Search

Abstract: For crime scene investigation in cases of homicide, the pattern of bloodstains at the incident site is of critical importance. The morphology of the bloodstain pattern serves to determine the approximate blood source locations, the minimum number of blows and the positioning of the victim. In the present work, the benefits of the three-dimensional bloodstain pattern analysis, including the ballistic approximation of the trajectories of the blood drops, will be demonstrated using two illustrative cases. The crime scenes were documented in 3D, using the non-contact methods digital photogrammetry, tachymetry and laser scanning. Accurate, true-to-scale 3D models of the crime scenes, including the bloodstain pattern and the traces, were created. For the determination of the areas of origin of the bloodstain pattern, the trajectories of up to 200 well-defined bloodstains were analysed in CAD and photogrammetry software. The ballistic determination of the trajectories was performed using ballistics software. The advantages of this method are the short preparation time on site, the non-contact measurement of the bloodstains and the high accuracy of the bloodstain analysis. It should be expected that this method delivers accurate results regarding the number and position of the areas of origin of bloodstains, in particular the vertical component is determined more precisely than using conventional methods. In both cases relevant forensic conclusions regarding the course of events were enabled by the ballistic bloodstain pattern analysis. [Copyright &y& Elsevier]

Abstract: Beer bottles are often used in physical disputes. If the bottles break, they may give rise to sharp trauma. However, if the bottles remain intact, they may cause blunt injuries. In order to investigate whether full or empty standard half-litre beer bottles are sturdier and if the necessary breaking energy surpasses the minimum fracture-threshold of the human skull, we tested the fracture properties of such beer bottles in a drop-tower. Full bottles broke at 30J impact energy, empty bottles at 40J. These breaking energies surpass the minimum fracture-threshold of the human neurocranium. Beer bottles may therefore fracture the human skull and therefore serve as dangerous instruments in a physical dispute. [Copyright &y& Elsevier]

Abstract: Accidental or intentional falls from a height are a form of blunt trauma and occur frequently in forensic medicine. Reports describing elevator accidents as a small subcategory of falls from heights are rare in the medical literature and no report on injury patterns or scene reconstruction of such an accident was found. A case of an accident in a hydraulic elevator with a man falling 3m was examined using post-mortem multi-slice computed tomography (MSCT) and autopsy. The man suffered an unusually extensive trauma and died at the scene. Post-mortem MSCT examination showed a comminute fracture of the skull, the right femur and the first lumbar vertebra. Severe lacerations of the brain with epidural, subdural and subarachnoidal haemorrhages over both hemispheres were diagnosed. Autopsy confirmed these findings. To reconstruct the accident we used radiological and autopsy results as well as findings at the scene. [Copyright &y& Elsevier]

Abstract: The lynx, which was reintroduced to Switzerland after being exterminated at the beginning of the 20th century, is protected by Swiss law. However, poaching occurs from time to time, which makes criminal investigations necessary. In the presented case, an illegally shot lynx was examined by conventional plane radiography and three-dimensional multislice computertomography (3D MSCT), of which the latter yielded superior results with respect to documentation and reconstruction of the inflicted gunshot wounds. We believe that 3D MSCT, already described in human forensic-pathological cases, is also a suitable and promising new technique for veterinary pathology. [Copyright &y& Elsevier]

In order to create and study blunt force wound morphology, a “skin–skull–brain model” had to be designed which would make the laboratory reproduction of a blunt force injury to the head possible. During the evaluation of the “skin–skull–brain model”, it was possible to show that injuries inflicted to this model are fully comparable to the morphology of equivalent real blunt forces injuries to humans. Utilization of the “skin–skull–brain model” presents some significant advantages: the model is inexpensive, easy to construct, instantly available for use, and eliminates ethics conflicts. The main advantage of such a model is, in comparison with biological substances, the high reproducibility of experimentally inflicted traumas. [Copyright &y& Elsevier]

Abstract: When analysing blood spatters, traces often occur which regarding the collision angle, cannot be allocated to any supposed centre of origin. Drops following highly curved (ballistic) trajectories usually form these types of traces. The reconstruction of such trajectories requires knowledge of the mass, the diameter (of which approximations are known) and the velocity of the blood drops. This article provides an upper range of the velocity in relation to the diameter of the blood drops based on physical laws. This is very helpful in analysing ballistic trajectories. [Copyright &y& Elsevier]

Abstract: During a Christmas party, two male guests started fighting. The perpetrator was allegedly pushed onto a glass table by the victim or fell into the table together with that man so that the glass top broke and caused a cut wound on the perpetrator''s back. According to his statement he then threw a fragment of the broken glass table in the direction of the other man hitting him accidentally in a way so that the subclavian artery was severed and he died from exsanguination. Tests on the breaking characteristics of the glass table, the flying behaviour and the kinetics of thrown glass fragments conducted on various models supported the conclusion that the fatal injury on the victim''s neck could not have been caused by a thrown glass fragment. It was much more likely that a stab with a blade-shaped glass fragment was the cause of the fatal injuries. [Copyright &y& Elsevier]

Abstract: At a party of a sports club, an argument started between two groups of young men, in the course of which one of the persons involved threw a beer glass hitting a young man of the other group, who collapsed with a profusely bleeding wound. Although resuscitation measures were initiated immediately, the victim died at the scene due to exsanguination from the completely severed left external carotid artery in combination with the aspiration of blood. Tests with drinking glasses thrown at a skull–neck model suggested that an undamaged beer glass thrown at the head of the victim could not cause the fatal injuries on the neck because of its splintering behaviour. In fact, it seemed that the beer glass had been damaged prior to throwing it and that its sharp edges perforated the skin on hitting the neck. [Copyright &y& Elsevier]

Water buffaloes and cattle differ considerably with respect to the anatomy of the head. As a result, captive bolt stunners often fail to reliably produce adequate loss of consciousness in water buffaloes and, thus, do not fulfill animal welfare requirements. The goal of the present study was to assess and validate a new stunning device for water buffaloes meeting animal welfare and occupational safety requirements. The newly designed bullet casing gun uses .357 Mag/10.2 g hollow point bullets and has additional safety features. Its effectiveness and usability were assessed under practical conditions in an abattoir as based on widely accepted criteria. Stunning resulted in deep unconsciousness in 19 out of 20 water buffaloes. One 9-year old male did not immediately collapse. Except for very old bulls, the device presented herewith provides a means to stun water buffaloes of both sexes effectively and reliably while keeping occupational hazards to a minimum. [ABSTRACT FROM AUTHOR]

Stock management of the Swiss water buffalo livestock results in the slaughtering of about 350 animals per year. As the stunning of water buffaloes still is an unresolved issue, we investigated the terminal ballistics of currently used perforating stunning devices. Cartridge fired captive bolt devices, handguns and a bullet casing gun were tested in a shooting steep by firing on bisected heads, forehead plates and soap blocks. Energy loss of captive bolts confirmed their inadequacy when used for heavy water buffaloes, notably adult males. As for the free projectiles, ballistics revealed that beyond the impact energy, bullet deformation has a strong impact on the outcome. Light 9 mm Luger or .38 Spl bullets as well as large deformable .44 Rem. Magnum bullets should be avoided in favor of heavier .357 Magnum deformation ammunition. These data have been translated into the development of a new stunning device for water buffaloes meeting both animal welfare and occupational safety requirements. [ABSTRACT FROM AUTHOR]

Owing to the demand for genuine mozzarella, some 330 water buffaloes are being slaughtered every year in Switzerland albeit a stunning procedure meeting animal welfare and occupational safety requirements remains to be established. To provide a basis for improvements, we sized anatomical specifics in water buffaloes and cattle and we assessed brain lesions after stunning with captive bolts or handguns by diagnostic imaging. In water buffaloes and cattle, the median distance from the frontal skin surface to the inner bone table was 74.0 mm (56.0–100.0 mm) vs 36.6 mm (29.3–44.3 mm) and from skin to the thalamus 144.8 mm (117.1–172.0 mm) vs 102.0 (101.0–121.0 mm), respectively. Consequently, customary captive bolt stunners may be inadequate. Free bullets are potentially suitable for stunning buffaloes but involve occupational safety hazards. The results of the present study shall be used to develop a device allowing effective and safe stunning of water buffaloes. [ABSTRACT FROM AUTHOR]

Because the use of radiology in modern forensic medicine has been, until today, mostly restricted to conventional X-rays, which reduces a 3D body to a 2D projection, a detailed 3D documentation of a gunshot’s wound ballistic effects was not possible. The aim of our study was to evaluate whether the progress in imaging techniques over the last years has made it possible to establish an observer-independent and reproducible forensic assessment using multi-slice computed tomography (MSCT) and magnetic resonance imaging (MRI) technologies for the documentation and analysis of gunshot wounds. The bodies of eight gunshot victims were scanned by MSCT and by MRI; the data of these imaging techniques were post-processed on a workstation, interpreted and subsequently correlated with the findings of classical autopsy.With the spiral CT and MRI examinations and the subsequent 2D multi-planar reformation (MPR) and 3D shaded surface display (SSD) reconstruction, the entire gunshot-created complex skull fractures and brain injuries (such as wound channels and deeply-driven bone splinters) could be documented in complete and graphic detail. CT and MRI also documented vital reaction to the gunshot by demonstrating air emboli in the heart and blood vessels and the classic pattern of blood aspiration to the lung. Gunshot residues deposited within and under the skin were visible.In conclusion, we think that the radiological methods of MSCT and MRI have the potential to become a routine “virtual autopsy” tool in the future. Bullets and relevant histological samples from specific sites then might be won in image-guided minimally invasive fashion via percutaneous biopsy. The rapid application of developing radiological methods may lead to new horizons in forensic documentation and intravital as well as postmortem examination. [Copyright &y& Elsevier]