Search

Nanocrystalline powders of Lu2O3:Eu with the activator content varying in the range of 0.2–10% were prepared through a combustion technique. The powders were only slightly agglomerated and the size of crystallites were about 30 nm. Some of the powders were co-doped with Mg, Ca, Sr, Ba, La of various concentrations. Such powders were cold-pressed and sintered at 1750°C for 5 h in vacuum. X-ray-excited luminescence spectra of both the powders and the sintered ceramics were recorded and the efficiency was compared to the commercial standard Gd2O2S:Pr,Ce,F X-ray phosphor. It was found that the nanocrystalline powders of Lu2O3:Eu,Ca emit photons four-times less than the commercial micron-sized Gd2O2S:Pr,Ce,F powder. In the case of sintered materials the emission efficiency from our Lu2O3:Eu5%, Ca was roughly equal to the efficiency of the commercial-sintered Gd2O2S:Pr,Ce,F. The co-doping ions were shown to have various effects on the transparency of the sintered Lu2O3:Eu. Mg hindered the sintering process producing completely opaque pellets. Other ions facilitated the sintering course and the best results were obtained by co-doping the samples with 0.5% of Ba. Sr and La also significantly stimulated the sintering and the final pellets were only slightly cloudy. [Copyright &y& Elsevier]

Abstract: La2Hf2O7 nanopowders doped with different Pr concentrations (0.05–10mol.%) were synthesized by the Pechini method. XRD measurements confirmed the single crystalline phase formed already at 800°C and the structure was cubic pyrochlore. Luminescence excitation and emission as well as radioluminescence spectra were recorded for the materials. Both optical and X-ray excitation of La2Hf2O7:Pr produced a red emission resulting from the 4f–4f transitions of Pr3+ ions. Luminescence of materials synthesized at low temperatures was characterized by broadband glass-type emissions, while heat treatment at 1400°C led to spectra showing the typical for crystalline hosts narrow and intense 4f–4f transitions of Pr3+. [Copyright &y& Elsevier]

Abstract: Molten salt synthesis procedure, homogeneous precipitation with urea and -flux aided routes are presented as interesting fabrication methods for making oxide luminescent materials. The properties of the powders made using these techniques are presented and analyzed. Emphasis is put on spectroscopic characterization of the products. [Copyright &y& Elsevier]

The aim of this study was to characterize the immunohistological components of chronic inflammation in endarterectomy lesions. Therefore, in 24 patients endarterectomy specimens were obtained from coronary arteries during CABG surgery (16 from RCA and 8 from LCA) and immunohistologically analyzed using avidin-biotin method (LSAB®/AP) with monoclonal antibodies. Macrophages and CD3 lymphocytes were counted under 200× magnification but MHC class II and ICAM-1 adhesion molecules were analyzed semi-quantitatively (scale from 0 to 3+). The mean macrophages density was 47.8±9.8 cells per mm2 and mean CD3 lymphocyte density was 1.3±0.6 cells per mm2. Lack or weak expression of HLA-DR (0–1+) on macrophages was found in 17 of 24 cases (70.8%). In the remaining seven cases (29.2%) there was a moderate and strong expression (2+ and 3+) of HLA-DR antigens. Similarly, no or weak ICAM-1 expression on macrophages was detected in 19 cases (79.2%). These cells were positively stained for ICAM-1 in only five cases (20.8%). Our data suggest that in advanced primary atherosclerotic lesions chronic inflammation is still present. On the other hand, the small number of activated inflammatory cells and the absence of positively stained endothelium suggests that inflammatory process tends to be burnt-out. [Copyright &y& Elsevier]