Search

The therapeutic efficacy of oral nanotherapeutics against colorectal cancer (CRC) is restricted by inadequate drug accumulation, immunosuppressive microenvironment, and intestinal microbiota imbalance. To overcome these challenges, we elaborately constructed 6-gingerol (Gin)-loaded magnetic mesoporous silicon nanoparticles and functionalized their surface with mulberry leaf-extracted lipids (MLLs) and Pluronic F127 (P 127 ). In vitro experiments revealed that P 127 functionalization and alternating magnetic fields (AMFs) promoted internalization of the obtained P 127 -MLL@Gins by colorectal tumor cells and induced their apoptosis/ferroptosis through Gin/ferrous ion-induced oxidative stress and magneto-thermal effect. After oral administration, P 127 -MLL@Gins safely passed to the colorectal lumen, infiltrated the mucus barrier, and penetrated into the deep tumors under the influence of AMFs. Subsequently, the P 127 -MLL@Gin (+ AMF) treatment activated antitumor immunity and suppressed tumor growth. We also found that this therapeutic modality significantly increased the abundance of beneficial bacteria (e.g., Bacillus and unclassified-c-Bacilli), reduced the proportions of harmful bacteria (e.g., Bacteroides and Alloprevotella), and increased lipid oxidation metabolites. Strikingly, checkpoint blockers synergistically improved the therapeutic outcomes of P 127 -MLL@Gins (+ AMF) against orthotopic and distant colorectal tumors and significantly prolonged mouse life spans. Overall, this oral therapeutic platform is a promising modality for synergistic treatment of CRC., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The treatment efficacies of conventional medications against colorectal cancer (CRC) are restricted by a low penetrative, hypoxic, and immunosuppressive tumor microenvironment. To address these restrictions, we developed an innovative antitumor platform that employs calcium overload-phototherapy using mitochondrial N770-conjugated mesoporous silica nanoparticles loaded with CaO 2 (CaO 2 -N770@MSNs). A loading level of 14.0 wt% for CaO 2 -N770@MSNs was measured, constituting an adequate therapeutic dosage. With the combination of oxygen generated from CaO 2 and hyperthermia under near-infrared irradiation, CaO 2 -N770@MSNs penetrated through the dense mucus, accumulated in the colorectal tumor tissues, and inhibited tumor cell growth through endoplasmic reticulum stress and mitochondrial damage. The combination of calcium overload and phototherapy revealed high therapeutic efficacy against orthotopic colorectal tumors, alleviated the immunosuppressive microenvironment, elevated the abundance of beneficial microorganisms (e.g., Lactobacillaceae and Lachnospiraceae), and decreased harmful microorganisms (e.g., Bacteroidaceae and Muribaculaceae). Moreover, together with immune checkpoint blocker (αPD-L1), these nanoparticles showed an ability to eradicate both orthotopic and distant tumors, while potentiating systemic antitumor immunity. This treatment platform (CaO 2 -N770@MSNs plus αPD-L1) open a new horizon of synergistic treatment against hypoxic CRC with high killing power and safety., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Despite significant achievements in the understanding and treatment of cancer, it remains a major burden. Traditional therapeutic approaches based on the 'one-size-fits-all' paradigm are becoming obsolete, as demonstrated by the increasing number of patients failing to respond to treatments. In contrast, more precise approaches based on individualized genetic profiling of tumors have already demonstrated their potential. However, even more personalized treatments display shortcomings mainly associated with systemic delivery, such as low local drug efficacy or specificity. A large amount of effort is currently being invested in developing precision medicine-based strategies for improving the efficiency of cancer theranostics and modelling, which are envisioned to be more accurate, standardized, localized, and less expensive. To this end, interdisciplinary research fields, such as biomedicine, material sciences, pharmacology, chemistry, tissue engineering, and nanotechnology, must converge for boosting the precision cancer ecosystem. In this regard, precision biomaterials have emerged as a promising strategy to detect, model, and treat cancer more efficiently. These are defined as those biomaterials precisely engineered with specific theranostic functions and bioactive components, with the possibility to be tailored to the cancer patient needs, thus having a vast potential in the increasing demand for more efficient treatments. In this review, we discuss the latest advances in the field of precision biomaterials in cancer research, which are expected to revolutionize disease management, focusing on their uses for cancer modelling, detection, and therapeutic applications. We finally comment on the needed requirements to accelerate their application in the clinic to improve cancer patient prognosis., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The efficacy of current therapies for skeletal muscle disorders/injuries are limited urging the need for new treatments. Skeletal muscle tissue engineered platforms represent a promising tool to shed light on the pathophysiology of skeletal muscle disorders/injuries and to investigate the efficacy of new therapies. Herein, we developed a skeletal muscle platform composed of aligned and differentiated myoblasts on micropatterned gellan gum (GG)-based hydrogels tailored with a laminin-derived peptide. To this aim, the binding of murine skeletal muscle cells (C2C12) to different laminin-derived peptides (CIKVAVS (V), KNRLTIELEVRTC (T), and RKRLQVQLSIRTC (Q)) and the binding of laminin-derived peptides to chemically functionalized GG was studied. C2C12-binding to peptide V, T and Q was 10%, 48% and 25%, whereas the peptide tethering to GG was 60%, 40% and 31%, respectively. Peptide-biofunctionalized hydrogels prepared with different polymer content showed different mechanics and peptide exposure at hydrogel surface. Cellular adhesion was detected in all hydrogel formulations, but spreading and differentiation was only promoted in peptide Q-biofunctionalized hydrogels and preferably in stiffer hydrogels. Myoblast alignment was promoted in micropatterned hydrogel surfaces. Overall, the engineered skeletal muscle herein proposed can be further explored as a platform to better understand skeletal muscle disorders/injuries and to screen new therapies., (Copyright © 2021. Published by Elsevier Ltd.)

Cancer is a multifaceted pathology, where cellular and acellular players interact to drive cancer progression and, in the worst-case, metastasis. The current methods to investigate the heterogeneous nature of cancer are inadequate, since they rely on 2D cell cultures and animal models. The cell line-based drug efficacy and toxicity assays are not able to predict the tumor response to anti-cancer agents and it is already widely discussed how molecular pathway are not recapitulated in vitro so called flat biology. On the other side, animal models often fail to detect the side-effects of drugs, mimic the metastatic progression or the interaction between cancer and immune system, due to biologic difference in human and animals. Moreover, ethical and regulatory issues limit animal experimentation. Every year pharma/biotech companies lose resources in drug discovery and testing processes that are successful only in 5% of the cases. There is an urgent need to validate accurate and predictive platforms in order to enhance drug-testing process taking into account the physiopathology of the tumor microenvironment. Three dimensional in vitro tumor models could enhance drug manufactures in developing effective drugs for cancer diseases. The 3D in vitro cancer models can improve the predictability of toxicity and drug sensitivity in cancer. Despite the demonstrated advantages of 3D in vitro disease systems when compared to 2D culture and animal models, they still do not reach the standardization required for preclinical trials. This review highlights in vitro models that may be used as preclinical models, accelerating the drug development process towards more precise and personalized standard of care for cancer patients. We describe the state-of-the art of 3D in vitro culture systems, with a focus on how these different approaches could be coupled in order to achieve a compromise between standardization and reliability in recapitulating tumor microenvironment and drug response., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Silk fibroin (SF) is a natural fibrous polymer with strong potential for many biomedical applications. SF has attracted interest in the field of bone tissue engineering due to its extraordinary characteristics in terms of elasticity, flexibility, biocompatibility and biodegradability. However, low osteogenic capacity has limited applications for SF in the orthopedic arena unless suitably functionalized. Hydroxyapatite (HAp) is a well-established bioceramic with biocompatibility and appropriate for constructing orthopedic and dental substitutes. However, HAp ceramics tend to be brittle which can restrict applications in the repair of load-bearing tissues such as bones. Therefore, blending SF and HAp combines the useful properties of both materials as bone constructs for tissue engineering, the subject of this review., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Most cancer patients do not die from the primary tumor but from its metastasis. Current in vitro and in vivo cancer models are incapable of satisfactorily predicting the outcome of various clinical treatments on patients. This is seen as a serious limitation and efforts are underway to develop a new generation of highly predictive cancer models with advanced capabilities. In this regard, organ-on-chip models of cancer metastasis emerge as powerful predictors of disease progression. They offer physiological-like conditions where the (hypothesized) mechanistic determinants of the disease can be assessed with ease. Combined with high-throughput characteristics, the employment of organ-on-chip technology would allow pharmaceutical companies and clinicians to test new therapeutic compounds and therapies. This will permit the screening of a large battery of new drugs in a fast and economic manner, to accelerate the diagnosis of the disease in the near future, and to test personalized treatments using cells from patients. In this review, we describe the latest advances in the field of organ-on-chip models of cancer metastasis and their integration with advanced imaging, screening and biosensing technologies for future precision medicine applications. We focus on their clinical applicability and market opportunities to drive us forward to the next generation of tumor models for improved cancer patient theranostics., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

In recent years the potential application of nanocomposite biomaterials in tissue engineering field is gaining importance because of the combined features of all the individual components. A bottom-up approach is acquired in this study to recreate the bone microenvironment. The regenerated silk protein fibroin obtained from nonmulberry tropical tasar Antheraea mylitta species is reinforced with functionalized carbon nano fiber (CNF) and the composite sponges are fabricated using facile green aqueous based method. Biophysical investigations show that the matrices are porous and simultaneously bioactive when incubated in simulated body fluid. The reinforcement of CNF influences the mechanical property of the matrices by increasing the compressive modulus up to 46.54 MPa (∼4.3 times of the control fibroin sponge) in hydrated state, which is higher than the minimum required human trabecular bone modulus (10 MPa). The composite matrices are found to be non-hemolytic as well as cytocompatible. The growth factors (BMP-2 and TGF-β1) loaded composites show sustained release kinetics and an early attachment, growth, proliferation, and osteogenic differentiation of the osteoblasts and mesenchymal stem cells. The matrices are immunocompatible as evidenced by minimal release of pro-inflammatory cytokines both in vitro and in vivo. In order to support the in vitro study, in vivo analysis of new bone formation within the implants is performed through radiological, μ-CT, fluorochrome labeling and histological analysis, which show statistically better bone formation on growth factor loaded composite scaffolds. The study clearly shows the potential attributes of these composite matrices as an extra cellular matrix for supporting successful osseointegration process., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Microenvironment around tumor cells plays an important role in its malignancy or invasiveness. Hyaluronan (HA), a major component of extracellular matrix is found to be elevated in most of cancerous niche/microenvironment and performs regulatory role in the progression of tumors and metastasis. Overexpression of the hyaladherin, hyaluronan-binding protein 1 (HABP1) in the hepatocarcinoma cells (HepG2) termed as HepR21 leads to enhanced cell proliferation with increased HA 'pool' associated with HA 'cables' indicating elevated tumorous potential under 2D culture conditions. For in vitro experimentation, scaffold based three dimensional niche modeling may have greater acceptance than conventional 2D culture condition. Thus, we have examined the influence of intrinsic properties of non-mulberry tropical tasar silk fibroin on the HepR21 cells in order to develop a 3D hepatocarcinoma construction to act as model. The scaffold of tasar silk fibroin of Antheraea mylitta when efficiently loaded with transformed hepatocarcinoma cells, HepR21; exhibits enhanced adhesiveness, viability, metabolic activity, proliferation and enlarged cellular morphology in 3D compared to its parent cell line HepG2, supporting the earlier observation made in 2D system. In addition, formation of multicellular aggregates, the indicator of tumor progression is also revealed in silk based 3D culture conditions. Further, the use of 4-MU (a hyaluronan synthase inhibitor) on HepR21 cells reduces the HA level and downregulates the expression of growth promoting factors like pAKT and PKC; while upregulating the expression of the tumor suppressor p53. Thus, 4-MU efficiently reduces the tumor potency associated with increased HA pool as well as HA cables and the effect of 4-MU doubling up as an anticancer agent in 2D and 3D are also comparable. The in vitro 3D multicellular model demonstrates the insight of hepatocarcinoma progression and offers the predictability of cellular response to transfection efficacy, drug treatment and therapeutic intervention., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

A promising strategy to influence the osseointegration process around orthopaedic titanium implants is the immobilization of bioactive molecules. This recruits appropriate interaction between the surface and the tissue by directing cells adhesion, proliferation, differentiation and active matrix remodelling. In this study, we aimed to investigate the functionalization of metallic implant titanium with silk protein sericin. Titanium surface was immobilized with non-mulberry Antheraea mylitta sericin using glutaraldehyde as crosslinker. To analyse combinatorial effects the sericin immobilized titanium was further conjugated with integrin binding peptide sequence Arg-Gly-Asp (RGD) using ethyl (dimethylaminopropyl) carbodiimide and N-hydroxysulfosuccinimide as coupling agents. The surface of sericin immobilized titanium was characterized biophysically. Osteoblast-like cells were cultured on sericin and sericin/RGD functionalized titanium and found to be more viable than those on pristine titanium. The enhanced adhesion, proliferation, and differentiation of osteoblast cells were observed. RT-PCR analysis showed that mRNA expressions of bone sialoprotein, osteocalcin and alkaline phosphatase were upregulated in osteoblast cells cultured on sericin and sericin/RGD immobilized titanium substrates. Additionally, no significant amount of pro-inflammatory cytokines TNF-α, IL-1β and nitric oxide production were recorded when macrophages cells and osteoblast-macrophages co culture cells were grown on sericin immobilized titanium. The findings demonstrate that the sericin immobilized titanium surfaces are potentially useful bioactive coated materials for titanium-based medical implants., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

In situ forming tissue sealants are advantageous due to ease in application, complete coverage of defect site and assured comfort levels to patients. The interconnected three-dimensional hydrophilic networks perfectly manage typical dermal wounds by suitably scaffolding skin fibroblast, diffusing the nutrients, therapeutics and exudates while still maintaining an adequately moist environment. We evaluate the cell homing ability of semi-interpenetrating non-mulberry tropical tasar silk sericin/polyacrylamide hydrophilic network with a keen understanding of its network characteristics and correlation of protein concentration with the performance as cell scaffold. Interconnectivity of porous networks observed through scanning electron micrograph revealed pore sizes ranging from 23 to 52 μm. The enhanced β-sheet content with the increasing sericin concentration in far red spectroscopy study supported their corresponding improved compressive strength. These semi-interpenetrating networks were found to possess a maximum fluid uptake of 112% of its weight, hence preventing the accumulation of exudates at the wound area. The present systems appear to possess characteristics like rapid gelation (~5min) at 37 °C, 98% porosity enabling the migration of fibroblasts during healing (observed through confocal and scanning electron micrographs), cell adhesion together with the absence of any cyto-toxic effect suggesting its potential as in situ tissue sealants. The compressive strength up to 61 kPa ensured ease in handling even when wet. The results prove the suitability to use non-mulberry tasar cocoon silk sericin/polyacrylamide semi-interpenetrating network as a reconstructive dermal sealant., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Adult bone marrow derived mesenchymal stem cells are undifferentiated, multipotential cells and have the potential to differentiate into multiple lineages like bone, cartilage or fat. In this study, polyelectrolyte complex silk fibroin/chitosan blended porous scaffolds were fabricated and examined for its ability to support in vitro chondrogenesis of mesenchymal stem cells. Silk fibroin matrices provide suitable substrate for cell attachment and proliferation while chitosan are promising biomaterial for cartilage repair due to it's structurally resemblance with glycosaminoglycans. We compared the formation of cartilaginous tissue in the silk fibroin/chitosan blended scaffolds with rat mesenchymal stem cells and cultured in vitro for 3 weeks. Additionally, pure silk fibroin scaffolds of non-mulberry silkworm, Antheraea mylitta and mulberry silkworm, Bombyx mori were also utilized for comparative studies. The constructs were analyzed for cell attachment, proliferation, differentiation, histological and immunohistochemical evaluations. Silk fibroin/chitosan blended scaffolds supported the cell attachment and proliferation as indicated by SEM observation, Confocal microscopy and metabolic activities. Alcian Blue and Safranin O histochemistry and expression of collagen II indicated the maintenance of chondrogenic phenotype in the constructs after 3 weeks of culture. Glycosaminoglycans and collagen accumulated in all the scaffolds and was highest in silk fibroin/chitosan blended scaffolds and pure silk fibroin scaffolds of A. mylitta. Chondrogenic differentiation of MSCs in the silk fibroin/chitosan and pure silk fibroin scaffolds was evident by real-time PCR analysis for cartilage-specific ECM gene markers. The results represent silk fibroin/chitosan blended 3D scaffolds as suitable scaffold for mesenchymal stem cells-based cartilage repair., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

The human heart cannot regenerate after an injury. Lost cardiomyocytes are replaced by scar tissue resulting in reduced cardiac function causing high morbidity and mortality. One possible solution to this problem is cardiac tissue engineering. Here, we have investigated the suitability of non-mulberry silk protein fibroin from Indian tropical tasar Antheraea mylitta as a scaffold for engineering a cardiac patch in vitro. We have tested cell adhesion, cellular metabolic activity, response to extracellular stimuli, cell-to-cell communication and contractility of 3-days postnatal rat cardiomyocytes on silk fibroin. Our data demonstrate that A. mylitta silk fibroin exhibits similar properties as fibronectin, a component of the natural matrix for cardiomyocytes. Comparison to mulberry Bombyx mori silk protein fibroin shows that A. mylitta silk fibroin is superior probably due to its RGD domains. 3D scaffolds can efficiently be loaded with cardiomyocytes resulting in contractile patches. In conclusion, our findings demonstrate that A. mylitta silk fibroin 3D scaffolds are suitable for the engineering of cardiac patches., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

The repair of articular cartilage defects poses a continuing challenge. Cartilage tissue engineering through the culture of chondrocytes seeded in 3D porous scaffolds has the potential for generating constructs that repair successfully. It also provides a platform to study scaffold-cell and cell-cell interactions. The scaffold affects the growth and morphology of cells growing on it, and concomitantly, cells affect the properties of the resultant tissue construct. Silk fibroin protein from Antheraea mylitta, a non-mulberry Indian tropical tasar silkworm, is a potential biomaterial for diverse applications due to its widespread versatility as a mechanically robust, biocompatible, tissue engineering material. Analysis of silk fibroin scaffolds seeded with varying initial densities (25, 50 and 100 million cells/ml) and cultured for 2 weeks showed that thickness and wet weight increased by 60-70% for the highest cell density, and DNA, GAG and collagen content of the cartilaginous constructs increased with increasing cell density. Mechanical characterization of the constructs elucidated that the highest density constructs had compressive stiffness and modulus 4-5 times that of cell-free scaffolds. The present results indicate the importance of cell seeding density in the rapid formation of a functional cartilaginous tissue., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

The use of cell-scaffold constructs is a promising tissue engineering approach to repair cartilage defects and to study cartilaginous tissue formation. In this study, silk fibroin/chitosan blended scaffolds were fabricated and studied for cartilage tissue engineering. Silk fibroin served as a substrate for cell adhesion and proliferation while chitosan has a structure similar to that of glycosaminoglycans, and shows promise for cartilage repair. We compared the formation of cartilaginous tissue in silk fibroin/chitosan blended scaffolds seeded with bovine chondrocytes and cultured in vitro for 2 weeks. The constructs were analyzed for cell viability, histology, extracellular matrix components glycosaminoglycan and collagen types I and II, and biomechanical properties. Silk fibroin/chitosan scaffolds supported cell attachment and growth, and chondrogenic phenotype as indicated by Alcian Blue histochemistry and relative expression of type II versus type I collagen. Glycosaminoglycan and collagen accumulated in all the scaffolds and was highest in the silk fibroin/chitosan (1:1) blended scaffolds. Static and dynamic stiffness at high frequencies was higher in cell-seeded constructs than non-seeded controls. The results suggest that silk/chitosan scaffolds may be a useful alternative to synthetic cell scaffolds for cartilage tissue engineering., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Celecoxib has shown potential anticancer activity against most carcinomas, especially in patients with familial adenomatous polyposis and precancerous disease of the colon. However, serious side effects of celecoxib restrict its generalized use for cancer therapy. In order to resolve these issues and develop an alternative strategy/preliminary approach, chitosan modified hydroxyapatite nanocarriers-mediated celecoxib delivery represents a viable strategy. We characterized the nanoparticle for morphology, particle size, zeta potential, crystalinity, functional group analysis, entrapment efficiency, drug release and hemocompatibility. The effects of celecoxib-loaded nanoparticles on colon cancer cell proliferation, morphology, cytoskeleton, cellular uptake and apoptosis were analysed in vitro. Further, we evaluated the antiproliferative, apoptotic and tumor inhibitory efficacy of celecoxib-loaded nanocarriers in a nude mouse human xenograft model. Nanoparticles exhibited small, narrow hydrodynamic size distributions, hemocompatibility, high entrapment efficiencies and sustained release profiles. In vitro studies showed significant antiproliferation, apoptosis and time-dependent cytoplasmic uptake of celecoxib-loaded Hap-Cht nanoparticles in HCT 15 and HT 29 colon cancer cells. Additional in vivo studies demonstrated significantly greater inhibition of tumor growth following treatment with this modified nanoparticle system. The present study indicates a promising, effective and safe means of using celecoxib, and potentially other therapeutic agents for colon cancer therapy., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

3D in vitro model systems that are able to mimic the in vivo microenvironment are now highly sought after in cancer research. Antheraea mylitta silk fibroin protein matrices were investigated as potential biomaterial for in vitro tumor modeling. We compared the characteristics of MDA-MB-231 cells on A. mylitta, Bombyx mori silk matrices, Matrigel, and tissue culture plates. The attachment and morphology of the MDA-MB-231 cell line on A. mylitta silk matrices was found to be better than on B. mori matrices and comparable to Matrigel and tissue culture plates. The cells grown in all 3D cultures showed more MMP-9 activity, indicating a more invasive potential. In comparison to B. mori fibroin, A. mylitta fibroin not only provided better cell adhesion, but also improved cell viability and proliferation. Yield coefficient of glucose consumed to lactate produced by cells on 3D A. mylitta fibroin was found to be similar to that of cancer cells in vivo. LNCaP prostate cancer cells were also cultured on 3D A. mylitta fibroin and they grew as clumps in long term culture. The results indicate that A. mylitta fibroin scaffold can provide an easily manipulated microenvironment system to investigate individual factors such as growth factors and signaling peptides, as well as evaluation of anticancer drugs., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

With the emergence of nanotechnology, researchers become more interested in studying the unique properties of nanoscale materials. Electrospinning, an electrostatic fiber fabrication technique has evinced more interest and attention in recent years due to its versatility and potential for applications in diverse fields. The notable applications include in tissue engineering, biosensors, filtration, wound dressings, drug delivery, and enzyme immobilization. The nanoscale fibers are generated by the application of strong electric field on polymer solution or melt. The non-wovens nanofibrous mats produced by this technique mimics extracellular matrix components much closely as compared to the conventional techniques. The sub-micron range spun fibers produced by this process, offer various advantages like high surface area to volume ratio, tunable porosity and the ability to manipulate nanofiber composition in order to get desired properties and function. Over the years, more than 200 polymers have been electrospun for various applications and the number is still increasing gradually with time. With these in perspectives, we aim to present in this review, an overview of the electrospinning technique with its promising advantages and potential applications. We have discussed the electrospinning theory, spinnable polymers, parameters (solution and processing), which significantly affect the fiber morphology, solvent properties and melt electrospinning (alternative to solution electrospinning). Finally, we have focused on varied applications of electrospun fibers in different fields and concluded with the future prospects of this efficient technology., ((c) 2010 Elsevier Inc. All rights reserved.)

This study investigates the potential of 3D silk scaffolds fabricated using tropical tasar non-mulberry, Antheraea mylitta and mulberry, Bombyx mori silk gland fibroin proteins as substrate for osteogenic and adipogenic differentiation of rat bone marrow cells (BMCs). The scaffolds are mechanically robust and show homogenous pore distribution with high porosity and interconnected pore walls. Low immunogenicity of fabricated silk scaffolds as estimated through TNF alpha release indicates its potential as future biopolymeric graft material. Rat bone marrow cells cultured on scaffolds for 28 days under static conditions in osteogenic and adipogenic media respectively led to induction of differentiation. Proliferation and spreading of fibroblasts and bone marrow cells on silk scaffolds were observed to be dependent on scaffold porosity as revealed through confocal microscopic observations. Histological analysis shows osteogenic differentiation within silk scaffolds resulting in extensive mineralization in the form of deposited nodules as observed through intense Alizarin Red S staining. Similarly, adipogenesis was marked by the presence of lipid droplets within scaffolds on staining with Oil Red O. Real-time PCR studies reveal higher transcript levels for osteopontin (Spp1), osteocalcin (Bglap2) and osteonectin (Sparc) genes under osteogenic conditions. Similarly, upregulated adipogenic gene expression was observed within A. mylitta and B. mori scaffolds under adipogenic conditions for Peroxisome proliferator activated receptor gamma (PPARgamma2), lipoprotein lipase (LPL) and adipocyte binding protein (aP2) genes. The results suggest suitability of silk fibroin protein 3D scaffolds as natural biopolymer for potential bone and adipose tissue engineering applications.

3D scaffolds based on embedding drug loaded calcium alginate beads within silk fibroin protein were fabricated for investigating controlled dual drug release. The 3D matrices were evaluated for in vitro release using two different molecular weight model compounds, bovine serum albumin (66 kDa) and FITC-Inulin (3.9 kDa). The model compound release profiles revealed dependence on molecular weight of encapsulated model drugs for sustained release. Further, silk fibroin protein blended calcium alginate beads resulted in prolonged drug release without initial bursts for 35 days as compared to calcium alginate beads without silk fibroin as control. The release kinetics were further tested as a function of wt% silk content for scaffold fabrication suggesting their possible role in restricting initial burst and leading to sustainable release of compounds for prolong time. Silk coatings on calcium alginate beads provided mechanically stable shells as well as a diffusion barrier to the encapsulated protein drugs thus controlling their release. Scanning electron microscopic observations were carried out to assess cellular viability and biocompatibility of bead embedded-silk 3D scaffolds using fibroblast cells. The results highlight the versatile and tunable properties of calcium alginate embedded fibroin 3D scaffolds making them exciting candidate for the controlled release of a wide spectrum of bioactive molecules from a single delivery vehicle.

The present study describes a semi-interpenetrating network hydrogel fabricated using silk fibroin/polyacrylamide for controlled drug delivery applications. Hydrogels were synthesized using varied ratios of silk fibroin/acrylamide mixtures crosslinked by N,N'-Methylenebisacrylamide. Fourier-Transform Infrared analysis was performed suggesting beta sheet transition of silk fibroin with hydrogels. Scanning electron microscopy revealed microporous surface with maximum pore size of 50+/-11 microm. Rheological properties along with swellability, degradation, sol fraction estimation, equilibrium water content and swelling kinetics were evaluated. Compressive strength of 241.9+/-5.5 kPa was observed suggesting mechanically stronger gels. MTT assay showed biocompatibility and absence of deleterious effects of hydrogel on cell viability and functionality. In vitro release studies using two model compounds i.e. trypan blue dye and FITC-inulin reveal their sustained release from the fabricated hydrogel constructs.

Pore architecture in 3D polymeric scaffolds is known to play a critical role in tissue engineering as it provides the vital framework for the seeded cells to organize into a functioning tissue. In this report, we investigated the effects of different freezing temperature regimes on silk fibroin protein 3D scaffold pore microstructure. The fabricated scaffolds using freeze-dry technique were used as a 3D model to monitor cell proliferation and migration. Pores of 200-250microm diameter were formed by slow cooling at temperatures of -20 and -80 degrees C but were found to be limited in porosity and pore interconnectivity as observed through scanning electron microscopic images. In contrast, highly interconnected pores with 96% porosity were observed when silk solutions were rapidly frozen at -196 degrees C. A detailed study was conducted to assess the affect of pore size, porosity and interconnectivity on human dermal fibroblast cell proliferation and migration on these 3D scaffolds using confocal microscopy. The cells were observed to migrate within the scaffold interconnectivities and were found to reach scaffold periphery within 28 days of culture. Confocal images further confirmed normal cell attachment and alignment of actin filaments within the porous scaffold matrix with well-developed nuclei. This study indicates rapid freeze-drying technique as an alternative method to fabricate highly interconnected porous scaffolds for developing functional 3D silk fibroin matrices for potential tissue engineering, biomedical and biotechnological applications.

Surface properties of implanted biomaterials can cause fibrotic tissue reactions by stimulating differentiation of host fibroblasts into contractile myofibroblasts. Silk fibroin (SF) protein has been used as biomaterial in pure and blended form. however, its effect on myofibroblast differentiation remains elusive. We here conjugated SF with lactose using cyanuric chloride as coupling spacer. NMR spectroscopy and the conjugates ability to agglomerate Abrus precatorius agglutinin verified efficient conjugation. Two-dimensional films and three-dimensional scaffolds produced from pure and lactose-conjugated SF solutions were tested as culture substrates for subcutaneous fibroblasts and myofibroblasts. Lactose-conjugated SF substrates mediated higher adhesion, proliferation and viability of fibroblastic cells than pure SF. This SF film composition promotes better attachment of fibroblasts than myofibroblasts. Pro-fibrotic cytokine TGFbeta1 was ineffective in inducing fibroblast-to-myofibroblast differentiation on such substrates. Pre-differentiated myofibroblasts lost their contractile phenotype within a few days of being cultured on lactose-conjugated SF. Myofibroblast differentiation was also suppressed by growth in three-dimensional lactose-conjugated SF scaffolds that, however, support population with fibroblasts. We propose that this biomaterial will promote tissue integration without causing a fibrotic host reaction.

The fibroin protein isolated from the posterior silkgland of the tropical Saturniid silkworm Antheraea mylitta, was solubilized in lithium dodecyl sulfate and purified by gel filtration. The major fraction from gel filtration was analyzed by SDS-PAGE under non-reducing and reducing conditions. One major protein band of ca 395 kDa was obtained under non-reducing conditions and a doublet band of approximately 197 kDa under reducing conditions. The appearance of a single spot in two-dimensional electrophoresis confirmed the purity of the protein indicating that it may be a homodimeric protein of two similar sized polypeptides. Amino acid composition analysis showed that, like other Saturniid fibroins, it is rich in glycine, alanine and serine amino acids. N-terminal amino acid sequence shows significant homology with other Antheraea species. The enzymatic deglycosylation analysis indicates that the fibroin protein is glycosylated and the oligosaccharides are O-linked to the protein backbone by N-acetylgalactoseamine moiety which conforms to a Core 1 mucin-type glycosylation pattern.