Search

The integration of large capacities of wind and solar generation into the France and Great Britain (GB) power systems is expected to pose significant operational challenges. Electricity interconnectors can play a role in facilitating the integration of renewable generation in neighbouring countries by allowing power to flow freely between power systems and therefore smooth the net electricity demand. In this paper, role of the electricity interconnectors in efficient balancing of supply and demand in the France and GB power systems was evaluated in terms of overall reduction in the operational costs and curtailment of renewable generation, and also its impact on operation of gas-fired plants. The value of the France-GB interconnectors was studied for two generation mix scenarios in 2030 using PLEXOS. The outputs of the modelling showed the interconnectors will result in larger amount of wind and solar to be absorbed by both power systems which consequently will reduce overall operational costs and CO 2 emissions. In addition, the interconnectors will reduce burden on gas-fired plants compensating for variation in wind and solar generation. This can have a significant value in operation and required investment of gas networks in both countries. [ABSTRACT FROM AUTHOR]

Abstract: An approach for minimisation of the capital costs and energy consumption in a district heating network is presented using a case study based on a district heating network in South Wales, UK. A number of different design cases were simulated using the PSS SINCAL, taking into account different supply and return temperatures and target pressure losses. The operation of the district heating network was synthesised under different design cases using four district heating operating strategies. Optimisation was conducted to obtain the optimal flow rate and supply temperature for the variable flow and variable supply temperature operating strategy. The optimisation model was formulated using the FICO™ Xpress optimisation suite. The objective of optimisation was to minimise the annual total energy consumption and costs. Using each operating strategy, the annual pump energy consumption, heat losses and the equivalent annual cost were found and compared. A variable flow and variable supply temperature operating strategy was found to be beneficial in all cases. Design cases with minimum annual total energy consumption and cost used small pipe diameters and large pressure drops. Further, by increasing temperature difference between supply and return pipes, the annual total energy consumption and the equivalent annual cost were reduced. [Copyright &y& Elsevier]