Search

Abstract: This paper presents an approach for constitutive modeling of the viscoplastic behavior of asphalt mixes. This approach utilizes an anisotropic non-associated flow rule based on the Drucker–Prager yield surface. The selection of this yield surface is motivated by the field stress paths and material properties associated with permanent deformation at high temperatures. The efficacy of the model is demonstrated by analyzing data from compressive triaxial tests conducted at different confining pressures and strain rates for three different mixes. The model parameters are related to the experimental measurements of aggregate shape characteristics, aggregate surface energy, inherent anisotropic distribution of aggregates, and microstructure damage measured using X-ray computed tomography and image analysis techniques. Establishing the relationship between the model parameters and material properties is important in order to optimize the mix properties, and achieve desirable mix performance. [Copyright &y& Elsevier]

Abstract: A microstructure-based viscoplastic continuum model is developed for the permanent deformation of asphalt concrete (AC). The model accounts for several phenomena that influence the permanent deformation of AC at high temperatures. These phenomena include strain rate dependency, confining pressure dependency, dilation, aggregate friction, anisotropy, and damage. The material anisotropy was included in the model by replacing the stress invariants in the yield function with invariants of both the stress and a microstructure tensor, which describes the aggregate orientation distribution. The components of the microstructure tensor were determined using image analysis techniques (IAT) conducted on digital images taken from two-dimensional cut sections of AC. Furthermore, damage was included in the model based on the effective stress theory to account for crack and air void growth that significantly reduces the load-carrying capacity of the material. Experimental data from triaxial compressive strength tests conducted at five strain rates and three confining pressures were used to develop a methodology to determine the material parameters that characterize AC permanent deformation. The model predictions were in a good agreement with the experimental measurements. [Copyright &y& Elsevier]