Search

This study aimed to analyze the time-course of the physical properties of the psoas major muscle (PM) before and after exercise using magnetic resonance elastography (MRE). Muscle stiffness is one of the important properties associated with muscle function. However, there was no research on the stiffness of the PM after exercise. In this study, we investigated time-course changes of the shear modulus of the PM after exercise. Furthermore, T2 values and apparent diffusion coefficient (ADC), as the additional information associated with muscular physical properties, were also measured simultaneously. Healthy young male volunteers were recruited in this study (n = 9) and they were required to perform a hand-to-knee isometric and unilateral exercise (left side). At each time-point before and after exercise, a set of 3 types of MR scans to measure multiple physical properties of the PM [shear modulus (MRE), T2 values, and ADC] were repeatedly taken. On day 1, a single set MR scan was taken before exercise (pre-exercise MR scan), and 6 sets MR scans were taken (5.5 to 38.0 min after exercise). After about 10-min rest (46.0 to 56.0 min after exercise), 4 sets MR scans were taken (57.5 to 77.0 min after exercise). About 10-min rest was taken again (85.0-95.0 min after exercise), 4 sets MR scans were taken (96.5 to 116.0 min after exercise). On days 2 and 7, a single set MR scan (MRE, T2 value, and ADC) was taken on each experimental day. The data were analyzed as relative changes (%) of the given parameters to the pre-exercise values. The results indicated significant decreases in PM shear modulus up to about 30 min after exercise. Then, it gradually increased and showed significant increases at about 100 min after exercise compared to that before exercise. T2 values and ADC showed significant increases up to about 65 min after exercise compared to those before exercise, and then returned to the pre-exercise values. On days 2 and 7, all values showed no significant changes compared to the pre-exercise values. This study is the first to report the time-course of the physical properties of the PM after exercise.

The purpose of this study was to determine an optimal condition (vibration frequency and image filtering) for stiffness estimation with high accuracy and stiffness measurement with high repeatability in magnetic resonance elastography (MRE) of the supraspinatus muscle. Nine healthy volunteers underwent two MRE exams separated by at least a 30 min break, on the same day. MRE acquisitions were performed with a gradient-echo type multi-echo MR sequence at 75, 100, and 125 Hz pneumatic vibration. Wave images were processed by a bandpass filter or filter combining bandpass and directional filters (bandpass-directional filter). An observer specified the region of interest (ROI) on clear wave propagation in the supraspinatus muscle, within which the observer measured the stiffness. This study assessed wave image quality according to two indices, as a substitute for the assessment of the accuracy of the stiffness estimation. One is the size of the clear wave propagation area (ROI size used to measure the stiffness) and the other is the qualitative stiffness resolution score in that area. These measurements made by the observer were repeated twice at least one month apart after each MRE exam. This study assessed the intra-examiner and observer repeatability of the stiffness value, ROI size and resolution score in each combination of vibration frequency and image filter. Repeatability of the data was analyzed using the intraclass correlation coefficient (ICC) and 95% limits-of-agreement (LOA) in Bland-Altman analysis. The analyses on intra-examiner and observer repeatability of stiffness indicated that the ICC and 95% LOA were not varied greatly depending on vibration frequency and image filter (intra-examiner repeatability, ICC range, 0.79 to 0.88; 95% LOA range, ±23.95 to ±32.42%, intra-observer repeatability, ICC range, 0.98 to 1.00; 95% LOA range, ±5.10 to ±10.99%). In the analyses on intra-examiner repeatability of ROI size, ICCs were rather low (ranging from: 0.03 to 0.69) while 95% LOA was large in all the combinations of vibration frequency and image filter (ranging from: ±62.66 to ±83.33%). In the analyses on intra-observer repeatability of ROI size, ICCs were sufficiently high in the total combination of vibration frequency and image filter (ranging from 0.80 to 0.87) while the 95% LOAs were better (lower) in the bandpass-directional filter than the bandpass filter (bandpass directional filter vs. bandpass filter, ±28.81 vs. ±54.83% at 75 Hz; ±25.63 vs. ±37.83% at 100 Hz; ±34.51 vs. ±43.36% at 125 Hz). In the analyses on intra-examiner and observer repeatability of resolution score, the mean difference (bias) between the two exams (or observations) was significantly low and there was almost no difference across all the combinations of vibration frequency and image filter (range of bias: −0.11–0.11 and −0.17–0.00, respectively). Additionally, effects of vibration frequency and image filter on wave image quality (ROI size and resolution score) were assessed separately in each exam. Both mean ROI size and resolution score in the bandpass-directional filter were larger than those in the bandpass filter. Among the data in the bandpass-directional filter, mean ROI size was larger at 75 and 100 Hz, and mean resolution score was larger at 100 and 125 Hz. Taking into consideration with the results of repeatability and wave image quality, the present results suggest that optimal vibration frequency and image filter for MRE of the supraspinatus muscles is 100 Hz and bandpass-directional filter, respectively.

The present study aimed to develop vibration techniques for magnetic resonance (MR) elastography (MRE) of the psoas major muscle (PM). Seven healthy volunteers were included. MRE was performed with motion-encoding gradient (MEG)-less multi-echo MRE sequence, which allows clinicians to perform MRE using conventional MR imaging. In order to transmit mechanical vibration of the pneumatic type to the PM, a long narrow vibration pad was designed using a 3D printer, and the optimum vibration techniques were verified. The vibration pad was placed under the lower back, with the volunteers in the supine position. The results indicated that the PM vibrated well through the transmitted vibration from the lumbar spine, which suggests that the placement of a narrow vibration pad under the supine body, along the lumbar spine, allows the vibration of the PM. The shear modulus of the PM (n = 7) was 1.23 ± 0.09 kPa (mean ± SEM) on the right side and 1.22 ± 0.15 kPa on the left side, with no significant difference (t-test, P > 0.05). Increased stiffness of the muscle due to continuous local contraction may be an important cause of non-specific low back pain (LBP). The present vibration techniques for MRE of the PM provide a quantitative diagnostic tool for changes in muscle stiffness associated with non-specific LBP.

We report star-trail artifacts of advanced-putrefied brain on postmortem CT (PMCT) of a 77-year-old male approximately one month after death. After CT calibration, routine PMCT (tube current time product: 400 mAs) showed star-trail artifacts, which arose due to cerebral cavitation, but were hardly visible on low-dose PMCT (100 mAs) due to noise. Low-dose PMCT with 4-time-image summation also showed star-trail artifacts. Those are not due to mechanical X-ray detector problems.

Magnetic resonance elastography (MRE) can measure tissue stiffness quantitatively and noninvasively. Supraspinatus muscle injury is a significant problem among throwing athletes. The purpose of this study was to develop an MRE technique for application to the supraspinatus muscle by using a conventional magnetic resonance imaging (MRI). MRE acquisitions were performed with a gradient-echo type multi-echo MR sequence at 100 Hz pneumatic vibration. A custom-designed vibration pad was used as a pneumatic transducer in order to adapt to individual shoulder shapes. In a gradient-echo type multi-echo MR sequence, without motion encoding gradient (MEG) that synchronizes with vibrations, bipolar readout gradient lobes achieved a similar function to MEG (MEG-like effect). In other words, a dedicated MRE sequence (built-in MEG) is not always necessary for MRE. In this study, 7 healthy volunteers underwent MRE. We investigated the effects of direction of the MEG-like effect and selected imaging planes on the patterns of wave propagation (wave image). The results indicated that wave images showed clear wave propagation on a condition that the direction of the MEG-like effect was nearly perpendicular to the long axis of the supraspinatus muscle, and that the imaging plane was superior to the proximal supraspinatus muscle. This limited condition might be ascribed to specific features of fibers in the supraspinatus muscle and wave reflection from the boundaries of the supraspinous fossa. The mean stiffness of the supraspinatus muscle was 10.6 ± 3.17 kPa. Our results demonstrated that using MRE, our method can be applied to the supraspinatus muscle by using conventional MRI.

We measured standard deviation (SD), noise power spectrum (NPS), and modulation transfer function (MTF) of computed tomography obtained by image summation method (fused CT) using phantoms. SDs, NPSs and MTFs of fused CT up to 25 times summation were calculated. Increased number of image summation reduced SD and NPS, although the effect became small after 10 times summation. MTF remained the same regardless of the number of summation. Fused CT is effective in reducing noise.

To demonstrate the feasibility of a novel MR elastography (MRE) technique based on a conventional gradient-echo type multi-echo MR sequence which does not need additional bipolar magnetic field gradients (motion encoding gradient: MEG), yet is sensitive to vibration. In a gradient-echo type multi-echo MR sequence, several images are produced from each echo of the train with different echo times (TEs). If these echoes are synchronized with the vibration, each readout's gradient lobes achieve a MEG-like effect, and the later generated echo causes a greater MEG-like effect. The sequence was tested for the tissue-mimicking agarose gel phantoms and the psoas major muscles of healthy volunteers. It was confirmed that the readout gradient lobes caused an MEG-like effect and the later TE images had higher sensitivity to vibrations. The magnitude image of later generated echo suffered the T2 decay and the susceptibility artifacts, but the wave image and elastogram of later generated echo were unaffected by these effects. In in vivo experiments, this method was able to measure the mean shear modulus of the psoas major muscle. From the results of phantom experiments and volunteer studies, it was shown that this method has clinical application potential.

Objective Using an anthropomorphic phantom, we have investigated the feasibility of digital tomosynthesis (DT) of flat-panel detector (FPD) radiography to reduce radiation dose for sinonasal examination compared to multi-detector computed tomography (MDCT). Materials and methods A female Rando phantom was scanned covering frontal to maxillary sinus using the clinically routine protocol by both 64-detector CT (120 kV, 200 mA s, and 1.375-pitch) and DT radiography (80 kV, 1.0 mA s per projection, 60 projections, 40° sweep, and posterior–anterior projections). Glass dosimeters were used to measure the radiation dose to internal organs including the thyroid gland, brain, submandibular gland, and the surface dose at various sites including the eyes during those scans. We compared the radiation dose to those anatomies between both modalities. Results In DT radiography, the doses of the thyroid gland, brain, submandibular gland, skin, and eyes were 230 ± 90 μGy, 1770 ± 560 μGy, 1400 ± 80 μGy, 1160 ± 2100 μGy, and 112 ± 6 μGy, respectively. These doses were reduced to approximately 1/5, 1/8, 1/12, 1/17, and 1/290 of the respective MDCT dose. Conclusion For sinonasal examinations, DT radiography enables dramatic reduction in radiation exposure and dose to the head and neck region, particularly to the lens of the eye.

Magnetic resonance elastography (MRE) is designed for imaging the mechanical properties of soft tissues. However, the interpretation of shear modulus distribution is often confusing and cumbersome. For reliable evaluation, a common practice is to specify the regions of interest and consider regional elasticity. Such an experience-dependent protocol is susceptible to intrapersonal and interpersonal variability. In this study we propose to remodel shear modulus distribution with piecewise constant level sets by referring to the corresponding magnitude image. Optimal segmentation and registration are achieved by a new hybrid level set model comprised of alternating global and local region competitions. Experimental results on the simulated MRE data sets show that the mean error of elasticity reconstruction is 11.33% for local frequency estimation and 18.87% for algebraic inversion of differential equation. Piecewise constant level set modeling is effective to improve the quality of shear modulus distribution, and facilitates MRE analysis and interpretation.

Background 18q-Syndrome is a chromosomal disorder exhibiting various symptoms arising from the central nervous system. Brain magnetic resonance imaging (MRI) of patients with this syndrome usually demonstrates abnormal white matter intensities. This is widely believed to be due to impaired myelin formation because this syndrome involves the deletion of the myelin basic protein (MBP) gene in 18q23. However, this hypothesis has not been confirmed by actual pathology because early death is unusual and autopsy rarely performed. Patient A 6-year-old boy with ring chromosome 18 syndrome was examined by genetic analysis for the MBP gene, brain MRI, and autopsy. Results Haploinsufficiency of the MBP gene was confirmed. T2-weighted MRI revealed diffuse high intensities throughout the cerebral white matter. Pathological examination showed the cerebral white matter to be uniformly stained by Kluver–Barrera and MBP immunohistochemical staining. Oligodendrocytes were immunoreactive for proteolipid protein and ferritin but not MBP. Electron microscopy revealed clusters of axons wrapped in compact myelin sheaths with distinct major dense lines. Holzer and immunohistochemical staining for glial fibrillary acidic protein showed extensive staining of the white matter and an increased number of glial filaments. Conclusions This pathological study demonstrated that in this disorder, the brain was well myelinated, contrary to established hypotheses about this disorder. The MRI signal abnormalities in 18q-syndrome could be attributed to gliosis and not to dysmyelination.

The advantages of three-dimensional (3D) acquisition are that you obtain thinner and more slices with better profiles, and better signal-to-noise ratio for an equivalent slice thickness. Three-dimensional acquisition is preferable for obtaining contiguous thin-slice MR images. However, the acquisition time extends compared with the two-dimensional acquisition because the second phase-encode axis is applied by the 3D acquisition. Therefore, 3D acquisition should be a high-speed imaging method. In this paper, a new diffusion-sensitive 3D magnetization-prepared rapid gradient-echo (3D MP-RAGE) sequence was studied. In this sequence, a preparation phase with a 90 degrees RF-motion proving gradient (MPG): MPG-180 degrees RF-MPG-90 degrees RF pulse train (diffusion-weighted driven-equilibrium Fourier transform) was used to sensitize the magnetization to diffusion. Centric k-space acquisition order is necessary to minimize saturation effects from tissues with short relaxation times. From phantom experimental results, the effect of the diffusion weighting was changed by the centric vs. sequential k-space acquisition order. The effect of centric k-space acquisition order was larger than the effect of sequential k-space acquisition order. The contrast of centric k-space acquisition order became equal to the contrast of conventional diffusion-weighted spin echo. From rat experimental results, small isotropic diffusion-weighted image data (voxel size: 0.625 x 0.625 x 0.625 mm3) were obtained. This sequence was useful in vivo.