70 results on '"Lapuerta, Magín"'
Search Results
2. Relationships between morphology and optical properties of vehicle-emitted soot
3. Hydrogenated terpenic renewable fuels: Emissions and combustion analysis
4. Emissions from a Euro 6 engine using polyoxymethylene dimethyl ethers: Chemical effects vs mapping strategy
5. Environmental and health risk implications of unregulated emissions from advanced biofuels in a Euro 6 engine
6. Autoignition of ethanol-diesel blends: Is it worth dehydrating ethanol?
7. Surface tension of diesel-alcohol blends: Selection among fundamental and empirical models
8. Hydrogenated orange oil: A waste derived drop-in biojet fuel
9. Comparison of equations used to estimate soot agglomerate absorption efficiency with the Rayleigh-Debye-Gans approximation
10. Oxyfunctionalized turpentine: Evaluation of properties as automotive fuel
11. Reconsideration of regulated contamination limits to improve filterability of biodiesel and blends with diesel fuels
12. Determination of optical and dielectric properties of blends of alcohol with diesel and biodiesel fuels from terahertz spectroscopy
13. Impact of oxyfunctionalized turpentine on emissions from a Euro 6 diesel engine
14. Soot reactivity analysis and implications on diesel filter regeneration
15. Optical determination of black carbon mass concentrations in snow samples: A new analytical method
16. Autoignition reactivity of blends of diesel and biodiesel fuels with butanol isomers
17. Improvement of cold flow properties of a new biofuel derived from glycerol
18. Fatty acid ethyl esters (FAEEs) obtained from grapeseed oil: A fully renewable biofuel
19. Characterization of biomass PM emissions using thermophoretic sampling: Composition and morphological description of the carbonaceous residues
20. Cold flow and filterability properties of n-butanol and ethanol blends with diesel and biodiesel fuels
21. Cold- and warm-temperature emissions assessment of n-butanol blends in a Euro 6 vehicle
22. Reduction of snow albedo from vehicle emissions at Portillo, Chile
23. Biomass quality control in power plants: Technical and economical implications
24. Interaction of diesel engine soot with NO2 and O2 at diesel exhaust conditions. Effect of fuel and engine operation mode
25. Morphological analysis of soot agglomerates from biodiesel surrogates in a coflow burner
26. Modeling viscosity of butanol and ethanol blends with diesel and biodiesel fuels
27. Polycyclic Aromatic Hydrocarbons (PAHs) produced in the combustion of fatty acid alkyl esters from different feedstocks: Quantification, statistical analysis and mechanisms of formation
28. Regeneration of diesel particulate filters: Effect of renewable fuels
29. Overestimation of the fractal dimension from projections of soot agglomerates
30. Comparison of multiple diagnostic techniques to study soot formation and morphology in a diffusion flame
31. Structural effects of biodiesel on soot formation in a laminar coflow diffusion flame
32. Autoignition of blends of n -butanol and ethanol with diesel or biodiesel fuels in a constant-volume combustion chamber
33. Characterisation of residual char from biomass gasification: effect of the gasifier operating conditions
34. Effect of fatty acid composition of methyl and ethyl esters on the lubricity at different humidities
35. Modelling of evaporative losses in n-alcohol/diesel fuel blends
36. Effects of methyl substitution on the auto-ignition of C16 alkanes
37. Separate effect of H2, CH4 and CO on diesel engine performance and emissions under partial diesel fuel replacement
38. Evaluation of eleven genotypes of castor oil plant ( Ricinus communis L.) for the production of biodiesel
39. Effect of a glycerol-derived advanced biofuel –FAGE (fatty acid formal glycerol ester)– on the emissions of a diesel engine tested under the New European Driving Cycle
40. Desulfurization of pyrolysis fuels obtained from waste: Lube oils, tires and plastics
41. Properties of fatty acid glycerol formal ester (FAGE) for use as a component in blends for diesel engines
42. Impact of branched structures on cycloalkane ignition in a motored engine: Detailed product and conformational analyses
43. Pellet blends of poplar and pine sawdust: Effects of material composition, additive, moisture content and compression die on pellet quality
44. Effect of sintering on the fractal prefactor of agglomerates
45. Molecular interactions in blends of alcohols with diesel fuels: Effect on stability and distillation
46. An equation for the estimation of alcohol-air diffusion coefficients for modelling evaporation losses in fuel systems
47. Properties and emission indicators of biodiesel fuels obtained from waste oils from the Turkish industry
48. Effect of ambient humidity and hygroscopy on the lubricity of diesel fuels
49. Group additivity in soot formation for the example of C-5 oxygenated hydrocarbon fuels
50. Blending scenarios for soybean oil derived biofuels with conventional diesel
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.