Search

X-ray photoelectron spectroscopy (XPS) is among the most utilized analytical methods for nitrogen-doped carbon materials. Clarifying the assignments of nitrogen-doped carbon materials with different degrees of carbonization, which relates to conjugated systems, is essential to correlate structures with the performance of various applications, but such precise assignments were challenging. In this work, precise analyses were conducted to overcome the difficulty to assign the peaks of carbon materials with different degrees of carbonization, different edges, and various nitrogen-containing functional groups in graphene nanoribbons (GNRs), such as nitrile, pyridinic, primary with/without charges, secondary with/without charge, tertiary without charges (graphitic nitrogen), and quaternary nitrogen. Electrons donated from hydrogen and Madelung potentials showed a higher correlation to the peak shift of C1s and N1s XPS spectra than Mulliken charges on nitrogen. Zigzag edges showed a greater influence on the peak shift of tertiary amine (graphitic nitrogen) than armchair edges on XPS spectra. Besides, as the degree of carbonization is increased from aromatic compound-like structures to GNRs, the peak positions of C–N in C1s and N1s XPS spectra shifted to higher binding energies. This research proved that XPS could be applied to the precise structural analyses of nitrogen-containing carbon materials.

Isotropic pitch-based carbon fiber has been utilized for various applications such as thermal insulation materials for high-temperature furnace and additives for slide member, but the structure of the carbon fiber is still under debate. This is because the precursor pitch contains various aromatic compounds in addition to the complicated oxidation and carbonization reaction during production process of carbon fiber. In this work, oxidation processes of model compounds of pitch such as pyrene (sp2C H with zigzag-like edges), triphenylene (sp2C H with armchair edges), fluorene (pentagon with sp3CH2), and 9-methylanthracene (hexagon with sp3CH3) were analyzed using mass spectrometry, elemental analysis, infrared (IR), Raman, and X-ray photoelectron spectroscopy (XPS) in addition to calculation such as molecular dynamic simulation with a reactive force field (ReaxFF) and simulation of IR, Raman, and XPS spectra (Gaussian09). Combination of calculations and experiments revealed that oxidation proceeded in the order of zigzag-like edges > sp3CH3 > sp2CH2 > armchair edges, and the quinone formed by oxidation worked as a precursor for a crosslinking reaction. It is expected that the results of this work, which revealed the origin of the crosslinking, could lead to improve properties as well as to estimate the detailed structures of isotropic pitch-based carbon fiber.

Edges of carbon materials have been known to work as active sites for various applications such as catalysts, adsorbent, and electrodes, but selecting precursors for carbon materials with controlled edges in the absence of metallic substrate is challenging. This work developed a method to select the superior precursors instantaneously using molecular dynamic simulation. This simulation predicted that hydrogen in precursors gasified and the hydrogen attacked the active sites in precursors upon carbonization, causing the decrement of active sites. Thus, it is essential to reduce the concentration of hydrogen in precursors and it is also necessary to introduce reactive functional groups near the active site to protect the active sites. We indeed synthesized the selected precursors such as diethynyl anthracene, diethynyl chrysene, divinyl naphthyridine, and divinyl phenanthroline and proved that edges in those precursors were maintained even after carbonization at 773 K using diffuse reflectance infrared Fourier transform and X-ray photoelectron spectroscopy with the aid of spectra simulated by density functional theory calculation. Especially, ca. 100% of edge structures of zigzag edges and armchair edges in diethynyl anthracene and diethynyl chrysene was maintained even after carbonization at 773 K.

Vapor-phase catalytic dehydration of 2,3-butanediol (2,3-BDO) to produce 3-buten-2-ol (3B2OL) was investigated over several monoclinic ZrO 2 (m-ZrO 2 ) catalysts modified with alkaline earth metal oxides (MOs), such as SrO, BaO, and MgO, to compare with the previously reported CaO/m-ZrO 2 . It was found that these modifiers enhanced the 3B2OL formation to the same level as CaO did by loading an appropriate MO content. Among all the tested catalysts, the BaO/m-ZrO 2 calcined at 800 °C with a low BaO content (molar ratio of BaO/ZrO 2 = 0.0452) shows the highest 2,3-BDO conversion (72.4%) and 3B2OL selectivity (74.4%) in the initial stage of 5 h at 350 °C. In order to characterize those catalysts, their catalytic activities, crystal structures, and basic properties were studied in detail. In X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) experiment, it was elucidated that highly dispersed M-O-Zr (M = Ca, Sr, and Ba) hetero-linkages were formed on the surface by loading these MOs onto m-ZrO 2 with an appropriate content and then calcining at 800 °C. It can be concluded that the M-O-Zr hetero-linkages generate the proper base-acid balance for the efficient formation of 3B2OL from 2,3-BDO.

Nitrogen-doped carbon materials such as graphene and activated carbon have been studied as solid base catalysts. However, active sites of carbon catalysts have long been ambiguous because of the presence of various functional groups. This work clarified the dependence of positions of nitrogen atoms in aromatic hydrocarbons on catalytic activities of well-known Knoevenagel condensation of benzaldehyde with ethyl cyanoacetate to produce ethyl cyanocinnamate (ECC) as one of the examples for catalytic reactions. Catalytic activities of 30 kinds of aromatic hydrocarbons composed of one, two, and three aromatic rings with zero, one, two, and three nitrogen atoms were compared. Phenazine with zigzag edges and pyridinium ion with quaternary nitrogen showed low catalytic activities. On the other hand, 1,10-phenanthroline with armchair edges showed a high ECC selectivity of 99.3% and a high ECC yield of 59.0%. Among various aromatic hydrocarbons carbonized on silica, 1,10-phenanthroline carbonized at 923 K exhibited the highest ECC selectivity of 89.5% and the highest ECC yield of 10.2% because of the highest percentage of 1,10-phenanthroline-like N after carbonization. We believe that this work can serve as a perfect example to examine the performance of carbon catalysts at a molecular level in the future.