Search

A time-independent finite difference method is developed to simulate fluid sloshing in a three-dimensional tank. The developed numerical scheme is verified by the rigorous benchmark tests. The experiment measurement of liquid sloshing in a 3D tank was also carried out in this study to further validate the accuracy of the present numerical results. Transient waves can change their types naturally in the time domain, especially for a tank excited by resonant frequencies. In this study, if the excitation frequencies are far from the fundamental natural frequency and there are four types of stable sloshing waves discovered due to the oblique horizontal excitation: “diagonal”, “single-directional”, “square-like”, and “irregular” waves. Besides, the swirling waves can only be generated for a partially-filled tank excited at near resonant frequency with oblique horizontal excitation. The evolution of forces induced by different sloshing waves acting on the tank walls is calculated and discussed in this work. In addition, the dynamics of sloshing force induced by swirling waves are explored in detail. The force of the single-directional waves acting on the tank bottom is time-invariant but the other types of sloshing waves show a beating phenomenon which is attributed to the momentum flux across the free surface and the vertical inertia of sloshing fluid. The effect of various oblique excitation directions of the tank on liquid sloshing is discussed as well. The horizontal hydrodynamic force of sloshing waves acting on the mid-section of the left wall of the tank is dominated by the added mass effect if the external excitation frequency is larger than 4 times the lowest natural frequency ( ω 1 ) of the tank with partially-filled fluid. On the other hand, the wave elevation of sloshing waves plays a key effect on the horizontal sloshing-induced force when the excitation frequency of the tank is less than 4 ω 1 . A novel mechanism is presented to describe the phenomenon of alternate switch directions of the swirling waves. The relationship between the external force and the sloshing hydrodynamic force is the major factor to trigger the switch direction of the swirling waves. The influence of different base ratios of a rectangular tank on kinematic and dynamic responses of sloshing fluid is also explored in this work.

Giant fusiform aneurysms are rare vascular anomalies that due to their size are often difficult to manage. We describe one such aneurysm that was managed with a superficial temporal to middle cerebral artery bypass followed by the application of a single clip just distal to the vascular dilation. Follow-up angiography has shown aneurysm obliteration by the process of retrograde thrombosis.

The solution for finite deformations of a solid viscoelastic cylinder subjected to extension and torsion is presented. An experiment is performed on a latex rubber cylinder. Both axial load and torque histories of the deformed cylinder are recorded. The theoretical coupling relationship between torsion and extension is verified. With the theoretical and experimental results, the viscoelastic properties of the cylinder can be obtained.

The force/deformation relationship of the exposed spinal cord of cats was studied when the force was gradually applied posteriorly at T10. A linear elastic behavior was identified for deformation less than 0.5 mm, but it was not observed when the static force was no longer supported by the dural sheath. Nonlinear force/deformation, along with a strong hysteresis during a cycle of compression and decompression. The mechanical behavior remained practically the same in a repeated loading if the deformation was less than 2 mm. The motor function of cats did not recover after the cord had been compressed to 4 mm. The associated static force was about 15% of the dynamic force producing the same deformation.

An in vivo experimental method was developed to measure the mechanical or rheological properties of the spinal cord of anesthetized cats. This novel approach resulted in the measurements of the tensile force in the cord and the modulus of the spinal cord tissue under longitudinal elongation.

An in vivo experimental method was developed to measure the mechanical or rheological properties of the spinal cord of anesthetized cats. This novel approach resulted in measurements of the tensile force in the cord and the modulus of the spinal cord tissue under longitudinal elongation. Both sensory and motor function of the cats recovered within a week after a spinal cord segment had been stretched by a 50% elongation.

This article summarizes the biomechanical relationship of the spinal column to load stresses with respect to column failure, and the resulting associated central nervous system injury. In addition, it presents pertinent animal research, which has focused onto the development standardized animal spinal cord injury model.

A study was undertaken to investigate the applicability of the arteriovenous mode of perfusion for partial support of neonatal respiration. Perigestational lambs, delivered by cesarean section, served as the animal model of respiratory distress. Arteriovenous flow was accomplished between a single umbilical artery and vein. A microchannel membrane oxygenator was used to provide partial respiratory support to the newborn lambs. Total systemic flow, pulmonary blood flow, and pulmonary vascular resistance were assessed at various rates of arteriovenous perfusion and correlated with systemic oxygenation. A reduction in right-to-left shunting of blood and pulmonary vascular resistance occurred as arterial oxygenation rose from conditions of hypoxemia to PaO2 values higher than 50 torr. Myocardial performance was not impaired at rates of arteriovenous perfusion below 30 percent of the total systemic flow, as evidenced by normal electrocardiographic tracings, pulmonary capillary wedge pressures, and central venous pressures. Arteriovenous extracorporeal membrane oxgenation (ECMO) may be particularly suitable for use in infants with hypoxia and high pulmonary vascular resistance.

is Assistant Professor of Neurological Surgery, University of Pittsburgh, He received his basic neurosurgery training at Case Western Reserve Hospital and completed a year Fellowship in Microsurgery at the University of Pittsburgh. Dr. Yonas's research areas mainly are centered on problems of cerebral ischemia; for that study he has developed a new primate stroke model. His special interests in problems of spasticity developed during his fellowship at the University of Pittsburgh, and continues to the present.

Orthogonal curvilinear mesh networks are generated numerically between the wavy walls of two-dimensional peristaltic channels. A dual iterative procedure is developed to facilitate the conformal mapping, as well as to adjust mesh dimensions when necessary to fit the boundaries of the flow region. An implicit finite-difference technique is employed to obtain transient solutions of the Navier-Stokes equations. The effects of initial conditions on the flow establishment are discussed, along with considerations of numerical accuracy. The effects of certain nonconservative difference forms of the governing equations are explored. A calculated velocity field for a two-dimensional nonlinear peristaltic flow is supported by laboratory flow observation. The present method is applicable for laminar flow in a nonuniform channel with or without wall peristalsis.