damage induced by surgical resection.

Osteolysis caused by wear particles from polyethylene in artificial hip joints is of great concern. Various bearing couple combinations, bearing material improvements, and surface modifications have been attempted to reduce such wear particles. With the aim of reducing the wear and developing a novel artificial hip-joint system, we created a highly lubricious metal-bearing material: A 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer was grafted onto the surface of the cobalt-chromium-molybdenum (Co-Cr-Mo) alloy. For ensuring the long-term retention of poly(MPC) on the Co-Cr-Mo alloy, we used a 4-methacryloxyethyl trimellitate anhydride (4-META) intermediate layer and photo-induced graft polymerization technique to create a strong bonding between the Co-Cr-Mo substrate and the poly(MPC) chain via the 4-META layer. The Co-Cr-Mo alloy was pretreated with nitric acid and O(2) plasma to facilitate efficient interaction between the 4-META carboxyl group and the surface hydroxyl group on the Cr oxide passive layer of the Co-Cr-Mo alloy. After MPC grafting, the MPC unit peaks were clearly observed in the Fourier-transform infrared spectroscopy with attenuated total reflection (FT-IR/ATR) and X-ray photoelectron spectroscopy (XPS) spectra of the Co-Cr-Mo surface. Tribological studies with a pin-on-plate machine revealed that surface MPC grafting markedly lowered the friction coefficient. We concluded that the grafted poly(MPC) layer successfully provided high lubricity to the Co-Cr-Mo surface.

The biomimetic synthetic phospholipid polymer containing a phosphorylcholine group, 2-methacryloyloxyethyl phosphorylcholine (MPC), has improved the surface property of biomaterials. Both hydrophilic and anti-biofouling surfaces were prepared on polydimethylsiloxane (PDMS) with MPC grafted by surface-initiated photo-induced radical polymerization. Benzophenone was used as the photoinitiator. The quantity of the adsorbed initiator on PDMS was determined by UV absorption and ellipsometry. The poly(MPC)-grafted PDMS surfaces were characterized by XPS, ATR-FTIR and static water contact angle (SCA) measurements. The SCA on PDMS decreased from 115 degrees to 25 degrees after the poly(MPC) grafting. The in vitro single protein adsorption on the poly(MPC)-grafted PDMS decreased 50-75% compared to the unmodified PDMS. The surface friction of the poly(MPC)-grafted PDMS was lower than the unmodified PDMS under wet conditions. The oxygen permeability of the poly(MPC)-grafted PDMS was as high as the unmodified PDMS. The tensile property of PDMS was maintained at about 90% of the ultimate stress and strain after the poly(MPC) grafting. The surface-modified PDMS is expected to be a novel medical elastomer which possesses an excellent surface hydrophilicity, anti-biofouling property, oxygen permeability and tensile property.