195 results on '"Li, Gensheng"'
Search Results
2. Hard rock drilling characteristics under axial-torsional isofrequency impact: Insights for improving efficiency of deep energy mineral excavation
3. Current status and construction scheme of smart geothermal field technology
4. Large-scale physical simulation of injection and production of hot dry rock in Gonghe Basin, Qinghai Province, China
5. Super-resolution reconstruction of 3D digital rocks by deep neural networks
6. Numerical investigation of flow patterns in cuttings transport for extended-reach horizontal wells with rotation drillpipe
7. CFD-DEM modeling and analysis study of proppant transport in rough fracture
8. Numerical analysis on the failure characteristics of hot dry rock subjected to axial-torsional coupled percussion with single cutter
9. Real-time prediction of logging parameters during the drilling process using an attention-based Seq2Seq model
10. Optimization of fracturing stages/clusters in horizontal well based on unsupervised clustering of bottomhole mechanical specific energy on the bit
11. Bottom hole pressure prediction based on hybrid neural networks and Bayesian optimization
12. Convergence analysis of Lattice Boltzmann method for Stokes flow in digital rock characterization
13. Review of high-temperature geothermal drilling and exploitation technologies
14. Wide and deep cross network for the rate of penetration prediction
15. CO2 huff-n-puff combined with radial borehole fracturing to enhance oil recovery and store CO2 in a shale oil reservoir
16. Experimental research on the erosion characteristics of organ-pipe cavitating jet for hydrate-bearing sediments
17. Numerical simulation of three-dimensional fracturing fracture propagation in radial wells
18. A physics-constrained data-driven workflow for predicting bottom hole pressure using a hybrid model of artificial neural network and particle swarm optimization
19. Gas adsorptions of geological carbon storage with enhanced gas recovery
20. Real-time and multi-objective optimization of rate-of-penetration using machine learning methods
21. Accumulation pattern and risk assessment of metal elements in permafrost-affected soils on the Qinghai-Tibet Plateau
22. Multi-objective balanced method of optimizing the heat extraction performance for hot dry rock
23. Experimental study on dynamic characteristics of axial-torsional coupled percussive drilling
24. Field test of radial jet drilling technology in a surface formation
25. Proppant Transport Characteristics in Tortuous Fractures Induced by Supercritical CO2 Fracturing
26. Experimental investigation of proppant transport in hydraulically fractured wells using supercritical CO2
27. Settling behavior of spherical particles in vertical annulus: Experimental study and model development
28. Detached eddy simulation on the structure of swirling jet flow field
29. A unified equation of settling velocity for particles settling in cylinder, annulus and fracture
30. Real-time prediction of rate of penetration by combining attention-based gated recurrent unit network and fully connected neural networks
31. Prediction of filtration performance of compressed fibrous media
32. Mechanism research and field test of a novel axial vibratory tool for friction reduction in long horizontal wells
33. Effect of proppant treatment on heat extraction performance in enhanced geothermal system
34. Predicting wall drag coefficient and settling velocity of particle in parallel plates filled with Newtonian fluids
35. A novel approach to optimising well trajectory in heterogeneous reservoirs based on the fast-marching method
36. Settling behavior of non-spherical particles in power-law fluids: Experimental study and model development
37. Cracks imaging in linear cutting tests with a PDC cutter: Characteristics and development sequence of cracks in the rock
38. Laboratory experiments on blockage removing and stimulation of CBM reservoirs by composite pulsating hydraulic fracturing of radial horizontal wells
39. Mechanism analysis of friction reduction in coiled tubing drilling with axial vibratory tool
40. A semi-analytical model for simulation of fluid flow in tight rock with irregular fracture geometry
41. Optimization of multilateral well configuration in fractured reservoirs
42. Aspect ratio of spalls of granite in flame-jet spallation and its effect on the modeling prediction of spallation properties
43. Imaging the formation process of cuttings: Characteristics of cuttings and mechanical specific energy in single PDC cutter tests
44. A semi-analytical method for the multilateral well design in different reservoirs based on the drainage area
45. Numerical simulation of reaction under high pressure conditions for thermal spallation drilling
46. Experiment on coal breaking with cryogenic nitrogen jet
47. Fluid hammer analysis with unsteady flow friction model in coiled tubing drilling
48. Experimental analysis on characteristics of micro-structure and mineralogy changes in thermal spallation drilling
49. Effect of proppant addition schedule on the proppant distribution in a straight fracture for slickwater treatment
50. A fractal production prediction model for shale gas reservoirs
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.