Search

Abstract: Finite element simulations have been performed to investigate the influence of linearly heated side wall(s) or cooled right wall on mixed convection lid-driven flows in a square cavity. It is interesting to note that multiple circulation cells appear inside the cavity with the increase of Pr for and in the case of linearly heated side walls. For , only two circulation cells are formed inside the cavity. As Pr increases to 0.7, three circulation cells are formed inside the cavity. Further increase in Pr to 10, leads to the formation of four circulation cells inside the cavity. On the other hand, only two circulation cells are formed inside the cavity for the case of cooled right wall. A detailed analysis of flow pattern shows that as the value of Re increases from 1 to , there occurs a transition from natural convection to forced convection depending on the value of Gr irrespective of Pr. It is observed that the secondary vortex at the top left corner disappears for and due to enhanced motion of the upper lid in the case of cooled right wall while a small secondary vortex exist at the bottom right corner in the case of linearly heated side walls. The local Nusselt number () plot shows that heat transfer rate is equal to 1 at the edges for the case of linearly heated side walls case and that is zero at the left edge and thereafter that increases for the case of cooled right wall. It is interesting to observe that is large within due to compression of isotherms for and 10 in the case of linearly heated side wall. It is also observed that or exhibits oscillations especially for at higher Gr due to the presence of multiple circulations. It is also observed that or vs Gr plots show oscillation for two case studies. Average Nusselt numbers at the bottom and right walls are strong functions of Grashof number at larger Prandtl numbers whereas average Nusselt number at the left wall at a specific Pr is a weaker function of Gr. [Copyright &y& Elsevier]