228 results on '"Fu, Qiangang"'
Search Results
2. Effect of temperature-dependent nano SiC on the ablation resistance of ZrC coating
3. Oxidation Failure Behavior and Repair of the Damaged Sic-Zrb2/Sic Coating of C/C Composites
4. Ablation of advanced C/C-ZrC-SiC leading edge composites
5. One-Step Biomimetic Preparation for Zrc-Sic Modified C/C Composites with Gradient Structure by Reactive Melt Infiltration
6. Insights into service-derived Zr-Ta-O film: Morphology evolution, temperature resistance, and atomic bonding
7. Ultra-Long Al Doped Core-Shell Nanowires: Relationship between Structural Defect And Optical Property
8. WSi2 modified HfB2-SiC coating: Microstructure and ablation resistance
9. Improving repair performance for damaged C/C composites via heat-treatment temperature optimization and surface pretreatment
10. Corrosion behavior of Al2O3-modified Yb2SiO5 environmental barrier coating under water vapor conditions at 1500oC
11. Effects of air plasma flame on the ZrB2-based UHTC coatings: Microstructure, phase evolution and ablation resistance
12. Ablation behaviour of C/C-HfC-SiC composites prepared by joint route of precursor infiltration and pyrolysis and gaseous silicon infiltration
13. Ultrahigh thermal conductive graphite film via the in-situ construction of aligned nanographene skeleton using chemical vapor deposition
14. Laser ablation mechanism of ZrC-SiC-MoSi2 ternary ceramic modified C/C
15. Recovery in oxidation behavior of damaged SiC ZrB2/SiC coating of carbon/carbon composites
16. Ultra-high temperature performance of carbon fiber composite reinforced by HfC nanowires: A promising lightweight composites for aerospace engineering
17. Relationship analyses on environmental factors-ablation performance based on ZrC-TaC system: Oxygen partial pressure and gas flow scouring
18. Reactive Melt Infiltration Fabrication of Leading-Edge Shaped C/C-Zrc-Sic Composites: Improved Mechanical and Ablation Properties with a Tailored Sic-C Interphase
19. Enhanced Toughness-Thermal Stability Synergy and Mechanisms of Dual-Phase Nb Alloys by Tuning C Concentrationcover Letter
20. Comparative study of microstructure and ablation behaviour of C/C-HfC-SiC composites prepared under two different conditions
21. Two birds with one stone: Simultaneous fabrication of HfC nanowires and CNTs through efficient utilization of polymer-derived ceramics
22. Mechanical strengthening and recovery of C/C-Mo joints during thermal cycling
23. Effect of SiCnws@BN core shell upon impact-ablation performance of HfC coating on C/C composites
24. Significant increase in mechanical performance of the C/C-Mo joint by controlling the interfacial defects
25. Improved oxidation protective ability of SHS powder-synthesized ZrB2-MoSi2-SiC-Si coating on carbon/carbon composites
26. One-step preparation and ablation behavior of ZrC-SiC-Si coating for nose-shaped ZrC/C composites with gradient pore structure by vapor silicon infiltration
27. Ablation behavior of sharp leading-edge C/C-ZrC-SiC composites using 3000 °C oxyacetylene torch
28. High-entropy (Hf0.25Zr0.25Ti0.25Cr0.25)B2 ceramic incorporated SiC-Si composite coating to protect C/C composites against ablation above 2400 K
29. The mechanical and repair behavior of damaged carbon/carbon composites
30. Ablation behavior under oxyacetylene torch of ZrC coating modified by SiC/TaC nanocomposites
31. High temperature oxidation and ablation behaviors of HfB2-SiC/SiC coatings for carbon/carbon composites fabricated by dipping-carbonization assisted pack cementation
32. Exploring Hf-Ta-O precipitation upon ablation of Hf-Ta-Si-C coating on C/C composites
33. Visualizations of the carbon interphase influence on the ablated fracture morphology of carbon/carbon composites at pore scale
34. Grain growth limitation in the monolayer ZrB2–SiC coating above 1700 °C
35. Static water vapor corrosion behavior of MoSi2/Mullite composite coating on Nb based alloy at 1500 °C
36. Design of ablation resistant Zr-Ta-O-C composite coating for service above 2400 ℃
37. Multiple cyclic ablation behaviors of multilayer ZrC-TaC coating with ZrC-SiC interface layer
38. Multicomponent (Hf0.25Zr0.25Ti0.25Cr0.25)B2 ceramic modified SiC–Si composite coatings: In-situ synthesis and high-temperature oxidation behavior
39. Discussion on structural parameters of the multilayer ZrC/TaC coatings based on stress analysis and ablation behaviors
40. Experimental and first-principles simulation study on oxidation behavior at 1700 °C of Lu2O3–SiC-HfB2 ternary coating for SiC coated carbon/carbon composites
41. Improved mechanical strength of the C/C-Mo joint by introducing polydopamine modified Ni foam to the interlayer
42. Development of SiC-ZrC-based ultra-high temperature ceramic coatings via composite method of polymer precursor pyrolysis plus gaseous reactive infiltration
43. Micro/nano multiscale reinforcing strategies toward extreme high-temperature applications: Take carbon/carbon composites and their coatings as the examples
44. Mwcnt/Carbon Fabric Multiscale Hybrid Materials for Improving the Mechanical and Tribological Properties of Phenolic Resin Composites
45. Ablation resistant ZrC coating modified by polymer-derived SiC/TiC nanocomposites for ultra-high temperature application
46. Improving the tribological performance of carbon fiber reinforced resin composite by grafting MWCNT and GNPs on fiber surface
47. Ablation Behavior of Zrc Coating Modified by Sic/Tac Nanocomposites Under Oxyacetylene Torch
48. Quasi-static and dynamic compressive behaviors of porous ZrC ceramic reinforced pyrocarbon composites
49. Effects of thermal shock on the microstructure, mechanical and thermophysical properties of ZrC-C composites
50. Effect of TiB2 on the self-crack-healing ability of SiC-Si coating at 1300 °C
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.