Search

The Gamma Beam System of ELI-Nuclear Physics is a high brilliance monochromatic gamma source based on the inverse Compton interaction between an intense high power laser and a bright electron beam with tunable energy. The source, currently being assembled in Magurele (Romania), is designed to provide a beam with tunable average energy ranging from 0.2 to 19.5 MeV, rms energy bandwidth down to 0.5 % and flux of about 1 0 8 photons/s. The system includes a set of detectors for the diagnostic and complete characterization of the gamma beam. To evaluate the spatial distribution of the beam a gamma beam profile imager is required. For this purpose, a detector based on a scintillator target coupled to a CCD camera was designed and a prototype was tested at INFN-Ferrara laboratories. A set of analytical calculations and Monte Carlo simulations were carried out to optimize the imager design and evaluate the performance expected with ELI-NP gamma beam. In this work the design of the imager is described in detail, as well as the simulation tools used and the results obtained. The simulation parameters were tuned and cross-checked with the experimental measurements carried out on the assembled prototype using the beam from an x-ray tube.

The ELI-NP facility, currently being built in Bucharest, Romania, will deliver an intense and almost monochromatic γ beam with tunable energy between 0.2 MeV and 19.5 MeV in two different beamlines. An articulated beam characterization system will be installed downstream of the collimator of each line. The system will use, as calibration candles, a few selected nuclear levels whose fluorescence condition will be monitored by a Nuclear Resonance Scattering System (NRSS). The NRSS will use a peculiar double-readout approach in order to detect resonant events overwhelming background: both scintillation and Cherenkov photons produced inside the same crystals will be separately read.