63 results on '"González-Carrasco, J.L."'
Search Results
2. Efficacy of laser shock processing of biodegradable Mg and Mg-1Zn alloy on their in vitro corrosion and bacterial response
3. Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications
4. Effect of Mg content on the thermal stability and mechanical behaviour of PLLA/Mg composites processed by hot extrusion
5. Assessment of mechanical behavior of PLA composites reinforced with Mg micro-particles through depth-sensing indentations analysis
6. Repetitive nano-impact tests as a new tool to measure fracture toughness in brittle materials
7. On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening
8. In vitro corrosion behaviour of surgical 316LVM stainless steel modified by Si+ ion implantation – An electrochemical impedance spectroscopy study
9. Nanomechanical characterization of alumina coatings grown on FeCrAl alloy by thermal oxidation
10. In vitro degradation of biodegradable polylactic acid/magnesium composites: Relevance of Mg particle shape
11. Thermal oxidation of medical Ti6Al4V blasted with ceramic particles: Effects on the microstructure, residual stresses and mechanical properties
12. Dynamic nanomechanical properties of novel Si-rich intermetallic coatings growth on a medical 316 LVM steel by hot dipping in a hypereutectic Al–25Si alloy
13. Effects of bath composition and processing conditions on the microstructure and mechanical properties of coatings developed on 316 LVM by hot dipping in melted AlSi alloys
14. Strain rate effect on semi-crystalline PLLA mechanical properties measured by instrumented indentation tests
15. Fatigue behavior of Ti6Al4V and 316 LVM blasted with ceramic particles of interest for medical devices
16. Oxidation behavior of AISI 316 steel coated by hot dipping in an Al–Si alloy
17. Significance of the contacting and no contacting thermoelectric power measurements applied to grit blasted medical Ti6Al4V
18. A method to assess the fracture toughness of intermetallic coatings by ultramicroindentation techniques: Applicability to coated medical stainless steel
19. Characterization of the elastic–plastic behavior of intermetallic coatings growth on medical stainless steel by instrumented ultramicroindentation
20. Novel PLLA/magnesium composite for orthopedic applications: A proof of concept
21. Assessment of blasting induced effects on medical 316 LVM stainless steel by contacting and non-contacting thermoelectric power techniques
22. Bacterial adhesion reduction on a biocompatible Si+ ion implanted austenitic stainless steel
23. On the role of RhoA/ROCK signaling in contact guidance of bone-forming cells on anisotropic Ti6Al4V surfaces
24. Roughening of metallic biomaterials by abrasiveless waterjet peening: Characterization and viability
25. Nanomechanical properties of novel intermetallic coatings developed on austenitic stainless steels by siliconisation in liquid phase
26. Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties
27. Novel approaches to determining residual stresses by ultramicroindentation techniques: Application to sandblasted austenitic stainless steel
28. Influence of slight microstructural gradients on the surface properties of Ti6Al4V irradiated by UV
29. On the delamination of FeCrAl ODS alloys
30. Development of hard intermetallic coatings on austenitic stainless steel by hot dipping in an Al–Si alloy
31. Influence of the sandblasting on the subsurface microstructure of 316LVM stainless steel: Implications on the magnetic and mechanical properties
32. Interrogations on the sub-surface strain hardening of grit blasted Ti–6Al–4V alloy
33. Phase separation in PM 2000™ Fe-base ODS alloy: Experimental study at the atomic level
34. Effect of UV irradiation on the surface Gibbs energy of Ti6Al4V and thermally oxidized Ti6Al4V
35. Assessment of factors influencing surface recrystallisation during high temperature exposure of fine-grained PM 2000 alloy
36. Looking at the micro-topography of polished and blasted Ti-based biomaterials using atomic force microscopy and contact angle goniometry
37. Application of thermal oxidation to the development of PM 2000 as potential biomaterial for medical devices
38. Oxidation behaviour of novel ODS FeAlCr intermetallic alloys
39. Evaluation of mechanical properties and biological response of an alumina-forming Ni-free ferritic alloy
40. Quantitative assessment of the response of osteoblast- and macrophage-like cells to particles of Ni-free Fe-base alloys
41. On the differences of the 475 °C age hardening between as-hot rolled and recrystallised MA956 alloy
42. Oxidation behaviour of yttria dispersion strengthened Fe40Al alloy foils
43. Influence of the yttria content on the oxidation behaviour of the intermetallic Fe40Al Alloy
44. In vitro corrosion behaviour and osteoblast response of thermally oxidised Ti6Al4V alloy
45. Effects of polyethylene and α-alumina particles on IL-6 expression and secretion in primary cultures of human osteoblastic cells
46. Influence of the 475°C hardening of MA 956 on its corrosion behaviour at room temperature
47. The influence of grain size and dispersoids on the quench hardening of a mechanically alloyed Fe-40Al intermetallic
48. Oxidation behaviour of Fe40Al alloy strip
49. The high temperature oxidation behaviour of an ODS FeAl alloy
50. Effect of substrate roughness on the corrosion behaviour of the Al2O3/MA 956 system
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.