Search

An economically viable magnetic-confinement fusion reactor will require steady-state operation and high areal power density for sufficient energy output, and elevated wall/blanket temperatures for efficient energy conversion. These three requirements frame, and couple to, the challenge of plasma–material interaction (PMI) for fusion energy sciences. Present and planned tokamaks are not designed to simultaneously meet these criteria. A new and expanded set of dimensionless figures of merit for PMI have been developed. The key feature of the scaling is that the power flux across the last closed flux surface P / S ≃ 1 MW m −2 is to be held constant, while scaling the core volume-averaged density weakly with major radius, n ∼ R −2/7 . While complete similarity is not possible, this new “ P / S ” or “PMI” scaling provides similarity for the most critical reactor PMI issues, compatible with sufficient current drive efficiency for non-inductive steady-state core scenarios. A conceptual design is developed for Vulcan, a compact steady-state deuterium main-ion tokamak which implements the P / S scaling rules. A zero-dimensional core analysis is used to determine R = 1.2 m, with a conventional reactor aspect ratio R / a = 4.0, as the minimum feasible size for Vulcan. Scoping studies of innovative fusion technologies to support the Vulcan PMI mission were carried out for three critical areas: a high-temperature, helium-cooled vacuum vessel and divertor design; a demountable superconducting toroidal field magnet system; and a steady-state lower hybrid current drive system utilizing a high-field-side launch position.

The steady-state current drive system for the Vulcan tokamak concept has been designed, taking into account requirements of high field, small size, and high operational wall temperature (B0 = 7 T, R0 = 1.2 m, Twall > 800 K). This lower hybrid current drive system allows steady-state operation by utilizing high field side launch, high RF source frequency (8 GHz), and dedicated current drive ports. An iterative MHD and current drive solver is used to determine the ideal launching spectra and location to assure strong single pass absorption. It is found that with nominal Vulcan operational parameters (ne ≈ 4 × 1020 m−3, Te ≈ 2.8 keV, Ip = 1.7 MA, PLHCD = 19.8 MW) bootstrap currents of ∼70% and lower hybrid current drive efficiencies of 1.16 × 1019 A W m−2 could be achieved. The optimized solution yielded advanced tokamak profiles with q values on-axis above 2. A conceptual design of the system is presented, which takes into account space, power, cooling, and launched spectrum requirements. The system is found to be compatible with the vacuum vessel design and requires cooling power of

Dimensionless parameter scaling techniques are a powerful tool in the study of complex physical systems, especially in tokamak fusion experiments where the cost of full-size devices is high. It is proposed that dimensionless similarity be used to study in a small-scale device the coupled issues of the scrape-off layer (SOL) plasma, plasma–material interactions (PMI), and the plasma-facing material (PFM) response expected in a tokamak fusion reactor. Complete similarity is not possible in a reduced-size device. In addition, “hard” technological limits on the achievable magnetic field and peak heat flux, as well as the necessity to produce non-inductive scenarios, must be taken into account. A practical approach is advocated, in which the most important dimensionless parameters are matched to a reactor in the reduced-size device, while relaxing those parameters which are far from a threshold in behavior. “Hard” technological limits are avoided, so that the reduced-size device is technologically feasible. A criticism on these grounds is offered of the “P/R” model, in which the ratio of power crossing the last closed flux surface (LCFS), P, to the device major radius, R, is held constant. A new set of scaling rules, referred to as the “P/S” scaling (where S is the LCFS area) or the “PMI” scaling, is proposed: (i) non-inductive, steady-state operation; (ii) P is scaled with R2 so that LCFS areal power flux P/S is constant; (iii) magnetic field B constant; (iv) geometry (elongation, safety factor q*, etc.) constant; (v) volume-averaged core density scaled as n ≈ n ¯ e ∼ R − 2 / 7 ; and (vi) ambient wall material temperature TW, 0 constant. It is shown that these scaling rules provide fidelity to reactor conditions in the divertor of the reduced-size device, allowing for reliable extrapolation of the behavior of the coupled SOL/PMI/PFM system from the reduced-size device to a reactor. The P/S scaling is used as the basis for the Vulcan tokamak conceptual design.