Search

Carbon fiber composites are prohibitively expensive for a wide array of applications that would greatly benefit from their superior specific strength and specific stiffness. Replacing the market-dominant carbon fiber precursor material, polyacrylonitrile, with a low-cost alternative would significantly reduce the cost of carbon fiber production. Commodity polymers may provide such an alternative thanks to their abundance and ease of production into fibers. This review presents state-of-the-art carbon fiber production from polyacrylonitrile, an overview of melt-spinnable alternative precursors broadly, and an in-depth review of the latest advances in the synthesis of carbon fibers from low-cost, commodity thermoplastics such as polyethylene, polyamide, polystyrene, polyester, and poly(vinyl chloride). [Display omitted] [ABSTRACT FROM AUTHOR]

Carbon fiber (CF) is a versatile material renowned for its excellent mechanical, thermal, and electrical properties. Polyacrylonitrile (PAN)-based CFs dominate the market in part due to their high tensile strength, rendering them suitable for structural applications in a wide variety of applications ranging from sporting goods to aerospace. Over five decades of commercial development of PAN-based CF has resulted in a range of varieties with different tensile moduli and tensile strengths. The microstructures, nanostructures, and crystal structures of PAN-based CF all play pivotal roles in the macroscale properties of this material. In particular, the crystal structure and crystallite orientation in CF is closely related to the mechanical properties. The crystal structure of PAN-based CF generally consists of turbostratic carbon, a disordered form of graphite, the characteristics of which can be effectively characterized in a bulk format through wide-angle x-ray diffraction (WAXD). In this work, we employed a three-part approach to the analysis of WAXD patterns collected from four intermediate modulus PAN-based CFs. The approach incorporates a Scherrer analysis, a Debye analysis, and an orientational analysis to provide precise estimates of crystallite sizes, crystallite distributions, and crystallite orientations with the fiber axis. The results presented here suggest that intermediate modulus PAN-based CF mostly consists of small turbostratic crystallites (<4 nm), with larger crystallites having increased orientation with the fiber axis. The results here imply the presence of curvature and/or wrinkling of the turbostratic layers within the CF structure. [Display omitted] [ABSTRACT FROM AUTHOR]

A mechanism of coated, curved substrate failure is characterized via a C-ring compression test and multiscale modeling analysis. Coating crack formation is driven by sudden through-thickness cleavage in accordance with Mode I fracture type. The fracture is arrested at the coating/substrate interface. The cracks continue to widen as the underlying substrate experiences periodic regions of high stress under the crack and regions of relaxed stresses under the remaining intact coating. An analytical, closed form solution model developed via curved beam theory captures the hoop stress in the axis transverse to external loading and predicts the external load at crack initiation. After the onset of cracking, the system transitions to cleavage driven failure, which is simulated via element deletion failure in a small-scale explicit dynamics finite element model. The macroscale explicit dynamics finite element model, analytical solution, and bulk experimental results agree. The correlation between coating microstructure and deposition method is also investigated and reveals that high interfacial roughness and equiaxed grain morphology correspond to higher loader carrying capability and lower crack density while low interfacial roughness and smooth columnar grains correspond to higher strain to coating failure. [ABSTRACT FROM AUTHOR]

Synthetic fibers, such as Kevlar fibers, SiC fibers, and carbon fibers, are essential components for constructing high performance structures. Whether for engineering, sports, energy storage (batteries and supercapacitors), or aerospace applications, fiber microstructure plays a critical role in fiber properties and functionalities. However, studying fiber nozzle configurations and spinning parameters to achieve the desired microstructure remains challenging, costly, and time consuming. Here, mesophase pitch-derived fibers were used as an example to demonstrate that low cost, commercially available 3D printer nozzles can "print" fibers. Four different nozzles were used to "print" fibers and the effects of their features on fiber properties were observed and compared to other lab spun and commercial pitch-derived CF. A longer orifice length resulted in higher modulus fiber whereas a larger draw-down ratio yielded a stronger fiber. The findings provide a new opportunity for 3D printer hardware application and open opportunities for developing low-cost fibers. [Display omitted] [ABSTRACT FROM AUTHOR]