58 results on '"Yang, Jian Feng"'
Search Results
2. Performance Enhancement in RMI-Fabricated SiC-Ti3SiC2 Composites via Microstructure Optimization
3. Classification of PRSS1 variants responsible for chronic pancreatitis: An expert perspective from the Franco-Chinese GREPAN Study Group
4. Analysis on causes of chemical industry accident from 2015 to 2020 in Chinese mainland: A complex network theory approach
5. Preparation and properties of ultralight fibrous β-Si3N4 3D scaffolds with honeycomb-like structure by directional freeze-casting
6. Preparation and characterization of lightweight SiC frameworks by connecting SiC fibers with SiC joints
7. Column-orthogonal nearly strong orthogonal arrays
8. Endoscopic radiofrequency ablation plus plastic stent placement versus stent placement alone for unresectable extrahepatic biliary cancer: a multicenter randomized controlled trial
9. Simultaneous improvement in porosity and strength of porous β-Si3N4 ceramics by formation of ultrafine fibrous grains
10. Optimal maximin L2-distance Latin hypercube designs
11. Mixed 2- and 2r-level fractional factorial split-plot designs with clear effects
12. Synthesis and mechanical properties of highly porous ultrafine-grain Si3N4 ceramics via carbothermal reduction-nitridation combined with liquid phase sintering
13. High-performance epoxy composites reinforced with three-dimensional Al2O3 ceramic framework
14. The alignment of AlN platelets in polymer matrix and its anisotropic thermal properties
15. Preparation and properties of reaction bonded silicon carbide (RB-SiC) ceramics with high SiC percentage by two-step sintering using compound carbon sources
16. Influence of SiO2 contents on the microstructure and mechanical properties of lithium disilicate glass-ceramics by reaction sintering
17. Development and application of equipment maintenance and safety integrity management system
18. Construction of (nearly) orthogonal sliced Latin hypercube designs
19. Enhanced thermal conductivity of polymer composites via hybrid fillers of anisotropic aluminum nitride whiskers and isotropic spheres
20. Pulse electric current sintering of 3D interpenetrating SiC/Al composites
21. Investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles
22. Silicon carbide-based foams derived from foamed SiC-filled phenolic resin by reactive infiltration of silicon
23. Construction of main-effect plans orthogonal through the block factor
24. Numerical investigation on combined single shell-pass shell-and-tube heat exchanger with two-layer continuous helical baffles
25. Synthesis of rod-like β-Si3N4 seed crystals with tailored morphology
26. Gas permeability and adsorbability of the glass-bonded porous silicon carbide ceramics with controlled pore size
27. Numerical investigation on shell-side performances of combined parallel and serial two shell-pass shell-and-tube heat exchangers with continuous helical baffles
28. Improved densification and properties of pressureless-sintered lithium disilicate glass-ceramics
29. High-performance, reaction sintered lithium disilicate glass–ceramics
30. Effect of porous Si3N4 preform on the mechanical properties of Si3N4/Al composites with interpenetrating network structure
31. Construction of sliced (nearly) orthogonal Latin hypercube designs
32. Pulse electric current sintering of cubic boron nitride/tungsten carbide–cobalt (cBN/WC–Co) composites: Effect of cBN particle size and volume fraction on their microstructure and properties
33. Effect of LiAlSiO4 particle size on the properties of LAS/SiC porous ceramics with near zero thermal expansion
34. Effects of sealing strips on shell-side flow and heat transfer performance of a heat exchanger with helical baffles
35. Effect of glassy bonding materials on the properties of LAS/SiC porous ceramics with near zero thermal expansion
36. Modeling the Potential Geographic Distribution of Black Pepper (Piper nigrum) in Asia Using GIS Tools
37. Electrochemical and corrosion behaviors of pure Mg in neutral 1.0% NaCl solution
38. High heat load properties of actively cooled W/CuCrZr mock-ups by diffusion bonding with Ni or Ti interlayer
39. High heat load properties of actively cooled W/CuCrZr mock-ups by cladding and diffusion bonding with a two-step process
40. Fabrication of highly dense pure SiC ceramics via the HTPVT method
41. Isomorphism check in fractional factorial designs via letter interaction pattern matrix
42. Small Box–Behnken design
43. Microstructure control and mechanical properties of porous silicon nitride ceramics
44. Microstructure characterization of hot-pressed β-silicon nitride containing β-Si3N4 seeds
45. Manufacture of fibrous β-Si3N4-reinforced biomorphic SiC matrix composites for bioceramic scaffold applications
46. Characterization of porous silicon nitride ceramics using bentonite as binder and sintering additive
47. Use of spray technique to prepare Ni/Al-layered double hydroxides
48. Preface
49. Effects of carbon source on microstructural evolution and sintering behavior of porous silicon nitride ceramics
50. Fractional factorial split-plot designs containing clear effects
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.